Lakshmi Trading Company

Ajmeri Gate, Delhi

We are offering Linear Guideway System (BR-A) to customers across the world. Quality analysts check the Guideway System on stringent quality parameters in order to ensure customers obtain an accurate, durable and reliable product.

Details :

• Built-in long life lubrication.

• Equal load capacities in four directions.

• Smooth running due to new ball re-circulation.

• High rigidity-4-row angular contact.

• International standard dimension.

• High accuracy Low friction Low maintenance.

• High speed, low noise.

• Integral all-round sealing.

• Interchangeability.

• Environment protection green production.

We are instrumental in offering the efficient Linear Guideway System (HSR 25CA) at nominal rates. The offered Linear Guideway System is produced by skilled professionals who adhere to all the quality norms during its manufacturing.

Details :

• Designing the Guide System
  
  • Examples of Arrangements of the Guide System
  • Method for Securing an LM Guide to Meet the Conditions

• Designing a Mounting Surface
  
  • Designing a Mounting Surface
  • Shoulder Height of the Mounting Base and the Corner Radius
  • Permissible Error of the Mounting Surface
  • Marking on the Master LM Guide and Combined Use

• Mounting the LM Guide
  
  • Mounting Procedure
  • Methods for Measuring Accuracy after Installation
  • Recommended Tightening Torque for LM Rails

• Seal and Metal scraper
• Laminated Contact Scraper LaCS
• Dedicated Bellows
• Dedicated LM Cover
• Cap C

• Plate Cover SV -- Steel Tape SP

• Removing/mounting Jig
• End Piece EP
• List of Parts Symbols
• Table of Supported Options by Models

• Dimensions of Each Model with an Option Attached
  
  • Seal Resistance Value
  • Resistance of LaCS
  • Maximum Seal Resistance of LiCS

• Precautions on Using the LM Guide

• Precautions on Using Options for the LM Guide
  
  • QZ Lubricator
  • Laminated Contact Scraper LaCS, Side Scraper
  • Light Sliding Resistance Contact Seal LiCS

• Dimensions of Each Model with an Option Attached
  
  • The LM Block Dimension (Dimension L) with LaCS and Seals Attached
  • LM Block Dimension (Dimension L) with LiCS Attached Bellows

Customers can order from us an assortment of Yoke Type Track Roller (NUTR) at affordable rates. Our Yoke Type Track Roller is noted for its robust construction, great dimensional stability and long service life.

Features

• Outside surface profile of the outer ring

• Yoke type track rollers without inner ring
  
  • With cage, axial guidance of outer ring
  • Sealing
  • Lubrication

• Yoke type track rollers with inner ring
  
  • With cage, with full complement needle roller or cylindrical roller set
  • Axial guidance of outer ring
  • Anti-corrosion protection
  • Sealing
  • Lubrication

• Operating temperature
• Suffixes

Details :

• Yoke type track rollers are single or double row units mounted on shafts or studs. They comprise thick-walled outer rings with a profiled outside surface and needle roller and cage assemblies or full complement needle roller or cylindrical roller sets.
• Yoke type track rollers can support high radial loads as well as axial loads arising from slight misalignment and skewed running; they are suitable for applications such as cam gears, bed ways and conveying equipment.
• The bearings are available with and without an inner ring and in both sealed and open versions.
• Series PWTR is supplied as an X-life design. Due to a modified material and the optimised raceway geometry of the outer rings, the basic rating life has been increased by up to 30%.
• The static and dynamic load carrying capacity has also been increased. At the same time, the stress placed on the mating track has been reduced as a result of the optimised lateral surface profile and its improved surface quality.
• Due to these measures, highly robust bearing arrangements with an extended operating life can be achieved.

Specifications :

• Outside surface profile of the outer ring
  
  • Yoke type track rollers with a crowned outside surface are predominantly used in practice since they are often inclined in relation to the mating track and edge stresses must be avoided.
  • The radius of curvature of the outside surface is R = 500 mm. In the case of NNTR.-2ZL, the radius is indicated in the dimension table.
  • The series NATR.-PP, NATV.-PP, NUTR and PWTR.-2RS have an outside surface with the optimised INA profile.
  • In yoke type track rollers with this curvature profile (Figure to Figure ):
  • The Hertzian pressure is lower
  • Edge loading under tilting is lower
  • Wear of the mating track is reduced
  • The operating life of the mating track is extended.

