Liquid Foods Engineering

Ambad, Nashik, Maharashtra

We are one of the leading manufacturers and suppliers of Milk Coolers. Milk Coolers are ideal for the improvement of milk quality. Milk Coolers consist of a pack of corrugated metal plates of SS 316 and assembled between a fixed frame plate and movable pressure plate. These are positioned by upper and lower carrying bars and compressed by tightening bolts. The frame is M.S. cladded with SS 304.

Key Features:

• Uniform flow over entire plate.
• Long operation times.
• Maintains hygiene levels.
• Easy maintenance.

Capacity:

• 500 10, 000 LPH

We are one of the leading manufacturers and suppliers of homogenizers for milk. Homogenizing is the process of increasing the consistency of the product by high pressure of displacement. We make a simple design construction, complete with all the options easily integrated into the system, as low maintenance and ready to be used easily.

Technical Aspects:

• Housing high quality cast iron.
• All contact parts and chambers made from AISI 304/ AISI 316
• Two-stage homogenizing head.
• Homogenizing valve seat made up of high quality stellite.
• Imported diaphragm type, glycerin filled pressure gauge made in Denmark.
• Sanitary design for CIP.
• Plunger seal consists of gland packing, made of special food grade material.

Key Features:

• Excellent performance at high pressures.
• High reliability in continuous processing.
• High efficiency.
• Safe and easy to use.
• Easy maintenance.
• Reduced environmental impact.

Capacity :

• 100 5, 000 LPH

We are one of the leading manufacturers and suppliers of Pasteurised Milk Storage Tanks. Pasteurised Milk Storage Tanks are widely used in dairy industries and are designed to ensure that the entire volume keep stays cold.

The tank has a cylindrical shell, a conical top and bottom 15 of stainless steel 304. Inside the tank the welding lines are ground and polished and on the outside, welding lines are pickled or brushed. The whole tank except the top is insulated with mineral wool and a propeller type agitator with motor for avoiding sedimentation in milk.

Key Features:

• Dimensional accuracy.
• High grade of stainless steel.
• Maintains hygiene levels.
• Easy maintenance.

Capacity:

• 500 10, 000 Litres

We are one of the leading manufacturers and suppliers of homogenizers for yoghurt milk. Homogenizing is the process of increasing the consistency of the product by high pressure of displacement. We make a simple design construction, complete with all the options easily integrated into the system, as low maintenance and ready to use easily.

Technical Aspects:

• Homogenizer housing high quality of cast iron.
• All contact parts and chambers made from AISI 304/ AISI 316.
• Two-stage homogenizing head.
• Homogenizing valve seat made up of high quality stellite.
• Imported diaphragm type glycerin filled pressure gauge made in Denmark.
• Sanitary design for CIP.
• Plunger seal consists of gland packing, made of special food grade material.

Key Features:

• Excellent performance at high pressures.
• High reliability in continuous processing.
• High efficiency.
• Safe and easy to use.
• Easy maintenance.
• Reduced environmental impact.

We are one of the leading manufacturers and suppliers of Yoghurt and Buttermilk Processing Tanks. Yoghurt and Buttermilk Processing Tanks are widely used in dairy industries.

The tank has a cylindrical inner shell on the outside, provided with dimple jacket with an inlet and outlet media through the outer shell, a conical top and bottom 15 of stainless steel 304. Inside the tank, the cylindrical part, welding lines are ground and on the outside, welding lines are pickled and brushed. The whole tank, except the top is insulated with mineral wool and a propeller type agitator with motor for avoiding sedimentation in milk.

Key Features:

• Dimensional accuracy.
• High grade stainless steel.
• Maintains hygiene levels.
• Easy maintenance.

Capacity:

• 500 2, 000 Litres

We are one of the leading manufacturers and suppliers of Yoghurt Milk Coolers and Heaters. Yoghurt Milk Coolers and Heaters consist of a pack of corrugated metal plates of SS 316 and assembled between a fixed frame plate and movable pressure plate. These are positioned by upper and lower carrying bars and compressed by tightening bolts. The frame is M.S. cladded with SS 304.

