GST : 24AAGFL8957P1ZG
Verified
Write a Review
Our Products
Sensors
1 Products available16 Watt to 150 Watt LED Street Light -Electra model -Frame model -Glass Model -Lens Model -Capsule model -Leo Model STANDARD Quality IP66 drivers\r\nOSRAM LED chip\r\n10KV surge protection\r\nAuto cuttoff at 300 volt\r\nCRI 80\r\nLumens per watt
model lt-90wsl
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 90
wattage 90 w
dimension 415 18052 mm3
weight 1.995 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 90 watt
led lumens efficiency 140 lumens / watt
maximum lumens 12600 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-150WSL
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 150
Wattage 150 W
Dimension 530 263 65 mm3
weight 5.1 Kg
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 150 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 21000 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-100wsl-electra
certification iso, ce, rohs, bis, lm79 or lm80, tm
wattage 100
dimension 410 195 65 mm3
weight 1.995 kg
number of leds 20
optical lens 30, 45, 60 0r 90 degree polycarbonate lens
led brand osram/cree/edison/crescent/kwality/samsung led of 2 watt
(as per requirements)
power consumption 100w
led lumens efficiency 140 lumens / watt
maximum lumens 12600 lm
beam angle 30, 45, 60, 90 degree lens (as per customers requirement)
led working voltage 6.2 vdc
led working current 150 ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
pole entry diameter 50 mm
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
pole entry diameter 50 mm
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-90WSL-F
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Wattage 90
Dimension 410 195 65 mm3
Weight 2.250 Kg
Number of LEDs 90
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 90W
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 12600 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-120WSL
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 120
Wattage 120 W
Dimension 530 263 65 mm3
weight 4.345 Kg
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 120 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 16800 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-60wsl-f
certification iso, ce, rohs, bis, lm79 or lm80, tm
wattage 60
dimension 410 195 65 mm3
weight 2.0 kg
number of leds 60
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 60w
led lumens efficiency 140 lumens / watt
maximum lumens 8400 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-60wsl
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 60
wattage 60 w
dimension 415 18052 mm3
weight 1.775 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 60 watt
led lumens efficiency 140 lumens / watt
maximum lumens 8400 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-40wsl-leo
certification iso, ce, rohs, bis, lm79 or lm80, tm
wattage 40
dimension 320 85 55 mm3
weight 0.700 kg
number of leds 10
optical lens polycarbonate lens
led brand osram led of 5 watt 5050
power consumption 40w
led lumens efficiency 140 lumens / watt
maximum lumens 5600 lm
beam angle 90 degree focusing lens
led working voltage +6.2 vdc
led working current 600ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-100WSL-F
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Wattage 100
Dimension 410 195 65 mm3
Weight 2.250 Kg
Number of LEDs 100
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 100W
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 14000 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-150WSL-F
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Wattage 150
Dimension 515 260 70 mm3
Weight 4.310 Kg
Number of LEDs 150
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 150W
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 21000 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-50WSL-F
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Wattage 50
Dimension 372 146 65 mm3
Weight 1.365 Kg
Number of LEDs 50
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 50W
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 7000 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-24WSL-PRO
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 24
Wattage 24 W
Dimension 345 10747 mm3
weight 0.785 Kg
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 24 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 3360 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : D/A, D/P, T/T,
Delivery Time : 3 DAYS
DESCRIPTION
|
Model |
LT-24WSL-PRO |
|
|
Certification |
ISO, CE, RoHS, BIS, LM79 or LM80, TM |
|
|
Number of LEDs |
24 |
|
|
Wattage |
24 W |
|
|
Dimension |
345 ×107×47 mm3 |
|
|
weight |
0.785 Kg |
|
|
LED Brand |
OSRAM/Cree/Edison/Crescent/Kwality/Samsung (As per requirements) |
|
|
Power Consumption |
24 Watt |
|
|
LED Lumens Efficiency |
140 Lumens / Watt |
|
|
Maximum Lumens |
3360 lm |
|
|
Beam Angle |
120 Degree |
|
|
LED Working Voltage |
+6.2 VDC |
|
|
LED Working Current |
150mA |
|
|
Input Voltage |
85 – 300 VAC(Auto cut off above 310V)(Protection up to 440 V) |
|
|
Operating Frequency |
50/60 Hz |
|
|
Power Factor |
>0.95 |
|
|
Ambient Temp(Ta) |
50⁰C |
|
|
Case Temp(Tc) |
75⁰C |
|
|
CRI |
80 |
|
|
Efficiency |
>87% |
|
|
Color |
White/Warm White (As per order) |
|
|
Color Temperature |
2700-6500K (As per order) |
|
|
Body Type |