• Yoke type track rollers without inner ring
  
  • Yoke type track rollers RSTO and RNA22.-2RSR do not have an inner ring. They are particularly compact but require a hardened and ground raceway on the shaft or stud.
  • Series RSTO is not self-retaining. This means that the outer ring and the needle roller and cage assembly can be fitted independently of each other.

• With cage, axial guidance of outer ring : In RSTO and RNA22.-2RSR, the rolling elements are guided by a cage. These designs do not have axial guidance of the outer ring. Axial guidance of the outer ring and needle roller and cage assembly must be provided in the adjacent component; see section link.

• Sealing : RSTO is not sealed, series RNA22.-2RSR has lip seals on both sides.

• Lubrication : The bearings are greased with a lithium complex soap grease to GA08.

• Yoke type track rollers with inner ring
  
  • These yoke type track rollers are used if the shaft or stud does not have a hardened and ground raceway.
  • STO is not self-retaining. This means that the outer ring, needle roller and cage assembly and inner ring can be fitted independently of each other.

• With cage, with full complement needle roller or cylindrical roller set
  
  • The series STO, NA22.-2RSR, NATR and NATR.-PP have a cage. The series NATV and NATV.-PP have a full complement needle roller set, while yoke type track rollers NUTR, PWTR.-2RS and NNTR.-2ZL have a full complement cylindrical roller set.
  • Bearings without a cage have the largest possible number of rolling elements and therefore have particularly high load carrying capacity. Due to the kinematic conditions, however, the speeds achievable with these bearings are somewhat lower than those achievable with the cage-guided yoke type track rollers.

• Axial guidance of outer ring
  
  • STO and NA22.-2RSR do not have axial guidance of the outer ring. This must be provided in the adjacent construction; see section link.
  • In NATR and NATV, axial guidance is provided by contact washers and axial plain washers. In NUTR, the outer ring is guided by the rolling elements, in PWTR.-2RS and NNTR.-2ZL it is guided by the central rib and the rolling elements.
  • Anti-corrosion protection : Yoke type track rollers PWTR.-2RS-RR are protected against corrosion by the special coating Corrotect. For a description of the coating, see link.

• Three-stage seal
  
  • In the three-stage concept, there is a gap seal between the plastic axial plain washer and the outer ring and a labyrinth seal between the formed seal lip and the undercut in the outer ring.
  • The disc spring shape of the axial plain washers gives a preloaded contact seal as the third stage. It also provides axial sliding contact between the outer ring and contact washers, thus reducing wear and grease consumption.

• Lubrication : The bearings are greased using a lithium complex soap grease to GA08 and can be lubricated via the inner ring. Relubrication can be carried out using Arcanol LOAD150.

• Operating temperature
  
  • Yoke type track rollers can be used at temperatures from 30 C to +140 C. In sealed bearings (suffix 2RS and 2RSR) and bearings with a plastic cage (suffix TV), the temperature range is restricted to between 30 ^oC and +120 ^oC.
  • Note the information on the operating temperature range in Technical Principles, Lubrication.
  • Yoke type track rollers NATR.-PP and NATV.-PP are suitable for operating temperatures from 30 ^oC to +100 ^oC, restricted by the grease and the seal material.

We are offering cam follower. This is the basic form of cam follower. Line up of size variations range from stud diameters of minimum 3 mm to maximum 30 mm, and they can be used for a very broad range of applications.

We are offering shaft coupling. Roller chain couplingnylon chain couplingjaw-flex couplingemer-flex couplingneo-flex couplingbellows coupling

We are engaged in exporting and supplying of Roller Followers. Our Roller Followers are designed for outer ring rotation, where needle rollers are incorporated in a thick walled outer ring. The outer ring of a Roller Follower runs directly on track surface and helps in reducing the edge load cause due to mounting errors.

