LUBCON ENGINEERS

Pune, Maharashtra

Lubcon Engineers Air Plus Oil Mix Lubrication System are designed for applications where minute amount of metered lubricant is required to be applied on a surface.

Lubcon Engineers Air Plus Oil Mix Lubrication System are designed for applications where minute amount of metered lubricant is required to be applied on a surface.

The lubricant is metered using an oil injector and is carried to the mixing block where the air and oil get mixed. The air breaks the oil into minute droplets and carries it to the lubrication point. The mixture is then passed through the nozzles creating a fine spray of oil which can be applied on any surface.

Air oil mix systems are used for conveyors, high speed spindle, band saw machines etc.

The advantages of air oil mix system over conventional mist system are:

More reliable than conventional venturi type mist systems

More eco friendly

More easily controllable

No dripping

Air Oil Mix

Lubcon Engineers are typically used in applications where a large number of lubrication points need to be lubricated from a single source.

Each central lubricating unit is connected to their distributors through two lines via the change over valves. The two (2) lines alternatively act as supply pressure line and return line connected to container.

conomical, easy to use and simple to install. These pumps are suitable for manual centralised lubrication system of light duty automatic machines such as small power presses, packing machines, die punching machines, milling machines, single spindle automats, looms, surface grinders, pouch filling machines, concrete pumps etc. Normally these pumps are suitable for 2-40 lubrication points.

Common Applications

For Manual Centralized Lubrication Systems - small power presses, packing machines, die punching machines, milling machines, single spindle automats, looms, surface grinders, pouch filling machines, concrete pumps etc.

Multiline Lubricator (also called Radial Lubricator or Multipoint Lubricator) is a user friendly and cost-effective solution for centralized and Automatic Grease Lubrication Systems of multiple points in a machine or equipment. Multiline Lubricator combines multiple pumps into a single entity sharing a common reservoir and common drive.

Common Applications

Rolling Mills, Calendering Machines, Sugar Mills, Cement plants, Hydroturbines, Stone Crushers, Forging Hammers, Batch Mixers

In single shot centralised lubrication system, amount of oil at each lubrication point is controlled by using the element known as METERING CARTRIDGE.

For each lubrication point at least one metering cartridge shall be used.

The metering cartridge is a kind of mini-cylinder with a check valve, where stroke of piston determines the amount of ejected oil. It is designed such that every time when pump is operated, it ejects out predetermined amount of oil. When pressure is released, the cartridge gets recharged. For proper recharging of metering cartridges there shall be a small time gap in between subsequent operations of pumps (min. 1 minute).

Maximum permissible pressure for metering cartridge is 40 Kg/cm2. Minimum working pressure is 8 Kg/cm2 and pressure shall drop to less than 1 Kg/cm2 in between successive operations.

Progressive Distributor Blocks are one of the most effective, reliable and foolproof distributors which are used in for lubrication. The feature that makes Cenlub Systems progressive so reliable is that if any of the lubrication point is blocked the entire Progressive Distributor Blocks stops functioning. With suitable monitoring device, this blockage is sensed and suitable warning is given to avoid running the machine without proper lubrication system. This way Cenlub Systems Progressive Blocks give a prior warning through which blockage can be detected and break downs can be avoided.

Common Applications

Steel Plants, Paper Plants, Heavy-Duty Power Presses, Printing Machines, Textile Machines, Packaging Machines, Metal Working, Material Handling Equipments, Injection Molding Machines, Mobile Equipments, Chassis Lubrication etc.