Lento Industries Private Limited

Dilshad Garden, Delhi

Based in Delhi, we are the leading supplier and manufacturer of Portable Solar Lanterns. Our lanterns are highly efficient, portable and have been manufactured after intensive research and development. These Portable Solar Lanterns exceeds the specifications stated by MNRE. The lanterns have been built in order to be highly affordable but they are durable, rugged, have long life and require low maintenance. The lanterns that we produce are extremely popular in the remote as well as the village areas. They are available at cost effective rates and are sufficient to provide a considerable amount of lighting in the remote as well as the village area.

Features and advantages of Lento Solar Lanterns

• Portable, light weight, easy to connect and use

• Uses sealed lead acid, maintenance-free 12v/7Ah SMF battery

• SMD LED consume less power but high light output of over 110 lumens/watt with facility to set low and high intensity

• Aesthetic, ergonomic design with ABS Body, acrylic lens and handle

• Aesthetic, ergonomic design with ABS Body, acrylic lens and handle

• High efficiency compact SPV Charging unit with silicon crystalline cells

• High performance, high efficiency (over 85%) microprocessor based electronic circuitry with automation to control charging and deep discharge, on-off switch, fuse and mobile charging socket with indicators for battery charging, battery fully charged and battery deep discharge

• Fully protected against over charge, reverse polarity of battery and solar module as well as deep discharge

• Charge controller disconnects load if battery voltage falls below 11V and reconnects when battery voltage reaches 12.5V, provides constant charging voltage of 14.5V.

• Idle current consumption is less than 1 mA

Operating from Delhi, we offer a wide range of Electrical Wires and Cables that conform to IS specifications. Being the leading manufacturer and supplier of Electrical Wires and Cables, we offer different cables for wiring purposes such as multi-core single cable and two- as well as three- wire molded cables. Our company even offers specialist multiple core cables that have been enclosed with single sheathing giving it a nice and neat appearance.

Lento range of wires and cables covers:

• Light duty cables—electrical, flexible, 3 core and multiple core, battery and auto cables
• Power and control cables—low voltage and high voltate power cables and wires
• Communication cables—coaxial, OFC, JFC, telephone, LAN and CCTV cables.

We are the leading manufacturer and supplier of LED Bulbs and Tubelights from Delhi. These definitely stand out in terms of high lumen output, output, quality, color rendering quality. They are durable and have a long life. Our LED bulbs and tube lights have been manufactured by way of SMD based LED lamp that ensure due heat dissipation thus extending the useful of the LED. The bulbs have a special vent for easy air flow. It will give a true value for money experience.

Salient Features :

• High efficiency, high lumen output SMD LEDs sourced from the world’s topmost LED manufacturers

• Integrated heat sink and sophisticated controller to extend life of the LEDs

• ED bulbs available in 3 W to 60 W, in screw type and bayonet type with opaque diffuser to mimic light distribution pattern of incandescent bulbs to fit into existing sockets.

• LED tubes are fitted in polymer casing, using same LED SMD types in strip configuration with same controller and heat sinks, directly fitting into existing fluorescent tube fixtures.

• Available in cool, warm and natural daylight color temperatures.

• Life from 50000 to 100000 hours

We are the leading manufacturer and supplier of Electrical Power Distribution Box from Delhi. Our company has brought forward a range of power distribution boxes that have been made by way of thick gauge pressed steel sheets and the punched cutouts. The power distribution boxes from us have been specially powder coated to withstand the tough weather conditions. We welcome bulk orders with an assurance of timely delivery.

Features :

• Customized as well as standard options in terms of dimensions
• Power coated
• Die punched cutouts
• Thick guage MS sheet steel used for fabrication with seamless look
• Designed for permanent or temporary installations

We are the leading supplier and manufacturer of Electrical MCB and MCCB that have been certified and approved. Our MCBs can be availed in multiple ranges from 6A to 63 Amps in multiple versions such as single, double and triple. They are backed with sensitive thermal circuit breakers that might trip immediately to avoid overload or short circuit. Electrical MCB and MCCB have an ABS body that is fire resistant and are backed with superior quality magnetic/thermal spring loaded components. Based, in Delhi, our Electrical MCB and MCCB conform to IS standards.