Types of Roller Followers

• Separable Roller Followers
• Non-Separable Roller Followers
• Heavy Duty Type Roller Followers

We offer needle roller cages for general usage. product featuresneedle roller cages for general usage are bearings which display excellent rotational performance. Needle rollers with extremely small dimensional variations in diameter are incorporated and retained in their specially shaped cages with high rigidity and accuracy, which precisely guide the needle rollers. When combined with shafts and housing bores that are heat treated and accurately ground as raceway surfaces, needle roller cages for general usage are particularly useful in small spaces. In addition, since they are lightweight and have high rigidity as well as a large lubricant holding capacity, they can withstand severe operating conditions such as high speed rotation and shock load, and they are used in a wide range of applications.

We export and supply only high quality Needle Roller Cages. Our Needle Roller Cages display excellent rotational performance and needless of its dimensional variation in diameter, they provide high accuracy and precision in terms of quality. Used particularly is small spaces, our range of Needle Roller Cages are lightweight and extremely rigid. Even at higher speeds they can absorb a lot of shock load.

Iko c-lube unit for cam follower is a lubricating part attached to the cam follower. Since lubricating oil which is indispensable to the outside diameter surface of the cam follower outer ring and track surface is supplied, periodical oil supplying is not required. It realizes a long period maintenance free operation of the track surface. line-upit can be easily attached to the equipment which is currently used!

• c-lube unit for cam follower cl can be easily attached by tightening it together with the cam follower.
• c-lube unit for cam follower cl can be used with conventional equipment structure as it is by merely wiping off the foreign matter on the opposing track surface lightly with a rag.
• since the capillary lubricating body is impregnated with high quality lubrication oil euqivalent to jis k2213, even if general machine oil exists near the place of installation, it can be used as it is.
• .

Customers can avail superior quality Yoke Type Track Roller (NATR) from us. Our Roller is widely preferred by customers because of its compact design, perfect finish, durability and hassle free performance.

Features

• Outside surface profile of the outer ring

• Yoke type track rollers without inner ring
  
  • With cage, axial guidance of outer ring
  • Sealing
  • Lubrication

• Yoke type track rollers with inner ring
  
  • With cage, with full complement needle roller or cylindrical roller set
  • Axial guidance of outer ring
  • Anti-corrosion protection
  • Sealing
  • Lubrication

• Operating temperature
• Suffixes

Details :

• Yoke type track rollers are single or double row units mounted on shafts or studs. They comprise thick-walled outer rings with a profiled outside surface and needle roller and cage assemblies or full complement needle roller or cylindrical roller sets.
• Yoke type track rollers can support high radial loads as well as axial loads arising from slight misalignment and skewed running; they are suitable for applications such as cam gears, bed ways and conveying equipment.
• The bearings are available with and without an inner ring and in both sealed and open versions.
• Series PWTR is supplied as an X-life design. Due to a modified material and the optimised raceway geometry of the outer rings, the basic rating life has been increased by up to 30%.
• The static and dynamic load carrying capacity has also been increased. At the same time, the stress placed on the mating track has been reduced as a result of the optimised lateral surface profile and its improved surface quality.
• Due to these measures, highly robust bearing arrangements with an extended operating life can be achieved.

Outside surface profile of the outer ring

• Yoke type track rollers with a crowned outside surface are predominantly used in practice since they are often inclined in relation to the mating track and edge stresses must be avoided.
• The radius of curvature of the outside surface is R = 500 mm. In the case of NNTR.-2ZL, the radius is indicated in the dimension table.
• The series NATR.-PP, NATV.-PP, NUTR and PWTR.-2RS have an outside surface with the optimised INA profile.

• In yoke type track rollers with this curvature profile (Figure to Figure ) :
  
  • The Hertzian pressure is lower
  • Edge loading under tilting is lower
  • Wear of the mating track is reduced
  • The operating life of the mating track is extended.

Yoke type track rollers without inner ring

• Yoke type track rollers RSTO and RNA22.-2RSR do not have an inner ring. They are particularly compact but require a hardened and ground raceway on the shaft or stud.
• Series RSTO is not self-retaining. This means that the outer ring and the needle roller and cage assembly can be fitted independently of each other.

