Our Products
Tractor Mowers
1 Products availableTiller
1 Products availableWe are leaders in the market for providing best range of Pull Type snow blowers, Bio Compost Mixer Machine, Horizontal Mixers Truck, snow blowers and Single Auger snow blowers
Tired of driving in reverse when blowing snow? Try our pull type versions, built with the same specifications as our regular single auger snowblowers, but in a pull type configuration. All models come standard with hydraulic chute rotator (cylinder or orbital motor depending on model) and single section spout deflector.
MODEL SIZE | S5PT | S6PT | S65PT | S7PT | S75PT | S100PT |
Approx. Weight (Lbs.) | 560 | 595 | 885 | 920 | 995 | 1410 |
Cutting Width | 60 | 72 | 78 | 84 | 90 | 100 |
Cutting Height | 24 | 24 | 30 | 30 | 30 | 33 |
Fan Shaft Diameter | 1 3/8 | 1 3/8 | 40 mm | 40 mm | 40 mm | 1 3/4 |
Fan Blades | 4 | 4 | 4 | 4 | 4 | 4 |
Fan Diameter | 22 | 22 | 26 | 26 | 28 | 28 |
Fan Housing Width | 8 | 8 | 8 | 8 | 8 | 12 |
Fan Housing (thickness) | 10 ga. | 10 ga. | 10 ga. | 10 ga. | 10 ga. | 3/16 |
Auger Diameter | 14 | 14 | 17 | 17 | 17 | 20 |
Auger Shaft Diameter | 1 1/4 | 1 1/4 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 |
Auger Flighting Thickness | 5/16 | 5/16 | 1/2 | 1/2 | 1/2 | 1/2 |
Auger Chain Size | #60 | #60 | #60 | #60 | #60 | #80 |
Chute Diameter | 12 | 12 | 12 | 12 | 12 | 13 |
Chute Length | 36 | 36 | 48 | 48 | 48 | 48 |
Hydraulic Chute Rotator | Stan. | Stan. | N/A | N/A | N/A | N/A |
Orbital Chute Rotator | Opt. | Opt. | Stan. | Stan. | Stan. | Stan. |
Spout Deflector (single) | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. |
Hitch Category | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 2 |
Recommended H.P. (min) | 20 | 20 | 35 | 40 | 50 | 80 |
Recommended H.P. (max) | 35 | 35 | 70 | 70 | 90 | 105 |
Unless otherwise indicated, all dimensions are in inches with standard equipment installed.
Specifications subject to change without notice.
Certain features shown may be optional.
In this age of growing environmental protection, disposing of and reusing waste products is becoming increasingly important.
LuckNow is pleased to be a part of the process of turning compost and sludge into useable products such as potting soil. We will custom modify any of our four-auger or vertical mixers to handle mixing of compost and sludge.
Possible Modifications include
All stainless steel liners (available for the entire inner lining of the tub)
Most specifications are the same as standard mixers but with certain applications, modifications are made to meet customers requirements.
For more information on these types of mixers, contact our most active dealer in this field:
Have ItYour Way
All the models listed below have the option to be mounted on a truck, allowing you to be more flexible and versatile.
A wide variety of options are available.
Contact us for full details and truck specifications.
MODEL SIZE | 4400 | 4500 | 4550 | 4625 | 4750 | 4900 |
Base Mixing Capacity (cubic feet) |
440 | 500 | 550 | 625 | 750 | 900 |
Overall Length | 195 1/2 | 219 1/2 | 195 1/2 | 219 1/2 | 219 1/2 | 267 1/2 |
Mixer Height | 72 1/2 | 72 1/2 | 81 1/2 | 81 1/2 | 87 1/2 | 87 1/2 |
Overall Height | 79 | 79 | 90 | 90 | 96 | 96 |
Tread Width | 96 | 96 | 96 | 96 | 96 | 96 |
Discharge Length | 36 | 36 | 36 | 36 | 36 | 36 |
Cab to Axle Min. | *125 / **103 | *147 / **127 | *125 / **106 | **130 | **130 | **164 |
Cab to Frame Min. | *158 / **158 | *180 / **180 | *158 / **158 | **180 | **180 | **226 |
Hopper Size | 84x168 | 84x192 | 87x168 | 87x192 | 96x192 | 96x240 |
Bottom Augers- Tube | 8 5/8 | 8 5/8 | 8 5/8 | 8 5/8 | 8 5/8 | 10 3/4 |
Bottom Augers - Flighting | 1/2 & 5/8 | 1/2 & 5/8 | 1/2 & 5/8 | 1/2 & 5/8 | 1/2 & 5/8 | 3/4 |
Bottom Augers - Diameter | 24 | 24 | 30 | 30 | 30 | 30 |
Top Augers - Tube | 6 5/8 | 6 5/8 | 6 5/8 | 6 5/8 | 6 5/8 | 8 5/8 |
Top Augers - Flighting | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 1/2 |
Top Augers - Diameter | 24 | 24 | 28 | 28 | 28 | 30 |
Shaft Diameter - Drive Bottom | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 |
Shaft Diameter - Drive Top | 3 | 3 | 3 | 3 | 3 7/16 | 3 7/16 |
Bearings Drive | SFCW | SFCW | SFCW | SFCW | SFCW | SFCW |
Sprockets Drive | S Taper | S Taper | S Taper | S Taper | S Taper | S Taper |
Scale Chains | 4 Point | 4 Point | 4 Point | 4 Point | 4 Point | 4 Point |
Roller Chains | 100-140 | 100-140 | 100-160 | 100-160 | 100-160H | 120-160H |
Approx. Weight (lbs.) | 12,700 | 13,800 | 16,500 | 19,400 | 20,200 | 24,500 |
Light duty, long lasting single auger snowblowers for today's compact estate tractors.
