Our Products
Industrial Ceramics Products
2 Products availableIndustrial & Oil Seals
1 Products availableMetal Joints
1 Products availableBearing Parts
1 Products availableCompression Molded Rubber
1 Products availableHammers, Pliers & Screwdrivers
1 Products availablePumps, Pumping Machines & Parts
1 Products availablePump Parts
1 Products availableTransmission Seal
1 Products availableBEARING ISOLATOR
A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in. Bearing isolators do not require lubrication or any particular shaft finish or condition.
The best bearing isolators are made of metal, usually bronze, and they utilize a vapor-blocking feature, which inhibits the free transfer of vapor contamination when the rotating equipment is cycled on and off.
Advantage:
SINGLE SPRING SEALS
Single Spring Seals are single helical coil spring, bi-directional seal developed for usage where media is dirty and clogging type. Internally mounted seal, therefore suitable for wide-spread applications. Torque is transmitted by drive lugs from drive collar to spring holder and seal rings. All components are held together by snap ring which helps in easier installation and removal.
Industrial Application:
Process Industries, Oil Refinery, Pharmaceutical, Solvents, Paper & Pulp Industries etc.
Face Materials:
Tungsten Carbide, Carbon, Silicon Carbide, Ceramic, Special Cast.
Metal Component:
S.S 304, S.S 316, Alloy 20, Hastelloy C.
Secondary Seal:
Viton, TTV, FKM, NBR, EPR, PTFE.
Operating Limits: