Lodha International LLP

Vatva, Ahmedabad, Gujarat

horizontal cylindrical autoclaves, manufactured by lodha are best suitable for healthcare and pharmaceutical industry, where large volume of sterilization is required. designed ergonomically, our range of high pressure horizontal autoclave sterilizers is ideal for academic facilities, biotech industries, pharmaceutical industries, hospitals, research centres and food and beverage industries. these units efficiently meet stringent sterilization requirements and well suited for sterilizing hospital dressings and surgical instruments, rubber and plastic goods, glassware and utensils etc.

salient features:

vacuum system: mechanical removal of air initially from within the chamber with the use of a vacuum system ensures that no air-pockets hinder the steam penetration and hence the sterilization process.steam sterilizer for sterilization of varied hospital equipment like gloves, linen, gauze, cotton, instruments, glassware etc. using standard 121c & 134c cycles which are pre-programmed in the memory of the plc / microprocessorelectrical steam-generator provided for all models up to a chamber volume of 1000 litres.temperature uniformly and accurately maintained throughout the chamber to within 0.5c of the set sterilization temperature.air filter: 0.01-micron clean air-filter for stabilization of the internal air-pressure from vacuum condition.door safety: door is automatically locked when chamber is under pressure. for double door models, both doors will not open simultaneously to ensure sterile chain integrity.safety: jacket and chamber safety valves provided.chamber fabrication: chamber fabricated out of ss 304 / s316 grade steel. heavy duty steel jacket encircles and strengthens the chamber.all machines are available with conventional hinged doors, or modern automatic sliding door optionsdouble-wall design ensures uniform and rapid pre-heating of the chamberflush-mounted panel provided on the sterile side on request, ensuring separation from the un-monitored environment of the operating side.

steam sterilizer sterility assurance through automation:
during sterilization a microprocessor / plc controls temperature, pressure, steam injection, sterilization time, drying and all other critical time-based parameters.important sterilization parameters like phase status, current values & set values, continuously displayed at all times on controller screen & on remote computer via scada software.continuous display of temperature and pressure on-line allows user to be aware of cycle status at all times.error code and alarm is generated and cycle stops automatically in case any error occurs. computer screen displays error, possible cause and remedy.the advanced scada software provided stores detailed records of process- data for every cycle.reports are available in data, summary and graph formats for every batch of goods sterilized.

Rapid Mixer Granulatoris designed for mixing the ingredients and wet granulation for tablet and capsule manufacturing process. This efficient machine achieves it by consistent mixing, uniformity of granule size and reducing process time. Moreover, rapid mixer granule is complaint to cGMP norms and maintains high standards of hygiene. The Lab Rapid Mixer Granulator is used in laboratories for research and development due to which it is also known as R&D Rapid Mixer Granulator. It is also known by the names Mini Rapid Mixer Granulator, Small Rapid Mixer Granulator and Compact Rapid Mixer Granulator due to its small and compact size.

lodha brings you comprehensive range of high-speed pvc-alu blister packing machine. our automatic blister packaging machine utilized for packaging of the tablets, capsules in a blister pack. our world class quality, reliability, performance and cost-effective range makes our machines ideal choice for pharmaceutical industry of any size.

packaging materials:

base material: pvc, pvc/pvdc, pvc/al/opa, aclar.

lidding material: aluminium with heat sealable lacquer or pvdc coating, glassine paper.

process operation:

stainless steel cladding conforming to cgmp standards.

recipe program through man- machine interface

li-pa240 is a machine model with continuous operations of forming station, feeding station, sealing station and printing station. whereas punching station is of intermittent nature. product capacity of the machine depends on the product characteristics, pack layout and on type of feeding device.

pvc film is generally used as base film and aluminium foil with heat sealable vmch coating as lidding film.

batch code printer, inspection camera and inline perforator are the accessories, which can be mounted on the machine.

the blister cavities are formed on the pvc/pvdc film web by vacuum processes.

this blister formed web moves over the web guide track and at this station the products are fed into the individual cavities.

the formed web along with the tablet or capsules moves towards a sealing station, where it is fused to the aluminium foil, which is drawn from an aluminium reel feed station.

the punching tool punches out the specified pack, which is transferred to the out-feed conveyor.

products to be packed on the machine are specifically pharmaceutical products such as tablets and capsules. different type of products can be fed into the blister formed cavities on the formed web over the web guide track at the feeding zone.

separate embossing or perforation station.

volumetric liquid filling machine is compact, versatile and enclosed in elegantly matt finish body. this machine provides maximum output up to 200 bottles per min. this machine model is used in pharmaceutical, food, dairy, chemical, cosmetic and beverages industry.the speed of bottle filling machines depends on nature of liquids, container diameter, container height, container neck size and filling volume. machine construction in fully stainless-steel finish including machine frame structure as per cgmp guidelines. machine with optional turn tables at in-feed and out-feed with individual drives to match the speed of incoming and outgoing bottles for smoother operation. all contact parts of machine model are stainless steel 316 only.

special features:

flow meter for high fill accuracy and repeatability

built in plc with color touch screen operation

tri-clover joint for easy maintenance

no bottle - no fill system, no bottle - machine stop system

all contact parts made of ss 316 material with easy removal system

machine construction in ss 304 material

diving nozzle for foam free filling

very high fill accuracy of 1 to 1.5 ml for any fill volume up to 250 ml and 2 ml above 250 ml pack size.

machine also available with option of high fill accuracy of 0.5 to 1 ml.

suitable for syrup and suspension having higher viscosity.

automatic infeed and exit of bottles

minimum change over time

unique free spinning bottle separator- no pneumatic operation

built-in a.c. variable freq. drive system.

automatic rotary & linear tube filling machine for the cosmetic, food, chemical and pharmaceutical industries as per our standard models or according to customers specific requirements. our machine designed to fill single tube large and small, side by side, dual product. our machine sealing types include: aluminium crimping and folding, hot air sealing for plastic and laminates. our machines can be customized to fit your production needs.

automatic tube filling machine is having applications for metal, plastic, polyfoil and laminate tubes with cassette infeed system. this machine is designed and constructed according to the highest technology standards to guarantee the maximum productivity and quality. equipment complies according to cgmp standards and therefore suitable for sterile rooms and laminar flows. easy changeover without tools in very less time. a mechanical lifting mechanism or run by a servo motor (upon request) controls the lifting and descending of the tube according to the fill product characteristics. excellent access for cleaning and maintenance.

salient features:

the speed of the machine is 50 to 120 tubes per minute. it will vary depending upon the size and type of product the tube.

it can fill up from 3 ml to 200ml of cream/ointment.

it can seal/close lami tube up to 40 mm diameter and aluminium tubes up to 28 mm diameter.

it will have oval race track with aluminium tube holder.

the indexing system will be of ferguson type oil immersed.

the body is fully enclosed from all sides.

the machine will be cladded with pre-buffed ss sheet.

over load clutch protection of conveyor.

provision for bar code reading. if required.

all stationary parts above table top will be in ss 304.

a variable frequency drive for changing the speed of the machine will also be provided along with the machine.

the machine will have plc of allen bradley make and touch screen hmi.

all cams will be hardened and generally all shaft will be supported on bearing.

the pneumatics will of festo, electricals of siemens and sensors will of reputed brand from europe.

all the door will have safety switch and only 24v dc power will come out of the machine. even the cassette motor will also operate at 24v dc power.

utility required:

input power: power in put, 4 - 5 kw. at site: 3 phase/ 415v. 15%, / 50hz. 5%, and neutral. (as applicable)

compress air: client to provide instrument quality moisture free air supply for smooth filling machine function the continuous air to be supplied at site: 6 kgs. / sq. cm. pressure at 11 cfm max.

cooling water: water circulation at site: 8 lpm at 12o c.

semi automatic capsule filling machine, lscf - 35 & lscf - 45 is configured according to precision manufacturing requirements of pharmaceutical industry. semi automatic capsule filling machine mainly consider in medium scale pharmaceuticals, herbals and nutraceutical companies where the higher production output is required with medium lost. the machine provides high degree of automation with higher levels of weight accuracy in filling hard gelatin capsules. semi automatic capsule filling machine suitable to fill capsules of all sizes with powder, granules or pelletssemi automatic capsule filling machineis constructed by quality stainless steel covering according to gmp standards.

salient features

• higher production output for r&d scale to production scale requirements.
• production output up to 47, 000 capsules per hour.
• this model capable to fill powder, granule and pellets in hard gelatin capsule.
• minimum power consumption
• capsule polishing is online, so there is no need to store or hold capsules.
• plc controlled digital display with hmi interface.
• four speed auger is provided to fill various type of powders & pellets.
• modified design ss hopper for smooth operation
• when loading ring is completely filled with capsules it declutches automatically.
• dosage filling accuracy
• machine manufactured with high quality fabrication work by experienced technicians.