Features :

• Moulded ABS fire resistant housing
• High quality magnetic/thermal spring loaded components
• High grade brass/copper contacts
• Conforms to IS standards

Based in Delhi, we are the leading manufacturer and supplier of surge protector. Our surge protectors have an ergonomic design and ABS body. We incorporate the power strips that are simple in design yet highly effective. It will aid in keeping the precious electrical equipment and electronic devices protected against noise and power surges. It can be used for connecting in the audio/video equipment, computers or any other device. They have an MOV for surge protection making them safe from damaging power surges, peaks or transients.

Features :

• ABS case
• 6 high quality sockets using brass connector contacts with 6A rating each
• MOV for surge protection
• Toroidal choke coils and capacitors to filter out interference and noise

Based in Delhi, we are the most celebrated manufacturers and suppliers of LED Emergency Lanterns that not just look stylish but also ensure better performance. Our company has manufactured a wide range of LED Emergency Lanterns starting with a sleek torch to the ultra-bright LEDs. Our LED Emergency Lanterns is powerful; delivers better light output, compact and rechargeable with a SMF rechargeable battery. Our product has an ergonomic ABS body that is available in vivid range of colors and designs. Integrated with the mains based charging unit this SMD LEDs are energy efficient.

Features :

• Unbreakable ABS case, ergonomic, stylish, available in a range of colors and designs

• High efficiency SMD LEDs

• SMF rechargeable battery

• Integrated mains based charging unit

• Portable, lightweight, easy to carry about

• Durable with guaranteed performance

We are the leading manufacturer and supplier of PWM Solar Charger based in Delhi, India. PWM Solar Charger is one of the key products of our company. It is compact, durable and have been ruggedized for operation even in the extreme weather conditions. It has been designed to function in the standalone solar power systems. There the charger is capable of forming an essential link between the battery and the SPV modules. The solar chargers designed by us have a vital role in maintaining the performance, efficiency and health of the battery. Our batteries are MOSFET based.

Salient Features :

• Designed for fool-proof installation even by mechanics with minimum training

• Protection from reverse current flow battery to solar array during night

• Self diagnostics and inbuilt protection features to prevent damages by incorrect terminations, system shorts or connections

• MOSFET based series PWM/MPPT charging technology for improved battery life and maximum performance

• Automatic detection of system voltage

• Use of MOSFETs avoids the use of mechanical relays that are prone to failures

• Can be adapted to charge Gel, tubular or flooded battery types

• Inbuilt temperature detection and compensation for the battery to maintain battery life

• Over charging protection, overheating protection, over discharge protection and overload protection

• Reverse polarity protection

• Potentially increase the charging efficiency by 30% in MPPT based product.

Product Range :

• Available from 10 Amps continuous charging current to 60 Amps to suit different SPV array and battery configurations from 12 to 180 VDC

Based in Delhi, we are the key manufacturers and suppliers of PWM Solar Hybrid System. PWM Solar Hybrid System is suitable for handling higher loads. They have a bank of solar photo voltaic modules that are tied to a bank of batteries. This aids in controlling the interface which is a critical component here. It is equipped with a number of features. It aids in keeping a check on the battery voltage and facilitates optimum charging of battery. It has a quick charging mode and a switch over mode. The switch over mode is capable of monitoring the load by switching it over to the unit senses, in case it is unable to bear the load.

Features :

• Monitoring of battery voltage, optimum charging of battery, state of battery charge monitor, low voltage and overload cut out.

• Quick battery charging mode using solar power or mains power or both with the controller sensing SPV module power and switching to mains if voltage is low, as happens in case of rainy conditions

• Switchover of load to solar when monitoring unit senses it can bear the load. Lento controller monitors and seamlessly switches power in milliseconds, making it ideal even for sensitive electronic devices like computers.

