Logsun Systems

Sinhagad Road, Pune, Maharashtra

DuinoMite is a Maximite Compatible Basic computer, originally designed by Geoff Graham, with additional features and Arduino like layout. DuinoMite allow you to program in BASIC language and have VGA and Keyboard interface, so you can develop and write your code in Basic without need of any computer. You can store your code on the SD-CARD and to execute it on power up thorugh autoexec.bas main code.

FEATURES:

• PIC32MX795 microcontroller
• USB OTG allowing PIC to work as USB device and USB host and allowing Android ADK applications, interface to USB keyboards, Cameras, Printers, etc peripherials
• 10 pin IO connector for connecting VGA, Audio, Composite Video, PS-2 Keyboard
• UEXT connectorfor connecting different Olimex modules
• 26 pin Maximite like connector
• micro SD card connector
• 8Mhz crystal
• 32768Hz crystal for RTC implementation
• Low power design allows PIC to work in deep sleep, and peripherials to be shut down
• Automatic power source change, i.e. you can power this board by External power supply 9-30VDC, USB, or battery, the power switching is automatic.
• Arduino like format i.e. can work with Arduino shields
• Li-po charger for Lithium Polimer Battery
• Industrial temperature range design -25C+85C
• UEXT connector i.e. can work with all our modules

Do not use the "programmer-to-go" button when there is no image on the OLIMEX PIC-KIT3 or MICROCHIP PIC-KIT3 because that might put your microcontroller in an irrecoverable state. We have tested the mentioned scenario and we can confirm that it destroys PIC32 chips (using both our and the original Microchip PICKIT3). We don't take responsibility if you break your chip that way. For more info check the following:www.microchip.com/forums/m635420.aspx.

DEVELOPMENT BOARD FOR 20 PIN AVR MICROCONTROLLER WITH STKXXX COMPATIBLE 10 PIN ICSP

FEATURES

• ICSP 5x2 pin connector for in-circuit programming with AVR-PG1 or AVR-PG2
• DIL20 microcontroller socket
• status LED connected to PB4
• reset IC ZM33064
• Quartz crystal oscillator circuit 10MHz
• Voltage regulator +5V, 7805 and filtering capacitors
• Power plug-in jack
• RS232 DB9 female connector , simple level shifter with transistors and diodes
• 4 opto-coupler isolated inputs with screw terminals
• input status LEDs
• 4 relay outputs with 5A/250VAC contacts with screw terminals
• output status LEDs
• four mounting holes 3.3 mm (0.13")
• FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print
• dimensions 80x100 mm (3.9 x 3.15")

7-INCH LCD DISPLAY WITH RESISTIVE TOUCH SCREEN PANEL SUITABLE FOR OLIMEX OLINUXINO BOARDS

A 7" LCD display with a resistive touch screen component, compatible with Olimex A10, A13, A10s, A20 Allwinner development boards with either 0.1" or 0.05" LCD connector. Suitable for Linux and Android video output.

• Innolux 7" (480x800) AT070TN9X display with LED backlight
• Resistive touch screen panel
• 16 700 000 colors
• Anti-glare surface
• Two interface connectors: both 40 pin 0.1" pitch and 40 pin 0.05" pitch
• FR-4, 1.5 mm, red soldermask, component print
• Dimensions of the PCB:(165 x 100)mm (6.5 x 3.95)"
• Note that the cable to connect to your board is sold separately