With cage, axial guidance of outer ring : In RSTO and RNA22.-2RSR, the rolling elements are guided by a cage. These designs do not have axial guidance of the outer ring. Axial guidance of the outer ring and needle roller and cage assembly must be provided in the adjacent component; see section link.

Sealing : RSTO is not sealed, series RNA22.-2RSR has lip seals on both sides.

Lubrication : The bearings are greased with a lithium complex soap grease to GA08.
Yoke type track rollers with inner ring

• These yoke type track rollers are used if the shaft or stud does not have a hardened and ground raceway.
• STO is not self-retaining. This means that the outer ring, needle roller and cage assembly and inner ring can be fitted independently of each other.

With cage, with full complement needle roller or cylindrical roller set

• The series STO, NA22.-2RSR, NATR and NATR.-PP have a cage. The series NATV and NATV.-PP have a full complement needle roller set, while yoke type track rollers NUTR, PWTR.-2RS and NNTR.-2ZL have a full complement cylindrical roller set.
• Bearings without a cage have the largest possible number of rolling elements and therefore have particularly high load carrying capacity. Due to the kinematic conditions, however, the speeds achievable with these bearings are somewhat lower than those achievable with the cage-guided yoke type track rollers.

Axial guidance of outer ring

• STO and NA22.-2RSR do not have axial guidance of the outer ring. This must be provided in the adjacent construction; see section link.
• In NATR and NATV, axial guidance is provided by contact washers and axial plain washers. In NUTR, the outer ring is guided by the rolling elements, in PWTR.-2RS and NNTR.-2ZL it is guided by the central rib and the rolling elements.

Anti-corrosion protection : Yoke type track rollers PWTR.-2RS-RR are protected against corrosion by the special coating Corrotect. For a description of the coating, see link.

Three-stage seal

• In the three-stage concept, there is a gap seal between the plastic axial plain washer and the outer ring and a labyrinth seal between the formed seal lip and the undercut in the outer ring.
• The disc spring shape of the axial plain washers gives a preloaded contact seal as the third stage. It also provides axial sliding contact between the outer ring and contact washers, thus reducing wear and grease consumption.

Lubrication

• The bearings are greased using a lithium complex soap grease to GA08 and can be lubricated via the inner ring. Relubrication can be carried out using Arcanol LOAD150.
• Operating temperature
• Yoke type track rollers can be used at temperatures from 30 ^oC to +140 ^oC. In sealed bearings (suffix 2RS and 2RSR) and bearings with a plastic cage (suffix TV), the temperature range is restricted to between 30 ^oC and +120 ^oC.
• Note the information on the operating temperature range in Technical Principles, Lubrication.

Suffixes : Yoke type track rollers NATR.-PP and NATV.-PP are suitable for operating temperatures from 30 ^oC to +100 ^oC, restricted by the grease and the seal material.

We are offering caged ball lm guide. The use of a ball cage eliminates friction between the balls, and achieves low noise, acceptable running sound, long term maintenance free operation, and high speed.

Owing to our team of diligent professionals, we are engaged in supplying stud track roller. Appreciated for their ready to fit quality, dimensional accuracy, excellent tilting rigidity and high radial and axial load carrying capacity, offered rollers are always on high demand. These rollers are widely used in rotary tables, milling head, face plates and in various measuring and testing equipment. Offered rollers are manufactured as per the international norms and standards at our vendors' end to maintain their wider application area. Patrons can avail qualitative stud track roller from us at market leading prices. stud track roller cage guided needle rollers, axial guidance by rib and washers kr.pp sealed with lip seals for operating temperatures from -30o c to +100o c limited by the grease and sealing ring material kr has gap seals on both sidesoutside diameter from 16 mm to 90 mm axialradial bearings and axial angular contact ball bearings are ready-to-fit bearing units withhigh axial and radial load carrying capacityhigh tilting rigidity andhigh accuracy both series have the same mounting dimensions and are use for bearing arrangements in rotary tables, face plates and miling head as well as measuring and testing equipment.