• DSP based sine wave output with fixed 50 Hz 230 V sine wave output. This enhances reliability and durability of equipments that are designed to work on sine waves such as air conditioners, refrigerators, tube lights and fans.

• Energy conservation is highest while battery backup is longest in our DSP based solar hybrid systems.

Salient Features

• Power Saving through No Load Shutdown Feature.

• Monitoring/Data logging feature for better system information at user end (optional).

• DSP based design with absolute and stable sine wave output voltage & frequency.

• State of art MOSFET based PWM technology with greater efficiency at lower cost with dynamic stability.

• Three Stage solar charging (TSSC) suitable for all types of battery charging.

• Combined mains and solar intelligent constant current charging with solar power priority.

• Maximum Solar Power Utilization during charging and backup mode.

• PV availability, battery charging from solar power indication with display on LCD and LED.

• User friendly, feather touch control and selection switches with LED indication on front panel.

• PV pole reversal protection indication on LCD

• Deep discharge battery charging from mains as well as solar.

• More back-up being a sine wave UPS (ASIC Control).

• No humming Noise (Silent UPS)

• Protections such as Mains Fuse Trip, Overload, Short circuit, Battery low, over temperature indication with buzzer as well as display on LCD available.

• Mains available, battery charging/Charged and its voltage indication provided on LCD display as well as LED.

Convenience

• Solar Hybrid DSP uses both Solar Power as well as Mains for charging the battery bank according to parameter priority set, providing the users availability of uninterrupted power supply.

We offer the most superior quality of Telecom Power Supply System to meet the modern day needs of the telecom companies. The engineering capabilities as well as our design are appreciated for acing the market. We are reliable and the most trusted supplier and manufacturer of Telecom Power Supply System to assure uninterrupted operations. Based in Delhi, our Telecom Power Supply System have been uniquely developed with modular telecom UPS and inverters to ensure 24x7 operations.

Features :

• Inverters from 1 KVA to 200 KVA running from 12 V to 60V DC with inbuilt redundances
• Modular UPS with shortest switchover, high reliability and facility for remote monitoring including LAN, SNMP and GSM modules (SNMP technology for total management of telecom power supplies)
• Telecom inverter for upcoming 4G technologies in India

We are the leading supplier and manufacturer of Solar Home Lighting Systems in Delhi, India. We ensure that our lighting system is highly energy efficient and delivers better output to keep the homes lighted during power failures. It can be used both in the rural and urban areas. On being fully charged, it will deliver a lighting output of about 3 to 4 hours. We have designed the Solar Home Lighting Systems in order to deliver maximum lumen output. They are low on maintenance and have a long life. One can easily put this lighting system to use.

Salient Features :

• System is completely shock proof due to low voltage circuitry.v

• Short circuit protection.

• Safe and easy to install.

• Free from noise, smoke and pollution.

• Required very little attention.

• Possible to expand the system in future.

• Available in different configuration.

• Mobile Charging (Optional)

• FM Radio (Optional)

• Night Lamp (Optional)

• Digital Battery Status (Optional)

Typical Applications & Uses : Lighting for homes, shops, banks, clinics, corridors etc.

Benefits :

• Easy to install.

• No Electric Connection Requied, No electric Bill

Lentos advanced line of affordable solar chargers are compact, ruggedized for operation in extreme weather conditions and are designed for durability. This line of solar chargers are designed to work in standalone solar power systems where they form an essential link between the SPV modules and the battery. Our solar chargers play a crucial role in maintaining battery health, better efficiency and improved performance.

MOSFET based solar charger incorporates circuitry that senses battery voltage. If voltage falls below a certain value the MOSFET switches on through the PWM controller that delivers pulsed power. As battery begins to charge up the power to it progressively reduces and when the battery is fully charged the circuit switches off delivery of power to the battery keeping it in full stand by condition. This circuitry also prevents over charge of battery that can lead to loss of electrolyte. It works unattended and is simply to operate as well as maintain, with the least part count.