Key Features:

• Uniform flow over entire plate.
• Long operation times.
• Maintains hygiene levels.
• Easy maintenance.

Capacity:

• 500 10, 000 LPH

We are one of the leading manufacturers and suppliers of insulated and non-insulated rectangular tanks with partition plates used as Paneer Vat. These Paneer Vats are manufactured using high quality raw material.

Key Features:

• Easy operation.
• Low maintenance.

We are one of the leading manufacturers and suppliers of Homogenizers for Ice Cream Mix. Homogenizing is the process of increasing the consistency of the product by high pressure of displacement. We make a simple design construction, complete with all the options easily integrated into the system, as low maintenance and ready to use easily.

Technical Aspects:

• Homogenizer Housing High Quality of cast iron
• All contact parts and chambers made from AISI 304/ AISI 316
• Two stage Homogenizing head.
• Homogenizing valve seat made up from High Quality of Stellite.
• Imported Diaphragm type glycerin filled Pressure Gauge made in Denmark.
• Sanitary design for CIP.
• Plunger seal consists of gland packing, made of special food grade material.

Key Features:

• Excellent performance at high pressures
• High reliability in continuous processing
• High efficiency
• Safe and easy to use
• Easy maintenance
• Reduced environmental impact

Capacity:

• 100 5, 000 LPH

We are one of the leading manufacturers and suppliers of Ageing Tanks. Ageing Tanks are widely used in ice cream industries and are designed to ensure that the entire volume keep stays cold.

The tank has a cylindrical inner shell on the outside provided with built-in refrigerated system or dimple jacket with an inlet and outlet media through the outer shell, a conical top and bottom 15 of stainless steel 304. Inside the tank, the cylindrical part, welding lines are ground and on the outside, welding lines are pickled and brushed. The whole tank, except the top, is insulated with mineral wool and a propeller type agitator with motor for avoiding sedimentation in milk

Key Features:

• Dimensional accuracy.
• High grade stainless steel.
• Maintains hygiene levels.
• Easy maintenance.

Capacity:

• 300 2, 000 Litres

We are one of the leading manufacturers and suppliers of Continuous Ice Cream Freezer. Continuous Ice Cream Freezeris the ideal machine to make ice cream mix into ice cream at standard condition of mix temperature of ( + ) 4 C and ice cream out let temperature ( ) 5 C.

Key Features:

• Frame and covering panels are made from high quality of SS 304.
• Hard chrome plated cylinder.
• Antifreeze protection device.
• Suction and discharge pressure gauges for refrigerant circuit.
• Hot gas supply to freezing cylinder.
• Interlock and safety controls for single phase, over load, low and high refrigerant pressures.
• Power supply 440 volts for 3 phase.
• Easy for operating, handling and cleaning.

Capacity:

• 100 to 400 LPH

We are one of the leading manufacturers and suppliers of Cleaning-In-Place (CIP) system. CIP system is used for cleaning process equipment such as pasteurizers, sanitary pipes, tanks, plate heat exchangers and filling machines etc.

CIP System that helps in maintaining the hygienic standards and protecting the products from degradation & contamination. The cleaning is fully adjustable to meet the demands of each cleaning objects, i.e. cleaning time, concentration, temperature and flow.

The C.I.P system includes solution storage tanks, supply pump, heat exchanger, process valves, sensors and all necessary piping and wiring.

We are one of the leading manufacturers and suppliers of Paneer Cutter, manual as well as pneumatic. These Paneer Cutters are manufactured using high quality raw material.

Key Features:

• Easy operation.
• Low maintenance.

We are one of the leading manufacturers and suppliers of Paneer Press, manual as well as pneumatic. This Paneer Press is manufactured using high quality raw material.

Key Features:

• Easy operation.
• Low maintenance.