Precision linear slidesprecision linear slidesprecision linear slide is a light weight and compact linear motion rolling guide, comprising a u shaped table (or slide unit race) and bed (or track rail) made from stainless steel sheet by precision forming. The raceway grooves are accurately ground on the table and bed. Precision linear slide features high proformance and durability , making this series suitable for measuring equipment, disk drives ic manufacturing and inspection devices etc. Series: bsp (linear motion) , bspg (built in rack and pinion) , bsr (endless linear motion)

Precision positioning table is a positioning table, featuring high reliability, high accuracy, and high rigidity. The linear ways are assembled on a slide table and bed made of cast iron which are designed to have a high rigidity and superior vibration damping characteristics, and a precision ball screw is assembled in the drive accuracy and positioning accuracy, as well as high load capacity. four sizes with table widths ranging from 120mm to super large size 420 mm are available. Two axis tables which combine these single axis tables are also available as standard specifications. This product is most suitable for use as a high accuracy positioning mechanism with a large applied load and a relatively long stroke. series: tslh (single axis) and ctlh ( x, y axis)

Precision alignment table at is a rotary positioning mechanism for precision angle correction, which consists of a high rigidity steel table and bed assembled with crossed roller bearing as a table support bearing. Precision alignment table at converts linear motion produced by ball screw drive into circular motion of an appointed operating angle range, and performs positioning in the direction of rotation. Linear way l is assembled as a linear motion rolling guide in the ball screw drive mechanism and serves to achieve high accuracy positioning in combination with the precision ball screw.

We offer needle rollerneedle rollers are the main element of a bearing without which no needle bearings is complete or where there is heavy load needle rollers are needed. As they are principaly working on the line load factor. Application of needle rollers varies but its most commonly used in automotive transmission universal joints, water pump bearing, bottom roller bearing for textiles, and as pin and shaft for various application, in printing machines, in rolling mills, slides. constant velocity jointsroller clutchesplanetary gear setsthrust bearingroller clutchesu-jointswater pump bearing needle rollers are available in range of diameter from 1.00 mm to 12.00 mm and length from 3.8 mm to 50.00 mm. Standard material for needle rollers is sae52100 or equivalent. Hardness standardhrc 60 to 64hardness as low as hrc 45 available on request needle rollers are available with different ends configuration flat, round and ground ends. Needle rollers spherical ends- brdia in m.m length in m.m weight per1, 000 nos.Gm.1 6.6 38.51.5 6.8 871.5 9.3 1251.5 13.6 1861.811 13.46 2742 9.8 2402 11.8 2802 13.8 3262 15.8 3762 30 7202.015 10.3 2572.381 10.57 3232.387 12.55 3842.387 16.85 5442.387 19.8 6732.5 7.8 2852.5 9.8 3602.5 11.8 4312.5 13.8 5112.5 15.8 5812.5 17.8 6612.5 19.8 7322.5 23.8 8822.778 11.17 5093 9.8 5113 15.8 8413 19.8 10523 21.8 11523 23.8 12623 29.8 16033.0025 25.1 13863.0025 28.1 14503.16 11.17 6193.175 19.05 11273.175 21.40 12873.2 19.3 11553.5 23.8 17203.5 29.8 21553.968 19.05 17703.97 28.1 25154 25.4 24854.755 30.15 41454.757 25.4 35164.757 34.925 46505.542 19.05 32336 29.8 63317.5 12.5 4214 needle rollers flat ends. Bpdia in m.m length in m.m weight per1, 000 nos.Gm.0.9 9 0421.5 6.4 0821.5 7.4 0951.5 9.3 1191.5 10.1 1301.5 14.1 1801.588 10.06 1532 4.8 1172 5.8 1422 7.8 1902 9.8 2392 11.8 2882 13.8 3372 15 3852.5 7.8 2952.5 9.8 3782.5 11.8 4552.5 15.8 6092.5 18.8 7232.95 5.95 3203 10.8 6003 11.7 6463 12.8 7073.15 9.4 5753.175 16.75 10423.175 31.75 20043.5 5 3783.5 12.8 10054 5 5124 6 6154 12 12304 12.8 13124 15.8 16204 19.8 20304 25.4 26054 39.7 40704.95 8.5 12785 25 37405 18.8 7 16 9 21 needle rollers ground ends. Bpmdia in m.m length in m.m weight per1, 000 nos.Gm.4 8 7907 10 29807 13 38737.513 13 44657.513 16 54907.513 21 72069 9 4430

Buyers can get in touch with us for obtaining our premium range of Linear Guideway System (BRH B-BL) at modest rates. We are capable of handling small or bulk orders of the Guideway System as per the requirement of the buyers.

we are offering lm guide. lm guide is our main product, which incorporates a component with a linear rolling motion into practical use for the first time in the world. it significantly contributes to the development of high-precision, high-rigidity, energy-saving, high-speed machines with long service lives.