Cutting widths of 48" & 52" to quickly clear your sidewalks and driveways.
Manual and hydraulic chute rotators available for operator convenience.
MODEL SIZE | L48 | L52 |
Approx. Weight (Lbs.) | 315 | 330 |
Cutting Width | 48" | 52" |
Cutting Height | 21" | 21" |
Fan Shaft Diameter | 1" | 1" |
Fan Blades | 3 | 3 |
Fan Diameter | 20" | 20" |
Fan Housing Width | 7" | 7" |
Fan Housing (thickness) | 12 ga. | 12 ga. |
Auger Diameter | 14" | 14" |
Auger Shaft Diameter | 1 1/4” | 1 1/4” |
Auger Flighting Thickness | 5/16” | 5/16” |
Auger Chain Size | #50 | #50 |
Chute Diameter | 10” | 10” |
Chute Length | 36” | 36” |
Hydraulic Chute Rotator | Opt. | Opt. |
Hitch Category | 1 | 1 |
Recommended H.P. (min) | 12 | 12 |
Recommended H.P. (max) | 20 | 20 |
Single auger snowblowers for a wide range of tractor sizes.
Cutting widths of 60" to 108"
Manual and hydraulic chute rotator (hydraulic cylinder or orbital motor) available on most models (refer to spec sheet for configurations).
Heavy augers and shaft, 4 blade fan, greaseable bearings, heavy duty gearbox, tapered roller bearings.
Available options include spout deflectors, skid shoes, cutting edge and more
MODEL SIZE | S5 | S6 | S65 | S7 | S75 | S100 | S9 |
Approx. Weight (Lbs.) | 510 | 545 | 885 | 920 | 995 | 1430 | 1570 |
Cutting Width | 60 | 72 | 78 | 84 | 90 | 100 | 108 |
Cutting Height | 24 | 24 | 30 | 30 | 30 | 33 | 33 |
Fan Shaft Diameter | 1 3/8 | 1 3/8 | 40mm | 40mm | 40mm | 1 3/4 | 1 3/4 |
Fan Blades | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
Fan Diameter | 22 | 22 | 26 | 26 | 28 | 28 | 28 |
Fan Housing Width | 8 | 8 | 8 | 8 | 8 | 12 | 12 |
Fan Housing (thickness)17 | 10 ga. | 10 ga. | 10 g.a | 10 ga. | 10 ga. | 3/16 | 3/16 |
Auger Diameter | 14 | 14 | 17 | 17 | 17 | 20 | 20 |
Auger Shaft Diameter | 1 1/4 | 1 1/4 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 |
Auger Flighting Thickness | 5/16 | 5/16 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
Auger Chain Size | #60 | #60 | #60 | #60 | #60 | #80 | #80 |
Chute Diameter | 12 | 12 | 12 | 12 | 12 | 13 | 13 |
Chute Length | 36 | 36 | 36 | 36 | 36 | 48 | 48 |
Hydraulic Chute Rotator | Opt. | Opt. | N/A | N/A | N/A | N/A | N/A |
Orbital Motor Chute Rotator | Opt. | Opt. | Opt. | Opt. | Opt. | Stan. | Stan. |
Spout Deflector (Single) | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. |
Hitch Category | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 2 | 2 |
Recommended H.P. (min) | 20 | 20 | 35 | 40 | 50 | 80 | 80 |
Recommended H.P. (max) | 35 | 35 | 70 | 70 | 90 | 105 | 105 |
Double auger snowblowers for a wide range of tractor sizes. Standard orbital motor chute rotator and single section spout deflector. Heavy augers and shaft, 4 blade fan, greaseable bearings, heavy duty gearbox, tapered roller bearings. Available options include spout deflectors, skid shoes, reinforced end plates, telescopic chute and more
MODEL SIZE | D7 | D75 | D8 | D85 | D9 | D10 |
Weight | 1195 | 1530 | 1545 | 1735 | 2130 | 3220 |
Cutting Width | 84 | 90 | 96 | 102 | 108 | 120 |
Cutting Height | 36 | 36 | 36 | 36 | 36 | 44 |
Fan Shaft Diameter | 40 mm | 1 ¾ | 1 ¾ | 2 | 2 | 2 |
Fan Blades | 4 | 4 | 4 | 4 | 4 | 6 |
Fan Diameter | 28 | 28 | 28 | 30 | 32 | 34 |
Fan Housing Width | 8 | 12 | 12 | 12 | 12 | 12 |
Fan Housing (thickness) | 10 ga. | 3/16 | 3/16 | 3/16 | 3/16 | 3/16 |
Auger Diameter | 17 | 17 | 17 | 17 | 17 | 20 |
Auger Shaft Diameter | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 | 1 3/4 |
Auger Flighting Thickness | ½ | ½ | ½ | ½ | ½ | ½ |
Auger Chain Size | #60 | #80 | #80 | #80 | #80 | #80 |
Chute Diameter | 12 | 13 | 13 | 13 | 13 | 15 |
Chute Length | 36 | 48 | 48 | 48 | 48 | 48 |
Orbital Motor Chute Rotator | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. |
Spout Deflector (Single) | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. |
Hitch Category | 1 & 2 | 2 | 2 | 2 | 2 | 2 |
Recommended H.P. (min) | 70 | 80 | 90 | 100 | 120 | 140 |
Recommended H.P. (max) | 90 | 105 | 115 | 150 | 160 | 180 |
H.P. recommendations are suggested only (pending snow and ground speed conditions and transmission type)
Unless otherwise indicated, all dimensions are in inches with standard equipment installed.
