GST : 24AAGFL8957P1ZG
Verified
Write a Review
Our Products
Sensors
1 Products available20 watt to 1000 Watt LED flood lights available with excellent quality and various designs.\r\n-Estella model\r\n-Back choke model\r\n-Lens model\r\n-Slim model\r\n-Eco slim model\r\nSTANDARD Quality IP66 drivers\r\nOSRAM LED chip\r\n10KV surge protection\r\nAuto cuttoff at 300 volt\r\nCRI 80\r\nLumens per watt
model lt-250wfl-bc
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 250
wattage 250 w
dimension 340 490 140 mm3
weight 8.87 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 250 watt
led lumens efficiency 140 lumens / watt
maximum lumens 35000 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-350wfl-bc
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 350
wattage 350 w
dimension 340 490 140 mm3
weight 9.5 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 350 watt
led lumens efficiency 140 lumens / watt
maximum lumens 49000 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-100wfl-bc
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 100
wattage 100 w
dimension 235 290 135 mm3
weight 2.96 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 100 watt
led lumens efficiency 140 lumens / watt
maximum lumens 14000 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
Model LT-50WFL-BC
Certification ISO, CE, RoHS, BIS, LM79 or LM80, TM
Number of LEDs 50
Wattage 50 W
Dimension 185 245 120 mm3
Weight 2.0 Kg
LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung
(As per requirements)
Power Consumption 50 Watt
LED Lumens Efficiency 140 Lumens / Watt
Maximum Lumens 7000 lm
Beam Angle 120 Degree
LED Working Voltage +6.2 VDC
LED Working Current 150mA
Input Voltage 85 300 VAC(Auto cut off above 310V)(Protection up to 440 V)
Operating Frequency 50/60 Hz
Power Factor >0.95
Ambient Temp(Ta) 50C
Case Temp(Tc) 75C
CRI 80
Efficiency >87%
Color White/Warm White (As per order)
Color Temperature 2700-6500K (As per order)
Body Type Pressure die cast Aluminum alloy for housing gear, Extruded
aluminum lamp housing (heat sink) for Better heat transmission.
IP rating IP65/IP66
Working Hours >50000 hours
Surge Protection Inbuilt Driver surge protection 4 KV
Extra SPD surge protection 10 KV (As per Requirement)
Electrical Protections for
LED Driver
- Single shot no-load latching protection /
output short-circuit protected with auto-recovery
-Under voltage protection
-Output short circuit protection
- Auto-recovering thermal shutdown with large hysteresis protects
Both components and printed circuit board
- No damage during brown-out conditions
LED PCB Detail Thickness 1.6 mm (5% tolerance)
PCB material Aluminum-copper
Copper layer thickness Standard 0.35 micron
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-36wfl-bc
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 36
wattage 36 w
dimension 150 205 100 mm3
weight 1.37 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 36 watt
led lumens efficiency 140 lumens / watt
maximum lumens 5040 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-150wfl-bc
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 150
wattage 150 w
dimension 255 340 135 mm3
weight 4.45 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 150 watt
led lumens efficiency 140 lumens / watt
maximum lumens 21000 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-200wfl-bc
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 200
wattage 200 w
dimension 295 380 145 mm3
weight 5.76 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 200 watt
led lumens efficiency 140 lumens / watt
maximum lumens 28000 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-400wfl-bc-eco
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 400
wattage 400 w
dimension 340 490 140 mm3
weight 10 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 400 watt
led lumens efficiency 140 lumens / watt
maximum lumens 56000 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
model lt-200wfl-bc-pro
certification iso, ce, rohs, bis, lm79 or lm80, tm
number of leds 200
wattage 200 w
weight 5.22 kg
led brand osram/cree/edison/crescent/kwality/samsung
(as per requirements)
power consumption 200 watt
led lumens efficiency 140 lumens / watt
maximum lumens 28000 lm
beam angle 120 degree
led working voltage +6.2 vdc
led working current 150ma
input voltage 85 300 vac(auto cut off above 310v)(protection up to 440 v)
operating frequency 50/60 hz
power factor >0.95
ambient temp(ta) 50c
case temp(tc) 75c
cri 80
efficiency >87%
color white/warm white (as per order)
color temperature 2700-6500k (as per order)
body type pressure die cast aluminum alloy for housing gear, extruded
aluminum lamp housing (heat sink) for better heat transmission.
ip rating ip65/ip66
working hours >50000 hours
surge protection inbuilt driver surge protection 4 kv
extra spd surge protection 10 kv (as per requirement)
electrical protections for
led driver
- single shot no-load latching protection /
output short-circuit protected with auto-recovery
-under voltage protection
-output short circuit protection
- auto-recovering thermal shutdown with large hysteresis protects
both components and printed circuit board
- no damage during brown-out conditions
led pcb detail thickness 1.6 mm (5% tolerance)
pcb material aluminum-copper
copper layer thickness standard 0.35 micron
copper conductivity 1 watt
.Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 3 DAYS