LI-AFS Ampoule filling and Sealing Machine is used for filling and sealing of glass ampoules. Machine is widely uses in pharmaceutical, biotech, cosmetic, veterinary & chemical industry. We design ampoule filling and sealing machine as per our standard model as well as custom made models according to customers specific requirements. machine built on principal of slant travel of ampoules while filling and sealing to take care wide variation of ampoule neck dimensions, thicknesses and ovality of available ampoules. ampoule filling and sealing machine is built on stainless steel square pipes frame & totally encompassed with stainless steel coverings in pleasing matt finish design. Large opening area configured on bottom side of the machine for absolute cleaning and maintenance of the machine. the pendant type electrical control panel is lifted from machine for ease of operation and safetysalient features: compact gmp model production output ranging from 30 ampoules/min. To 150 ampoules/min. all contact parts made from aisi ss 316l & other non-contact parts made from aisi ss 304. machine is suitable to fill 1ml to 20ml ampoules and minimum change over parts from 1ml to 20ml ampoule size no ampoule no filling system ampoule neck centering during gas flushing and filling operations possibility of nitrogen gas flushing before, during and after filling full accessibility allows easy maintenance machine equipped with pre-warming station minimum change over time, little maintenance & easy cleaning process operation: the sterilized ampoule tray directly loaded in to slant hopper of the unit. The synchronized star wheel delivers ampoules one by one on moving eccentric ampoule rack in single/two/four/six.during the stoppage of rack sequentially pre-gassing, filling, post gassing, pre heating and final sealing is achieved. Duly filled sealed ampoules then collected on collection tray automatically without hand touch.the machine performs the following operations ampoule feeding by in-feed hopper, star wheel and ampoules transfer into transport rack. two ampoules advanced per machine stroke. centering of ampoules necks during pre-heating, post heating, gas flushing and liquid filling. rotation of ampoules neck in the pre- heating and heating station. elimination of burdened-off ampoule tips by clippers and ejection into a separate container.

Automatic capsule filling machineis largely used in pharmaceutical industry worldwide for production of hard gelatin capsules in formulation with powder, pellets, and granules separately or in different types combination of powder & pallets.Lodha International LLPis famously known as a manufacturer, supplier and exporter ofAutomatic capsule filling machineM in India. We have been serving local and international clientele since our inception and consistent quality and after sales support makes us the best choice among our valuable buyers. We have strong export presence in USA, Europe, Middle East, Africa, Latin America and Asia as a exporter from India and served major pharmaceutical brand worldwide.Lodha International LLPnot only saleAutomatic capsule filerbut also ensures smooth after sales support and service whenever or wherever required.

Specification of Automatic Capsule Filling Machine

Lodha International LLPs allAutomatic Capsule Filling Machineprocesses the products for optimal productivity up to 90, 000 capsules per hour featuring low maintenance operation, minimal downtime and overall dependable production. Further in the era we also manufacture High Speed Capsule Filling Machine production output ranges up to 1, 45, 000 capsules per hour for our pharmaceutical industries customers. The powder dosing formulated with the tamping pin technology for an enhanced accuracy. The machine is developed for high accuracies and to fill the entire range of hard gelatin capsule sizes from 00 to 4.

The machine is completely controlled by means of a PLC with touch enabled human interface with a user friendly operable front end.

Special Features

• Confirms to cGMP design standards with emphasis in powder dust handling.
• Enclosed dosing system with dust suction reduces cleaning frequency.
• Vacuum cleaning station for segment cleanup in each cycle.
• Efficient capsule separation by means of vacuum.
• Touch Screen HMI, featuring user friendly controls: production counter, manual / automatic / parameter setup modes, alarms.
• Precision capsule segments and dosing disk minimizes adjustments following parts changeover.
• Stainless Steel 304 frames and transparent safety interlock guards.
• Accurate capsule separation without damaging capsule with wide range of different capsules.
• Automatic rejection system for Non separated/ improperly inserted capsule top Caps.
• Quick Fill weight adjustments and high precision dosing tools ensures optimum machine efficiency.

Semi-Automatic Single Disc Capsule Counting Machine is compact highly efficient and cost-effective machine model/ It can easily count and pack capsules & tablets of any size. The design of the Machine is ergonomic, easy to handle and maintain for operators. The trouble-free operations and accurate results of these semi-automatic machines help in maintaining GMP standards.

Salient Features:

Each disc is custom designed and manufactured to meet customers needs.The machine is provided with adjustable filler which can be elevated from 20 to 25 degrees, to facilitate entry of the products into the disc holes.The machine is fitted with superior quality delivery chutes which direct the product from the counting disc into the stainless-steel filler tubes of various sizes, to suit different containers, suitable to work on 3 phase ac, 1 HP motor, 1440 rpm with variable speed drive.The entire machine is mounted on MS body.Simple operation, only one operator required, and operating training can be done in 10 min.The machine is provided with one countable type disc.G.M.P. model: M.S. body of the machine cladded with SS sheet.