Additional circuitry can be incorporated for automatic switch on of power to lights, such as in streetlights. Circuitry is also incorporated to detect battery temperature and to provide deep discharge as well as overload and reverse polarity protection both at input and output of the charger.

+ Designed for fool-proof installation even by mechanics with minimum training+ Protection from reverse current flow battery to solar array during night+ Self diagnostics and inbuilt protection features to prevent damages by incorrect terminations, system shorts or connections+ MOSFET based series PWM/MPPT charging technology for improved battery life and maximum performance+ Automatic detection of system voltage+ Use of MOSFETs avoids the use of mechanical relays that are prone to failures+ Can be adapted to charge Gel, tubular or flooded battery types+ Inbuilt temperature detection and compensation for the battery to maintain battery life+ Over charging protection, overheating protection, over discharge protection and overload protection+ Reverse polarity protection+ Potentially increase the charging efficiency by 30% in MPPT based product.

Available from 10 Amps continuous charging current to 60 Amps to suit different SPV array and battery configurations from 12 to 180 VDC.

Lento offers energy efficient high lumen output LED based solar home lighting systems to keep your home lighted up in the event of power failure. These home lighting systems can be used in urban as well as rural areas. In urban areas home lighting systems help you save power by providing at least 3 to 4 hours of solar powered lighting each day. In rural areas our solar home lighting systems provide that crucial lighting during evening hours to help children study and women to cook and do their work in brightly lit interiors.

Lento has designed its solar home lighting system to give maximum lumen output, be maintenance free and have an extremely long life. It is very simple in construction and easy to deploy. The SPV module has a built in support and users can place it anywhere on the terrace where they receive sunlight for at least 5 to 6 hours. Wires from these connect to the controller unit that also has connections to two LED luminaries and an output socket which can be used to power other devices.

Lento solar home lighting systems use high efficiency solar photovoltaic modules with a small footprint. High efficiency, high lumen white LEDs are used in the luminaries to give higher lumen output but at substantially lower power consumption in comparison to CFL. This means a smaller solar panel and smaller battery can be used at a lower cost for the same duration of light output from the system. It is also lower in cost.

System is completely shock proof due to low voltage circuitry.v+ Short circuit protection.+ Safe and easy to install.+ Free from noise, smoke and pollution.+ Required very little attention.+ Possible to expand the system in future.+ Available in different configuration.+ Mobile Charging (Optional)+ FM Radio (Optional)+ Night Lamp (Optional)+ Digital Battery Status (Optional)Typical Applications & Uses:+ Lighting for homes, shops, banks, clinics, corridors etc.

+ Easy to install

+ No Electric Connection Required, No electric Bill

We are offering premium quality mainline voltage stabilizer for home. Mainline Stabilizer are synthetic in compliance with industrial standards of first-class. Those facilitate easy and handy installation and have low protection requirements. Mainline Stabilizer are clean to put in. No special care or maintenance is needed for those stabilizers. The high-quality of these is checked strictly previous to dispatch for you to make sure complete pleasure of the cease customers. Mainline stabilizer are ready with numerous functions like excessive reduce, low cut, time delay, overload protection and overheat protection. Most of the fashions are managed by way of microprocessors and use todays technology. Range also available 90V-290V available in Single phase and three phase.

> Long Service Life
> Efficient Performance
> Low Maintenance Needs
> Initial Count Down Timer
> Intelligent High Voltage Cut-Off
> Time Delay in Low Voltage Cut-Off
> Zero Cross Over
> Electronic Temperature Sensor
> Metal Galvanished Cabinet
> Multifunction Digital Display
> Microprocessor Technology
> Table Top & Wall Mounting
> Digital Display.

Lento DSP sine wave online UPS feature a wealth of advance features. Designed for use with expensive critical electronics instrumentation, these UPS systems have a host of safety controls to ensure your devices are always protected. Lento DSP online UPS performs very well in case of mains failure, sensing of voltage fluctuations and automatic switchover, lighting guard, electrostatic protection, overvoltage and overload protection, short circuit protection and low battery protection. Lento DSP UPS are configured to be always active when power fails. At the same time, the batteries are kept constantly charged through a monitoring circuit to ensure their longevity. DSP sine wave online UPS are preferred especially when they are Lento with guaranteed frequency and voltage control along with inbuilt protection features.

Lento low-frequency series online UPS meets critical industry standards with its state of art digital intelligence online UPS technologies with the best power factor rating and consistently reliable performance day in and day out.

We are recognized as the foremost manufacturer, exporter and supplier of an exclusive quality array of DSP based UPS series. Specially designed for small data centers and critical load appliances, this range is manufactured using optimum quality factor inputs. Moreover, it is made by experts that rigorously inspect this range on various parameters of quality. Available in various technical specifications this product can also be customized in accordance with preferences laid by our patrons.

Lento has gained a reputation for quality, high performance DSP sine wave online UPS Three Phase system in a wide range of configurations ranging from 5KVA to 100 KVA and more in customized designs. These DSP online UPS systems can have additional modules for network monitoring and logging plugged into them for remote monitoring. High reliability and faultless operation in the most demanding conditions makes Lento DSP UPS the automatic choice for data centres, research institutions, banks and industries that must have a reliable source of power, free from mains borne noise and interference.

+ DSP Based Design with absolute and stable output voltage and frequency
+ Sophisticated PWM technology and comprehensive display
+ Electronic change over, hence much better reliability
+ Quiet operation of AC motors as well as other inductive loads unlike the noise that emanates from modified Sine Wave Systems.

> DSP Based double conversion topology with enhanced control over the voltage and frequency.

> In-Built requisite safety & protections like Short circuit, over temp, Battery Low/High, etc. With comprehensive display.

> Wide Input Voltage and frequency range.

> Pure Sine Wave Output.

> Generator Compatibility.

> (Remote) Monitoring and Auto Shutdown software.

> Inbuilt Isolation Transformer.

> Extremely Low Total Harmonics distortion ( Web, SNMP & GSM based monitoring (optional).

> Cold Start.

> LCD Display.

> Ability to handle 100% phase imbalance on output while maintaining perfect balance on the input phases.

> Major Power Back up source in corporate offices as well as call centres.

> Banks & ATMs.

> Defence & Para Military operations complex.

>Life saving medical equipments and diagnostic labs.

> Photography and colour labs.

> Emergency Devices (Lights/Alarms).

> Fire Devices.

> Telecommunication Devices.

> Vital real-time & process control equipment in industries.

> Aviation and broadcasting.

Lento offers superior, sophisticated telecom power supply to meet the needs of modern telecom companies. Our design and engineering capabilities come to the forefront in developing telecom power supplies. Todays telecom industries use AC as well as DC power with modern equipments drawing AC while legacy equipments run on DC. This is a challenging environment where the highest reliability is required to assure uninterrupted operations. Lento rises to the challenge and presents its uniquely developed Telecom Power Supplies for this segment.

We offer modular telecom inverters and telecom UPS with an emphasis on 247 operations. In addition our expertise is at your disposal for remote line powering and off grid powering.

> Inverters from 1 KVA to 200 KVA running from 12 V to 60V DC with inbuilt redundances
> Modular UPS with shortest switchover, high reliability and facility for remote monitoring including LAN, SNMP and GSM modules (SNMP technology for total management of telecom power supplies)
> Telecom inverter for upcoming 4G technologies in India.

Concerns over global climatic change, local air pollution and resource scarcity make photovoltaic (PV) and increasingly attractive energy supply technology, the sun being an in-exhaustive, reliable, non-polluting source of power. Using solar energy with LEDs instead of CFL provides a very efficient solution. Solar powered outdoor lighting products are ideal for lighting the area in remote locations where the electricity is unavailable or erratic. Even in urban areas, solar led street lights find great usage to reduce dependency on conventional power and contribute towards green energy. Reliable and long life makes this solution effective in fulfilling our present and future lighting requirements.

