Lubi Industries Llp

D Colony, Ahmedabad, Gujarat

Lubi BrandSubmersible Motoris manufactured in ISO 9001 design with NEMA Standard. Submersible motor is available in Cast Iron, SS 304 & SS 316 construction. Submersible motors are built using advanced technology and components of superior quality that they ensure good mechanical strength and excellent electrical reliability. Submersible Motors are available in 50 as well as 60 Hz. Premium motors are the choice for dependable, maintenance-free operation and provide a long life for your submersible pump operation. Lubi Offers Submersible motor from 3 to 4 oil filled and from 3 to 10 water filled up to 250 HP

application

• Water supply
• Irrigation
• Civil
• Industrial
• Fire fighting

• Completely rewindable.
• Cooling and lubrication by non toxic fluid.
• Stainless steel outer shell and shaft.
• Maintenance free lubricated ball bearings.
• Mechanical shaft seal (Carbon/Ceramic) provided.
• High efficiency electrical design (lower operating cost).
• Tropicalized design (lower winding temperature).
• Single phase motors are permanent split capacitor motors.
• All single phase motors will require control box.
• NEMA coupling flange.
• Pressure compensation diaphragm

• Easily rewindable (wet wound) induction motor with PE insulated windings.
• Corrosion resistant stainless steel stator jacket and shaft.
• Water lubricated radial and axial thrust bearings.
• Counter thrust bearing.
• Motors are pre-filled with clean water + Glycol mixture.
• High efficiency electrical design (lower operating cost).
• Tropicalized design (lower winding temperature).
• 4 Single phase motors are capacitor start and run design.
• All 4 single phase motors will require control box.
• Pressure compensation diaphragm
• NEMA coupling flange.

• Easily rewindable (wet wound) induction motor with PE insulated windings.
• Completely stainless steel AISI 304 construction.
• Water lubricated radial and axial thrust bearings.
• Counter thrust bearing.
• Motors are pre-filled with clean water + Glycol mixture.
• Shaft extension made of stainless steel AISI 316.
• High efficiency electrical design (lower operating cost).
• Tropicalized design (lower winding temperature).
• 4 Single phase motors are capacitor start and run design.
• All 4 single phase motors will require control box.
• 6 NEMA coupling flange.
• Pressure compensation diaphragm

• Easily rewindable (wet wound) induction motor with PE insulated windings.
• Corrosion resistant stainless steel stator jacket and shaft.
• Water lubricated heavy duty radial and axial thrust bearings.
• Counter thrust bearing.
• Motors are pre-filled with clean water + Glycol mixture.
• High efficiency electrical design (lower operating cost).
• Tropicalized design (lower winding temperature).
• NEMA coupling flange.
• Pressure compensation diaphragm.

LBI SeriesThe Lubi LBI series are non-self priming, horizontal, single stage centrifugal, end-suction pumps.Pumps are available from 2.2 to 3.7 kW in single-phase and from 1.5 to 11 kW in three-phase power supply. Motor and pump are close coupled in a convenient and compact design for quick installation in limited space. The pump is fitted with a maintenance-free, mechanical shaft seal and single piece pump-motor shaft. The pumps have axial suction port and radial discharge port.

LBL SeriesLUBI 1440 RPM Monoblock pumping sets are specially manufactured to meet therequirement of Agriculture. The Impellers and volute chambers are designed for a wide rangeof total heads.LUBI Electric Motors, Which are incorporated with the Monoblock are designed in A Classinsulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material ofbest quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, For multiple purpose fan end shaft isextended and fitted with flat pulley.

LBH SeriesLubi 2880 RPM Centrifugal Monoblock pumpsets are manufactured as per IS : 9079 with strictquality control for years of efficient and reliable operation.

APPLICATION

For suitable liquids which are thin, clean, non-explosive, nonaggressive, not containing solid particles or fibers.For water supply systems and irrigation.For heating, cooling, air-conditioning and circulation plants.For civil, industrial and fire fighting applications.As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure).

FEATURES

Compact designEasy and simple installationUser-friendly operationLow noise levelReliable and robust constructionReliable water supplyBuilt-in motor protection, dry running protectionBack pull-out design which simplifies inspection & maintenanceCE marked.

The Lubi LCF pumps are Self Priming Centrifugal Feed Pump for Reverse Osmosis (RO). Motor and pump are close coupled in a convenient and compact design for quick installation in limited space. The pumps have axial suction port and radial discharge port .

APPLICATION

Reverse Osmosis (RO) systems
For clean liquids without abrasives, which are non-aggressive for the pump materials. (solids content up to 0.2%)
For water supply.
For heating, cooling, air-conditioning and circulation plants.
For civil and industrial applications.
For pressure boosting.
For watering gardens.

FEATURES

OPERATING CONDITIONS

Flow range : Up to 3.5 m/hHead range : Up to 35 metresAmbient temperature : Max. +50CLiquid temperature range : 0C to +90C

MOTOR

2-pole induction motor, 50 Hz (n = 2900 RPM)Single phase 230V +5% -15% with thermal protection.Insulation class F.Protection IP 44.Constructed in accordance with IEC 34.

1.) LHP SERIES PRESSURE BOOSTER PUMP It consist of our PCJ standard pump series. PCJ pumps are horizontal, single-stage, centrifugal, shallow-well self priming jet pumps. Pumps have suction port above pump axis and radial discharge port. The pump is fitted with a maintenance-free, mechanical shaft seal.

2.) LMF SERIES PRESSURE BOOSTER PUMP It consist of our MFHC standard pump series. MFHC pumps are non-self priming, horizontal, multi-stage, centrifugal pumps. Pumps have suction port above pump axis and radial discharge port. The pump is fitted with a maintenance-free, mechanical shaft seal.

3.) MH SERIES PRESSURE BOOSTER PUMP It consist of our MH standard pump series. MH pumps are non-self priming, horizontal, multi-stage, centrifugal pumps. Pumps have axial suction port and radial discharge port. The pump is fitted with a maintenance-free, mechanical shaft seal.

The Lubi LBI series are non-self priming, horizontal, single stage centrifugal, end-suction pumps.Pumps are available from 2.2 to 3.7 kW in single-phase and from 1.5 to 11 kW in three-phase power supply. Motor and pump are close coupled in a convenient and compact design for quick installation in limited space. The pump is fitted with a maintenance-free, mechanical shaft seal and single piece pump-motor shaft. The pumps have axial suction port and radial discharge port.

LBL SeriesLUBI 1440 RPM Monoblock pumping sets are specially manufactured to meet therequirement of Agriculture. The Impellers and volute chambers are designed for a wide rangeof total heads.LUBI Electric Motors, Which are incorporated with the Monoblock are designed in A Classinsulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material ofbest quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, For multiple purpose fan end shaft isextended and fitted with flat pulley.

LBH SeriesLubi 2880 RPM Centrifugal Monoblock pumpsets are manufactured as per IS : 9079 with strictquality control for years of efficient and reliable operation.

For suitable liquids which are thin, clean, non-explosive, nonaggressive, not containing solid particles or fibers.For water supply systems and irrigation.For heating, cooling, air-conditioning and circulation plants.For civil, industrial and fire fighting applications.As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure).

Compact designEasy and simple installationUser-friendly operationLow noise levelReliable and robust constructionReliable water supplyBuilt-in motor protection, dry running protectionBack pull-out design which simplifies inspection & maintenanceCE marked.