Pressure die cast Aluminum alloy for housing gear, Extruded aluminum lamp housing (heat sink) for Better heat transmission. |
|
|
IP rating |
IP65/IP66 |
|
|
Working Hours |
>50000 hours |
|
|
Surge Protection |
Inbuilt Driver surge protection – 4 KV Extra SPD surge protection – 10 KV (As per Requirement) |
|
|
Electrical Protections for LED Driver |
- Single shot no-load latching protection / output short-circuit protected with auto-recovery -Under voltage protection -Output short circuit protection - Auto-recovering thermal shutdown with large hysteresis protects Both components and printed circuit board - No damage during brown-out conditions |
|
|
LED PCB Detail |
Thickness 1.6 mm (±5% tolerance) PCB material – Aluminum-copper Copper layer thickness – Standard 0.35 micron Copper conductivity – 1 Watt |
|
|
Additional Features |
- Plug & Play Device - Corrosion free Body Material, Dust proof, Rugged - Easy to Install, Easy to maintain- Suitable in any Environmental Condition - Save Up to 70% of Electricity |
|
|
Terminology |
Earth – Green or Yellow Line Positive – Red or Brown Neutral – Blue or Black |
|
Model LT-30WSL
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 30
Wattage 30 W
Dimension 390 14750 mm3
weight 1.215 Kg
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 30 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 4200 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-24WSL-PREMIUM
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 24
Wattage 24 W
Dimension 390 14750 mm3
weight 1.165
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 24 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 3360 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-24WSL-LENSE-R
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Wattage 24
Weight 0.800 Kg
Number of LEDs 24
Optical lens Polycarbonate 90 degree lens
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 24W
LED Lumens Efficiency >140 Lumens / Watt
Maximum Lumens 3360 lm
Beam Angle 90 Degree with lense
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-50WSL-LEO
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Wattage 50
Dimension 32085 55 mm3
Weight 0.750 Kg
Number of LEDs 10
Optical lens Polycarbonate lens
LED Brand OSRAM led of 5 watt 5050
Power Consumption 50W
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 7000 lm
Beam Angle 90 Degree focusing lens
LED Working Voltage +6.2 VDC
LED Working Current 750mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-24WSL-CAPSULE
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 24
Dimension 270 80 50 mm3
Weight 0.680 Kg
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 24 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 3360 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Copper conductivity 1 Watt
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-50WSL-LENSE
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Wattage 50
Dimension 407 162 50 mm3
Weight 1.110 Kg
Number of LEDs 50
Optical lens Polycarbonate 90 degree lens
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 50W
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 7000 lm
Beam Angle 90 Degree with Lens
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-72wsl-f
certification iso, ce, rohs, bis, lm79 or lm80, tm
wattage 72
dimension 410 195 65 mm3
weight 2.250 kg
number of leds 72
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 72w
led lumens efficiency 140 lumens / watt
maximum lumens 10080 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-50WSL-ECO
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 50
Wattage 50 W
Dimension 390 14750 mm3
weight 1.345
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 50 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 7000 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-36wsl-lense
certification iso, ce, rohs, bis, lm79 or lm80, tm
wattage 36
dimension 355 125 50 mm3
weight 0.695 kg
number of leds 36
optical lens polycarbonate 90 degree lens
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 36w
led lumens efficiency 140 lumens / watt
maximum lumens 5040 lm
beam angle 90 degree with lens
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-30WSL
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 30
Wattage 30 W
Dimension 390 14750 mm3
weight 1.215 Kg
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 30 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 4200 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-72wsl
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 72
wattage 72 w
dimension 415 18052 mm3
weight 1.995 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 72 watt
led lumens efficiency 140 lumens / watt
maximum lumens 10080 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-100WSL
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 100
Wattage 100 W
Dimension 415 18052 mm3
weight 1.998 kg
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 100 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 14000 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-45wsl
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 50
wattage 45 w
dimension 390 14750 mm3
weight 1.215 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 45 watt
led lumens efficiency 140 lumens / watt
maximum lumens 6300 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