Technical Specification:

Contact Parts: Stainless Steel 316Power consumptions: 0.75 KW / 1 H.P.Air Consumption: 40 Litre/minute@ 6 bar pr.Power supply A.C. 3 Phase440 V, 50 Hz Motor-1440rpmPacking Case Dimension 1981 (L) X 1219 (W) 1016 (H) mmNet Weight: 290 Kg.Gross Weight: 425 Kg.

ampoule filling and sealing machine is used for filling and sealing of glass ampoules. Machine is widely uses in pharmaceutical, biotech, cosmetic, veterinary & chemical industry. We design ampoule filling and sealing machine as per our standard model as well as custom made models according to customers specific requirements.

machine built on principal of slant travel of ampoules while filling and sealing to take care wide variation of ampoule neck dimensions, thicknesses and ovality of available ampoules.

ampoule filling and sealing machine is built on stainless steel square pipes frame & totally encompassed with stainless steel coverings in pleasing matt finish design. Large opening area configured on bottom side of the machine for absolute cleaning and maintenance of the machine.

the pendant type electrical control panel is lifted from machine for ease of operation and safety

salient features:

compact gmp modelproduction output ranging from 30 ampoules/min. To 150 ampoules/min.all contact parts made from aisi ss 316l & other non-contact parts made from aisi ss 304.machine is suitable to fill 1ml to 20ml ampoules and minimum change over parts from 1ml to 20ml ampoule sizeno ampoule no filling systemampoule neck centering during gas flushing and filling operationspossibility of nitrogen gas flushing before, during and after fillingfull accessibility allows easy maintenancemachine equipped with pre-warming stationminimum change over time, little maintenance & easy cleaning

process operation:

the sterilized ampoule tray directly loaded in to slant hopper of the unit. The synchronized star wheel delivers ampoules one by one on moving eccentric ampoule rack in single/two/four/six.during the stoppage of rack sequentially pre-gassing, filling, post gassing, pre heating and final sealing is achieved. Duly filled sealed ampoules then collected on collection tray automatically without hand touch.the machine performs the following operationsampoule feeding by in-feed hopper, star wheel and ampoules transfer into transport rack.two ampoules advanced per machine stroke.centering of ampoules necks during pre-heating, post heating, gas flushing and liquid filling.rotation of ampoules neck in the pre- heating and heating station.elimination of burdened-off ampoule tips by clippers and ejection into a separate container.

automatic capsule fillerthat fills up to 1, 50, 000 capsules per hour with variety of powder formulation. this auto capsule filling machine model can accurately fill entire range of hard gelatine capsule sizes 00 to 4 with powder, pellets, and granules separately or in all type combination of powder & pallets with high accuracies. automatic capsule filler uses the tamping pin technology to form a slug which is inserted in hard gelatine capsule for an enhanced accuracy. our fully automatic range of capsule filling machines have been designed with our experience spanning close to two decades and the technology available with us on secure filling and closing of capsules.

the machine control is by means of a programmable logic controller with touch enabled siemens make human machine interface with a very user friendly operable front end. fully automatic capsule machine is offered in number of variants that differs on the production rate as per the requirement. the minimum production rate of the machine is 25, 000 capsules and it goes as high as 1, 50, 000 capsules. it requires a 3-phase power supply for smooth and trouble-free operation.

special features of fully automatic capsule filling machine:

• cgmp design with emphasis in powder dust handling: enclosed with main turn table avoid dust getting into mechanical parts of machine.
  
• enclosed dosing system with dust suction reduces cleaning frequency.
  
• vacuum cleaning station for segment clean-up in each cycle.
  
• efficient capsule separation by means of vacuum.
  
• touch screen hmi, featuring user friendly controls: production counter, manual / automatic / parameter setup modes, alarms.
  
• precision capsule segments and dosing disk minimizes adjustments following parts changeover.
  
• stainless steel 304 frames and transparent safety interlock guards.
  
• accurate capsule separation without damaging capsule with wide range of different capsules.
  
• automatic rejection system for non separated/ improperly inserted capsule top caps.
  
• quick fill weight adjustments and high precision dosing tools ensures optimum machine efficiency
  
• scada software on special request of client.