Specifications subject to change without notice.
Certain features shown may be optional.
LuckNow can custom fit any of its already renowned standard rear mount snowblowers to be front mounted to most tractors.
Some of the benefits of having a front mount snowblower are:
Due to the number of different variations and options available on tractors, all of our front mount snowblowers are custom fit to each individual tractor. As a result, we need the exact tractor or an identical duplicate from a local dealer at our manufacturing facilities in Lucknow, Ontario to custom fit the snowblower to it.
In most cases, tractors with rear mount, mid mount or front mount PTOs can have snowblowers fitted to them.
For quick responses it is best to have details on your tractor at hand that you can supply to us: dimensions (including ground clearance, axle widths, overall tire widths and wheelbase), PTO information (including rotation speed and direction), pictures of the tractor showing the front end and ground clearance.
LuckNow's Material Handler can be used to spread/discharge materials up to 16' away. 7 cubic yard capacity.
MaterialsSand, sawdust, bark, mulch, small pea gravel, potash & landscaping mixed soil.
Applications:After considerable market demand, LuckNow Products is proud to reintroduce its line of Bale Processors to augment its time proven mixer feeder line.
The new and improved BP744 model has a 7 foot diameter tub capable of processing all of the round or square hay and straw bales you can throw at it. It includes a discharge side capable of spreading processed material up to 40 ft away with a 10 ft wide spread and an opposite side capable of piling into windrows.
Built with the same rugged and reliable design like all other LuckNow Products, the new Bale Processor will keep on processing for years to come.
For 30 years, LuckNow rotary mowers have been know as one of the heaviest rough cut rotary mowers available on the market.
Available in 72 & 84" cutting width models. Ideal for clearing grass, weeds and light brush around the property.
All welded, heavy duty construction.
Includes a third link that will help follow the contour of your property for all your farm grass maintenance.
Heavy duty gearbox with a slip clutch PTO.
Uplift blades for a more consistent cut.
Models | R72H | R84H |
Cutting Width | 72" | 84" |
Weight | 890 lbs | 1075 lbs |
Cutting Height | 4” to 12” | 4” to 12” |
Uplift Blades | ½” x 4” | ½” x 4” |
PTO | #5 with slip clutch | #5 with slip clutch |
Horsepower | 40 to 85 hp | 40 to 85 hp |
Hitch | Category 1 & 2 | Category 1 & 2 |
Tire | 16” laminated rubber | 16” laminated rubber |
Steel | 10 Ga. on sides | 10 Ga. on sides |
Steel | 3/16 reinforced on top | 3/16 reinforced on top |
LuckNow has taken their nearly 50 years of experience in farm implement manufacturing to create a 3 point hitch, heavy duty rotary tiller that is PTO driven with a gear drive drop box design.
Available in widths of 50", 58, 66, 74 & 82" LuckNow has a rotary tiller to match your tractor horse power.
LuckNow Rotary Tillers are one of the heaviest, most reliable rotary tillers on the market and ready to roll through your toughest soil conditions.
Model | BRT-350 | BRT-358 | BRT-366 | BRT-374 | BRT-382 |
Working Width | 50” | 58” | 66” | 74” | 82” |
Blades per flange | 6 | 6 | 6 | 6 | 6 |
Drive | Gear | Gear | Gear | Gear | Gear |
Horse Power | 15-50 | 15-50 | 30-50 | 30-50 | 30-50 |
Weight (Approx) | 505 lbs. | 545 lbs | 589 lbs | 645 lbs | 705 lbs |