Concerns over global climatic change, local air pollution and resource scarcity make photovoltaic (PV) and increasingly attractive energy supply technology, the sun being an in-exhaustive, reliable, non-polluting source of power. Using solar energy with LEDs instead of CFL provides a very efficient solution. Solar powered outdoor lighting products are ideal for lighting the area in remote locations where the electricity is unavailable or erratic. Even in urban areas, solar led street lights find great usage to reduce dependency on conventional power and contribute towards green energy. Reliable and long life makes this solution effective in fulfilling our present and future lighting requirements.

> No line voltage, trenching or metering

> No power outages

> Easy to install

> No maintenance except for the battery

> Better and long life light source LED lights feature while light without flickering and instant on

> Safe 12/24 volt circuit, no risk of electric shock

> Self-contained solution light on/off controlled by automatic daylight sensing

> Auto-dimming function

> Battery backup for cloudy or rainy days

> Automatic dusk dawn operation (Timer optional)

> No running cost.

We are the prominent manufacturers and suppliers of GSM and SNMP Solution Systems based in Delhi. There are some organizations where the USP units are deployed on a massive scale. It thus becomes necessary to evaluate and monitor the performance however manually this process is not possible. Our companies’ innovative use of SNMP and GSM cater to such issues. Our system is capable of remote monitoring of USP via Internet and LAN.

Key features Lento SNMP and GSM solution has advanced state of art features such as :

• Remote monitoring through LAN or WAN networks
• Facility to use multiple screens to evaluate a number of USP or a number of factors
• POP up messages with alarm
• Hibernate facility to save power on all clients connected to LAN
• Self diagnostics and detect problems as well as ability to send notifications through mail
• Password protection Easy to use graphical user interface

Key features of Lento SNMP Manager

• Lento SNMP software is designed to monitor multiple USP units simultaneously and display warning messages in case of any malfunction in any of the units
• It has inbuilt facility for Pop-up messages and warnings for low battery, mains MCB trip, overload and over-temperature
• Monitors all parameters such as UPS ID & IP address, each unit’s input and output voltage and frequency, battery voltage & status, load, output status on battery/mains and communication status
• Data logging for each UPS with time and date for historical analysis purpose
• Protection logging with IP address, date and time
• Options of digital, graph and analog views
• Smart trap finds faults related to variations in output voltage and frequency, temperature, overload and battery status
• Web management tools included to allow remote monitoring of status of each UPS from any location at any time as well as monitor the UPS through WAN static IP address
• Options of digital, graph and analog views

SNMP Add On Solutions

• Lento SNMP solution is developed keeping in mind usage patterns of telecom industry and banks as well as organizations that make use of a large number of UPS.
• SNMP add on solutions save time, money, increase efficiency and assure fail-safe, reliable operations. This is especially recommended for critical environments such as banks and telecom sectors. Our SNMP add on solution includes total turnkey solutions from discussions of your requirements to installation, commissioning, training in use of the system and back up support.
• Our SNMP solutions are modular, scalable and easy to integrate into existing systems or install as a fresh solution. Sitting at the top is the SNMP manager software in a computer system that links to a router to which are attached client computers and SNMP modules connected to UPS systems. The router also interfaces to the internet and allows remote monitoring as well as control of any unit in any location.

Solar Electrical Panels are manufactured under peculiar conditions with some rigorous tests that ensure the rated performance over the rated life. We make use of energy efficient polycrystalline silicon cells coupled with the latest in bonding techniques that facilitate the interconnection of the cells supported by affixing to frames and vacuum sealing. Our company has been ISO 14001:2004, EC 61215 and ISO 9001certified. The panels are UV Resistant courtesy the thermo setting of the plastic. Based in Delhi, we are the major supplier and manufacturer of Solar Electrical Panels.