Automatic Capsule Powder Filling Machinethat fills up to 1, 50, 000 capsules per hour with variety of powder formulation. This auto capsule filling machine model can accurately fill entire range of hard gelatine capsule sizes 00 to 4 with powder, pellets, and granules separately or in all type combination of Powder & Pallets with high accuracies. Automatic Capsule Filler uses the tamping pin technology to form a slug which is inserted in hard gelatine capsule for an enhanced accuracy. Our fully automatic range of capsule filling machines have been designed with our experience spanning close to two decades and the technology available with us on secure filling and closing of capsules.

Special Features of Fully Automatic Capsule Filling Machine:

• cGMP design with emphasis in powder dust handling: Enclosed with main turn table avoid dust getting into mechanical parts of machine.
  
• Enclosed dosing system with dust suction reduces cleaning frequency.
  
• Vacuum cleaning station for segment clean-up in each cycle.
  
• Efficient capsule separation by means of vacuum.
  
• Touch Screen HMI, featuring user friendly controls: production counter, manual / automatic / parameter setup modes, alarms.
  
• Precision capsule segments and dosing disk minimizes adjustments following parts changeover.
  
• Stainless Steel 304 frames and transparent safety interlock guards.
  
• Accurate capsule separation without damaging capsule with wide range of different capsules.
  
• Automatic rejection system for Non separated/ improperly inserted capsule top caps.
  
• Quick Fill weight adjustments and high precision dosing tools ensures optimum machine efficiency
  
• SCADA software on special request of client.

Semi Automatic Capsule Filling Machine LSCF-35is designed for precision manufacturing requirements of modern pharmaceutical procedures. The semi-automatic capsule filling machine provides a high Degree of automation with higher levels of filling weight accuracy. Capsule Filling Machine is suitable to fill capsules of all sizes with powder, granules or pellets. This semi-automatic capsule filling machine is made as per GMP standard, has all Stainless-Steel covering and gives output of 25, 000 to 45, 000 capsules per hour depending on capsule size and operator proficiency.

alu - alu blister packing machine: design of the machine is ergonomic used for both the cold forming (alu/alu) and thermo forming (pvc/alu) blister packs. this machine is suitable for large production batches in pharmaceutical industry. we have used the best ideas from the past and developed with the future. the main movements are mechanical and pneumatic, all the control systems used in the equipment are the best in the electronic market.

salient features:

packing speed: 40 cycles/min for thermo-forming. 35 cycles/min for cold-forming.

feeding system: auto feeding system by plc logic with pneumatic combination.

servo drive indexing: servo web indexing by rigid plc logic.

operator interface: user friendly hmi touch screen (human machine interface).

pneumatic operations: festo make for fast response, oil free, minimum wear and tear, easy maintenance and universal availability of bought outs.

Automatic Vial Labelling Machine for high speed wrap-around application on ampoules. LI-ASL is one of the most users friendly. The Machine incorporates with modern Micro Processor Control Label Dispensing system with user friendly Sensing system for Label and Product. The machine is suitable for Labeling on Round Vials, and other round Objects. It is capable of Labeling up to 400 units per minute depending on products and label size. Specially designed electronic and mechanical system to apply transparent (No Look) Labels on Vials at very high speed using optional special label sensing system.

Truly one and only High-Speed Rotary Warp Around Labeling Machine available in India, with unique single point synchronized speed control system. The Inbuilt Automated Label Length detection systems eliminates any need for manually feeding and storing of Label Length data in memory and retrieving the same every time for change of Label Size & re-starting the machine. The System thus saves valuable time, avoiding machine-down time, and helps achieve higher production.

Machine with highest installation in India. Machine have added advantages like Special Feeding Device enabling feeding of Ampoules/Vials in Vertical Position directly from the trays and similarly collecting the labelled products also in Vertical Position in trays. Operator can also feed the Ampoules/Vials for Labeling On-line on Machine without any stoppage. The feeding system effectively eliminates clumsy, inconvenient, time consuming and prone to breaking of Ampoules etc. at the time of loading the products for labeling compare to other Slant Hopper Feeding system.

Machine also available with optional Turn Table for Feeding of Vials for online transfer of Ampoules from Capping/Inspection machine to labeling and online transfer of labeled vial to packing conveyor/inspection system, this system helps for continues labeling operation for vials.

This system belongs to the LODHA Pharma line, especially dedicated to labeling, coding, serialization and track and trace of pharmaceuticals; this line has been designed to ensure high standards of quality, safety, productivity and maintenance complying with the guidelines for good manufacturing practice of pharmaceutical markets.

Special Features:

No Label Data Input/retrievals require for any Label Size

Colour Touch Screen Operator panel

No Change Parts for Label size

Single Pot On-line Speed Variation control

Synchronized speed of Label Dispensing, Product Feeding and Pressing Device

Virtually Maintenance free machine

Easy to change label application height

User Friendly Label Placing Adjustments

Self-Protected against Voltage Fluctuations

Suitable for On-Line Inkjet and Contact Coding System

Suitable for Partial, Full Wrap Around and Overlap Labeling

Built in A.C. Variable Frequency Drive System.

Fully Stainless-Steel Finish Machine

Rotary Bottle Washing Machine Operates on the rotary principle with "GENEVA" mechanism and requires manual loading and unloading of bottles. LI-RBW model is suitable to wash various types of Bottles ranging from 15 ml to 1000 ml size with maximum speed of 100 bottles per minute. Machine construction is in Stainless Steel finish including frame structure. All parts used in contact with washing zone and Jets are made from stainless steel 316 Material. Intermittent handling of Bottles ensures the maximum time for washing. Machine also offers various customised options for washing sequence as per customers requirements. Washing process takes place with Four different Washing Zones for optimum washing. Machine also equipped with external washing of Bottles. We can also customise the machine to suits special type of bottle or size and also washing sequence. We have also another lower capacity Model LI-RBW 64 with speed of 60 bottles per minute for lower speed requirement and also require small area compare to LI-RBW 100.

Salient Features:

16 Jets for each washing zones

All contact parts made of SS-316 material

Machine construction is in SS-304 material

Suitable for 15 ml to 1000 ml Bottle Size*

Machine with Geneva-Cam Mechanism

Washing sequence can be made as per customers requirements.

Built-in 2 Pumps and 2 Tanks

Machine main drive with Safety Clutch System

Pharmaceutical Bottle Washing Machine Operates on the rotary principle with "GENEVA" mechanism and requires manual loading and unloading of bottles. LI-RBW model is suitable to wash various types of Bottles ranging from 15 ml to 1000 ml size with maximum speed of 100 bottles per minute. Machine construction is in Stainless Steel finish including frame structure. All parts used in contact with washing zone and Jets are made from stainless steel 316 Material. Intermittent handling of Bottles ensures the maximum time for washing. Machine also offers various customised options for washing sequence as per customers requirements. Washing process takes place with Four different Washing Zones for optimum washing. Machine also equipped with external washing of Bottles. We can also customise the machine to suits special type of bottle or size and also washing sequence. We have also another lower capacity Model LI-RBW 64 with speed of 60 bottles per minute for lower speed requirement and also require small area compare to LI-RBW 100.

Salient Features:

16 Jets for each washing zones

All contact parts made of SS-316 material

Machine construction is in SS-304 material

Suitable for 15 ml to 1000 ml Bottle Size*

Machine with Geneva-Cam Mechanism

Washing sequence can be made as per customers requirements.

Built-in 2 Pumps and 2 Tanks

Machine main drive with Safety Clutch System

Multi Jet Ampoule Vial Washing Machine is designed to wash the outer surface of round shaped Vials (5 ml to 100 ml vials) This machine washes the outer sides of vials and eliminates the particles that are formed on the Vials, which are previously filled and sealed.

Special Features:

Infeed Turn Table.

Imported Gear Motor for main drive, unscramble and scrambler.

A.C. Frequency Drive for main drive, unscramble and scrambler.

No Vial No Washing system.

Acrylic Cabinet for machine.

Total cGMP model.

S.S frame structure.

Can handle vial sizes from 5ml to 100ml with the help of Change Parts.

No Vial No Washing system eliminates wastage of water & air.

Easy cleaning & maintaining.

Machine can be equipped with PLC system optionally.

Stops supply of water & air when acrylic doors opened during operation.

Normal water required for washing. No hot water required.

When there is no vial on conveyor, it stops the water & air supply.

Injectable Vial Filling & Rubber Stoppering Machine is suitable for Round Vials with maximum speed of 240 Vials per minutedepending on nature of Liquids, Vial Neck Size, Fill Volume and Rubber Stopper size. Machine construction in fully Stainless-Steel finish including machine frame structure. Machine with built-in Turn Tables at In-feed and Out-feed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with Liquids and Rubber Stoppers are made from SS 316 Materials. Machine also available with vaccumetric type Rubber Stoppering System.

Special Features:

Total Controls on your figure tips.

Servo based filling volume adjustment. Easy to adjust filling volume from PLC screen.

Easy to maintain and changing spare part, changing format form for different vial sizes.

Suitable for the filling Volume of 2ml to 100ml.

Volume adjustment by pic controls.