We offer high temperature kluber industrial grease.With the aid of our in-depth domain proficiency, we are engaged in supplying to our valuable customers a wide range of kluber industrial grease. This offered high temperature grease made utilizing quality approved raw material advanced technology at our vendors' end. So as to make sure its defect free nature, these products are sternly checked on various quality factors. Additionally, we supply this range to our customers at immensely nominal price. Features:precise dimensioncorrosion resistantcomparatively light in weight.

We are engaged in supplying and exporting of Graphite Filled Bronze Bushes based in Delhi, India. Majorly used in steel rollers and mineral machines, the offered Bronze Bushes are appreciated for their precise design, smooth surface and requirement of low maintenance. Customers can obtain Graphite Filled Bronze Bushes from us at highly reasonable rates.

Features :

• Dimensional accuracy
• Sturdy construction
• Rust resistance

Specifications :

• Material - Germany DIN CuZn 25A15
• Japan JIS HBcC4
• England Standard HIB 2
• Temperature Limit - -100^oc - 300^oc
• Max Speed limit - 10 m/s
• Max Load Capacity - 150 N/mm²
• Alloy Hardness - HB 250
• Friction Coefficient -1. Oil Lubrication - 0.03. Dry friction - 0.16
• Max PV Value Limit - 200 N/mm2 .m/min
• Density - -8.0 g/cm2
• Tensile Strength -smaller than 780
• Elongation - Smaller than 4 %

We have carved a niche in the market as the Supplier and Exporter of Self Lubricating Bronze Bushes from Delhi, India. The range of Bronze Bushes we offer is procured from known vendors who conform to the latest industrial methods for its fabrication. We are capable of delivering any order of Self Lubricating Bronze Bushes within postulated time.

Features -

• Low friction
• Accurate dimension
• Anti corrosive

Specifications :

• Maximum Load Capacity - Static Load - 250 N/mm²
• Dynamic Load - 140N/mm²
• Maximum Sliding Speed - Dry Friction -2.5m/s
• Oil Lubrication - 5.0m/s
• Temperature Limit - -195^oC - 300^oC
• Friction Coefficient - Dry Friction -0.08 -0.20
• Oil Lubrication -0.20 -0.07
• Thermal Conductivity - 70 W/m.k
• Coefficient of thermal expansion - 17 x 10-6/k

We specialize in supplying and exporting Stainless Steel Bushes from Delhi, India. We manage a huge stock of Stainless Steel Bushes in our spacious warehouse to address bulk and urgent requirement of customers. Procured from dependable vendors, our Stainless Steel Bushes can be availed by buyers at most economical rates.

Features :

• Impeccable finish
• Dimensional accuracy
• Sturdiness

Specifications

• Speed Limit 1.Static Load - 250 N/mm²
• Dynamic Load - 140 N/mm²
• Load capacity -140 N/mm²
• Dry Friction - 2.0 m/s
• Oil Lubrication - 5.0m/s
• Temperature Limit - -195^oc - 300^oc
• PV limit (dry) - 4.3 N/mm2 m/s
• PV limit (oil) - 50 N /mm2 m/s
• Friction Coefficient - Dry Friction - 0.8- 0.20
• Oil Lubrication - 0.02 -0.07
• Thermal Conductivity - 42 W/m.k
• Coefficient of thermal expansion - 15 x 10_6 /k

We offer oil seals.Bearing seals enhance performance and life by minimizing oil and water ingress and resulting damage. Iko seals currently are available for wide range of automotive applications, including. Sizes available bore: 6 mm to 72 mm , double-lip & single-lip. axlescamshaftscrankshaftsinput shaftspinionstiming coverswheels

We are offering ball screw. ball screw