Salient Features :

• Tempered water white glass plate, extruded aluminium frame for industry standard fitment, vacuum sealing using UV resistant encapsulating resin and EVA sandwich to conform to MNRE and international specifications

• EC 61215, ISO 9001 and ISO 14001:2004 certified

• Polycrystalline cells

• More Energy Efficient

• UV Resistant thermo setting plastic

• Encapsulate ethylene vinyl acetate, cushions the solar cells within the laminate and protects the cell due to harsh weather conditions.

• The high strength polymer sheet protects the rear surface from ingress of moisture and mechanical damage.

MPPT Solar Hybrid System is a next generation smart solar charger that ensures high performance and maximum efficiency. It plays a major role in hybrid as well as the standalone solar power installation. It accentuates the energy efficiency by 30%. The outputs in the SPV modules can differ with changes in weather conditions. Our products have a better durability and longer life. Based in Delhi, we are the leading supplier and manufacturer of MPPT Solar Hybrid System and our system is aimed at achieving high performance and better efficiency. 

Salient Features :

• Microprocessor controls all parameters

• Constant tracking of voltage from SPV modules and automatic optimization to amperes

• Regulation of current drawn by load connected to the batteries

• Prevention of overcharging

• Over temperature, transient over voltage and reverse current flow protection

• Prevents deep discharging of battery

• Reverse terminal protection for SPV terminals and battery terminals

• Short circuit prevention

• MOSFET based MPPT technology, automatically selects 12, 24 or 48 V DC based on SPV input voltage and battery connected to the unit

• Charging current and voltage can be adjusted automatically or manually for Gel, tubular or flooded lead acid batteries

• Constant monitoring of input and output currents and voltages with automatic adjustments

We are the most trusted name in the market and are the key manufacturer and supplier of Customized LED Lights from Delhi, India. We have the ability to design a variety of customized lighting solutions. Our company deals in custom light solutions based on LED, CFL or halogen. We have even supplied the custom lights for some temples, chandeliers, building, architectural monuments, etc. in a range of colorful patterns. It can be used in shop windows to attract the customers. We provide the systems for both the small and large area with apt controllers and fixtures. Use these lights to conserve energy and save on electricity bill.

Our custom light solutions using CFL, LED, halogen or metal halide lighting covers :

Custom lights for lighting up architectural monuments, temples and building facades in interesting, colorful patterns

• Custom lights for shop windows to attract customers
• Custom lights for small or large area lighting with use of appropriate fixtures and controllers
• Custom lights for warehouses, compounds, gardens
• Custom lighting chandeliers using multicolor LEDs to provide sparkle and glitz to interiors

Based in Delhi, we are the most reliable manufacturer and supplier of LED street lights that have been aptly designed to withstand the tough weather conditions in India. They are energy efficient and conserve energy. It is environment friendly and one can avail it in multiple power configurations. Our LED street lights can be used for lighting the streetlights both in rural and urban areas. They can be availed in power ratings of 9W, 15W and 26W standard with 60, 80 and 100W. The lighting intensity is variable from 15 lux to 30 lux.

Features and specifications :

• Specially designed fixture with integral heat sink and controller for the LED array
• Power rating: 9W, 15W and 26W standard with 60, 80 and 100W optional
• Light intensity varies from 15 lux to 30 lux according to power
• Integrated electronic controller

Operating from Delhi, we offer a wide range of Electrical Wires and Cables that conform to IS specifications. Being the leading manufacturer and supplier of Electrical Wires and Cables, we offer different cables for wiring purposes such as multi-core single cable and two- as well as three- wire molded cables. Our company even offers specialist multiple core cables that have been enclosed with single sheathing giving it a nice and neat appearance.

Lento range of wires and cables covers:

• Light duty cableselectrical, flexible, 3 core and multiple core, battery and auto cables
• Power and control cableslow voltage and high voltate power cables and wires
• Communication cablescoaxial, OFC, JFC, telephone, LAN and CCTV cables.