Provision of Manually fine volume adjustment

Higher accuracy with higher speed due to servo control continuous motion.

Provision of half and full stoppering.

Inbuilt Scrambler &Unscr ally or fully stopper filled vials.

Vial filling machine shall be equipped with eject collect tray for un stopper Vials.

Provision for inert gas purging pre and post the filling.

Rejected without stopper vial shall be store in a safe condition,

Vial filling machine shall perform the following functions.

Vial half stoppering.

Nitrogen purging (pre and post fill).

Fallen vial eject, no stopper ejects.

Ambler with rejected vial collect facility.

Rigid vibration free construction for trouble free performance

Pick and place type stoppering machine

Vial filling machine shall be equipped with pumps with an accuracy of 0.5 on the

fill volume.

Suitable for Plain as well as Slotted Stoppers, with the help of change parts

High Precision manufactured Syringes (2 Nos.)

Servo Motor driven Syringes

Glass Vial Liquid Filling & Rubber Stoppering Machine is suitable for Round Vials with maximum speed of 240 Vials per minutedepending on nature of Liquids, Vial Neck Size, Fill Volume and Rubber Stopper size. Machine construction in fully Stainless-Steel finish including machine frame structure. Machine with built-in Turn Tables at In-feed and Out-feed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with Liquids and Rubber Stoppers are made from SS 316 Materials. Machine also available with vaccumetric type Rubber Stoppering System.

Special Features:

Total Controls on your figure tips.

Servo based filling volume adjustment. Easy to adjust filling volume from PLC screen.

Easy to maintain and changing spare part, changing format form for different vial sizes.

Suitable for the filling Volume of 2ml to 100ml.

Volume adjustment by pic controls.

Provision of Manually fine volume adjustment

Higher accuracy with higher speed due to servo control continuous motion.

Provision of half and full stoppering.

Inbuilt Scrambler &Unscr ally or fully stopper filled vials.

Vial filling machine shall be equipped with eject collect tray for un stopper Vials.

Provision for inert gas purging pre and post the filling.

Rejected without stopper vial shall be store in a safe condition,

Vial filling machine shall perform the following functions.

Vial half stoppering.

Nitrogen purging (pre and post fill).

Fallen vial eject, no stopper ejects.

Ambler with rejected vial collect facility.

Rigid vibration free construction for trouble free performance

Pick and place type stoppering machine

Vial filling machine shall be equipped with pumps with an accuracy of 0.5 on the

fill volume.

Suitable for Plain as well as Slotted Stoppers, with the help of change parts

High Precision manufactured Syringes (2 Nos.)

Servo Motor driven Syringes

Ampoule Filling and Sealing Machine is used for filling and sealing of glass ampoules. Machine is widely uses in pharmaceutical, biotech, cosmetic, veterinary & chemical industry. We design Ampoule Filling and Sealing Machine as per our standard model as well as custom made models according to customers specific requirements.

Machine built on principal of slant travel of ampoules while filling and sealing to take care wide variation of ampoule neck dimensions, thicknesses and ovality of available ampoules. Ampoule Filling and Sealing Machine is built on Stainless Steel square pipes frame & totally encompassed with Stainless Steel coverings in pleasing matt finish design. Large opening area configured on bottom side of the machine for absolute cleaning and maintenance of the machine.

The pendant type electrical control panel is lifted from machine for ease of operation and safety.

Salient Features:

Compact GMP model

Production output ranging from 30 ampoules/minute to 150 ampoules/minute

All contact parts made from AISI SS 316L & other Non-contact parts made from AISI SS 304.

Machine is suitable to fill 1ml to 20ml ampoules and minimum change over parts from 1ml to 20ml ampoule size

No Ampoule No Filling system

Ampoule neck centering during gas flushing and filling operations

Possibility of nitrogen gas flushing before, during and after filling

Full accessibility allows easy maintenance

Machine equipped with pre-warming station

Minimum change over time, little maintenance & easy cleaning

Capsule Polishing Machine uses the rotating brush principle to clean the capsules on continuous basis. Capsules are fed into the polishing chamber where a rotating spiral brush removes the powder particles sticking from the outer surface of capsules. The polishing chamber is to be connected to a vacuum cleaner to suck the de-dusted powder from the polishing chamber. This helps improving the polishing quality of Capsules.

Salient Features:

Complies as per cGMP standards

All contact parts with the capsules made from Stainless Steel 304 or 316 material.

The polishing chamber lined with nylon net.

VFD Control Drive

Separate Dust Collection System

The polishing chamber inclination can be adjusted to suit the formulation.

Provision of compressed air for cleaning the nylon brush.

No change parts are required for different size of capsules.

Easy to dismantle, wash and reassemble.

No maintenance is required for polishing machine except for periodic cleaning,

Compact size design, easy to shift and occupies minimum floor area.

Mounted on a stand with locking type wheels and can be freely moved about and taken to any place for putting it in operation.

Auger Powder Filling Machine is suitable for Filling Dry Syrup, Powder and Granules in different type and shape of bottles with maximum speed up to 60 Bottles per minute depending on Fill Volume, type of Powder and Bottle Size using Single track twin hopper system. Machine with proven Augur type Powder Filling System for filling higher grammage of Powder in Single Dose. All Parts coming in contact with powder are made from SS316, Nylon and HDPE material. Machine with no change parts system for change in Size of Bottles due to pneumatically operated bottle separator system. Machine with built in Turn Table for Round Bottle at the infeed for continues feeding of bottles.

Special Features:

No Bottle - No Fill System

All contact parts made of SS316 and Nylon/HDPE material with easy removal system for Cleaning

Machine construction in SS304 material

Variable Frequency Drive Speed Control

Built in Turn Table at infeed side with Separate Drive for speed control

Low Air - Machine Stop System

Heavy Duty Mounting system for Filling Head for Trouble Free long-term operations.

Automatic Capsule Polisher Model LI-CPuses the rotating brush principle to clean the capsules on continuous basis. Capsules are fed into the polishing chamber where a rotating spiral brush removes the powder particles sticking from the outer surface of capsules. The polishing chamber is to be connected to a vacuum cleaner to suck the de-dusted powder from the polishing chamber. This helps improving the polishing quality of Capsules.

Fluid bed dryer

is used for drying the product at desired temperature like wet powder that is been produced by the hot air of thefluid bed dryermoving in upward direction. In order to acquire uniform temperature & high heat transfer rate, the granules are fully fluidized with the help of electrical hot air or powerful steam. For uniform drying of the granules or powder, the unique design of the fluid bed dryer does it without any racking process. The fluidized bed drying technology is been used in different industries including the powder processing industry, pharmaceutical industry that has proved many advantages to the industries. The method of thefluid bed dryerhas reduced the tray drying process & time as compared to uneven drying in trays. Hence, fluid bed dryer is the energy saving solution for drying of your product. This fluid bed dryer has a sturdy built because of its 2 bar construction. Moreover, the material used in its construction of this high tech machine is flameproof. This fluidised bed dryer is widely used in the drying of powders, mixing of powders and agglomeration in pharmaceutical, chemical, foodstuff, dairy and many other process industries. This fluid bed dryer has a sturdy built because of its 2 bar construction. Moreover, the material used in its construction of this high tech machine is flameproof. This fluidised bed dryer is widely used in the drying of powders, mixing of powders and agglomeration in pharmaceutical, chemical, foodstuff, dairy and many other process industries.

Horizontal Cylindrical Autoclaves, manufactured by LODHA are best suitable for Healthcare and Pharmaceutical industry, where large volume of sterilization is required. Designed ergonomically, our range of high pressure horizontal autoclave sterilizers is ideal for academic facilities, biotech industries, pharmaceutical industries, hospitals, research centres and food and beverage industries. These units efficiently meet stringent sterilization requirements and well suited for sterilizing hospital dressings and surgical instruments, rubber and plastic goods, glassware and utensils etc.

Automatic Strip Packing Machine Model LI-STis designed with advanced features considering the needs of the Pharmaceutical Packng Industry. Automatic Strip Packing Machine delivered unmatched performance at a high speed and low maintenance. It is most suitable for the sealing of uncoated or coated tablets, capsules, or lozenges of different shapes and sizes in various materials such as aluminium foils, cellophane, polythene, or any other type of heat sealing material.

Ethylene Oxide Sterilizationprocess plays a vital role in achieving highest-level healthcare infection control. To deliver the high standard healthcare facility at a cost effective price and assurance of infection control, sterilization of vital medical devices is utmost important.

We offer a wide range ofEO Sterilizersused in hospitals, which operates on 100% EO cartridges. Equipped with PLC & HMI, it is totally automatic to ensure high accuracy of process and safety of operator & environment. The single door chamber is made from stainless steel.

Hospital ETO Sterilizer

has a facility of humidifying the load so that the required RH is maintained. It creates a deep vacuum with its inbuilt vacuum system, without any water. It also comes with a heating system that maintains the desired temperature effectively. Moreover, a complete range of handling accessory is provided for high flexibility.