This is the Large 18 Gauge Carbon Steel King Breast Plate Front Chest Plate Cosplay LARP.The front of the chest plate featuresminor fluting and a raised cross design. This piece includes only the front chest plate and is worn with included adjustable genuine leather straps in an X pattern along the back.

Size : 54 cm (M), 60 cm (L), 66 cm

Our Cavalier Plate Armor Bracers go with a large range of medieval ensembles; theyre formed smoothly, hinged and lined with leather including leather straps. Straps on the inner arm adjust so it will fit just about anyone. They feature a smooth steel finish with small studs along the top and bottom edges. These bracers are great for Medieval Fairs, LARP events and most other Re-enactments.

This Steel Warrior Pauldron is sectioned into 6 parts. Each section is riveted to the next and has soft leather. The sections flex smoothly and naturally to allow full range of motion. Each section overlaps the last so the entire armor pauldron protects 100% coverage. A special guard is featured at the top to protect the neck and head from the sides. Thick leather straps allow secure fitment.

Overall Length: 17 InchesWidth: 12 Inches

This impressive neck protector is modeled after a similar piece found in the Wallace Collection, a gathering of historical artifacts including arms and armor. This particular gorget is a stunning recreation with a swiveling plate for variable protection. The layered plating around the collar, neck, and jaw ensure that a warrior will not soon lose their head to anything but the strongest of blows. Curved edges and rivets provide reinforcement, as well as a small influence of gothic design that was prevalent in much 14th, 15th, and 16th century armour. The gorget is worn independently, using a series of leather straps and buckles that secure it around the neck.

This is the Medieval 18 Gauge Steel Type B Elbow Armor with Leather Lining. All joints in the body are critical areas that need protection. It comes with iron buckles and leather straps to hold it against your elbow area.

Specifications:

Length: 4.75

Width: 5

Material: 18 Gauge Mild Steel

This is the Knee Armor Extended Deflectors 18 Gauge Steel. This is armor worn only over the knees and feature heavy duty adjustable black leather straps with one piece construction with leather padding riveted inside of the armor.

Specifications:

Width: 4.5Length: 8.75Material: 18 gauge steel

Solidly constructed from steel and polished to a sleek and pristine look, these greaves are authentic reproductions of the ancient Grecian model that first popularized the trend. Consisting of a single rounded metal plate that protects the front of the leg, the rear is open to allow for greater mobility and range of movement. Adjustable leather straps can tailor the greave to fit any size wearer.

Specifications:Overall Length: 15.5 Inches/ HandcraftedWidth: 7.5 Inches

The plate was worn a leather glove, to the fingers and thumb of which small overlapping scales were attached to complete the defense of the hand. Hourglass gauntlets are considered the zenith of medieval gauntlets. The leather glove helps to protect the hands in many ways and allows the sword wielder to have a solid and firm grip when fighting. Each finger piece has been riveted down and very flexible allowing each finger to fold freely.

This Battle shieldhas a curved shape. It is the classic heater stylebattle shield. White Cross shields are hand-painted and then sprayed with a protective layer of polyurethane to preserve the artwork.

Specifications :

Size : 20 x 28

Available in 18g

Although the existence of buckler is not very well known, it was very widely used in its day. It was a simple yet effective weapon that when combined with a sword, made a swordsman a much more dangerous opponent.Its small size was very useful in deflecting the blow of swords or large fighting knives.This simple round buckler has a wooden handle located in the back.

Dimension: 11x11

The boss was originally designed to deflect blows from the center of round shields, though they also provided a place to mount the shields grip. The Roman Scutum Square Shield Boss is constructed out of 16 gauge mild steel with a natural finish. The square umbo is larger on the sides than your average circular boss so it adds extra protection in the center. Included is mounting rivets and washers.

Specifications:

Overall Length: 9.13 Inches

Overall Width: 9.13 Inches

Dome Diameter: 5.25 Inches

Specifications:

Size: 7 x 5 Inch

Paper: ivory color, 220 pages (counted both sides)

Overall Length:

Spoon: 21 cm
Fork: 17 cm
Knife: 21 cm

A buckle with a universal use featuring spirals (volutes) suitable for an armour, bags, bracers, scabbards etc.

Specifications:

Material: 100% BrassSize: approx. 2.5 x 3.5 cmSuitable for 2 cm wide straps

Replica of Viking belt end with beautiful and elaborate decoration in Borre style. Both based on finds from Birka, Sweden, Viking period.Wealthy Vikings loved to show their social status by wearing precious jewelry, but also by wearing belts with beautiful fittings, like elaborate buckles and strap ends, but often also with many studs. These belt studs are faithful replicas from belt set found in Viking grave in Birka, Sweden.

Dimentions:Belt End : 65mm x 18, 5 mm.

Replica of Viking belt studs in Borre style, based on fids from Birka, Sweden. Made in solid bronze (yellowish shade). All our belt fittings are solid pieces of sterling silver or bronze, these arent thin plates, but a historical Viking adornment built to last.

Wealthy Vikings loved to show their social status by wearing precious jewelry, but also by wearing belts with beautiful fittings, like elaborate buckles and strap ends, but often also with many studs. These belt studs are faithful replicas from belt set found in Viking grave in Birka, Sweden. The whole belt had a number of almost 40 belt studs in two kinds! Original belt find was made in bronze and you can find all elements of this set in bronze too in our shop.

Dimentions:approx. 20mm x 18 mm. Weigth of one stud : approx. 5g.For a belt 2 cm wide.

Real Brass Knuckles, Heavy Duty, with the lettering USA engraved, weighs almost a pound! This thick item is made of solid brass. Has an overall length of 4.5 inches and a height of 2.5 inches. It has a solid and smooth finish. Large holes with a diameter of an inch. Its easy to clean and shines like new. Perfect for self defense. Could also be used as an interesting paper weight.

Weighs in at 15 ouncesLength: 4.5Height: 2.5

A large, often flat topped and cylindrical helmet popularized during the era of the Crusades. The helmet completely enclosed the head and could be worn over a chain coif as well as iron or steel skull caps. The far superior protection that the great helmet provides over other forms of head wear comes at a cost.

The very narrow openings for the eyes creates a very restricted field of vision for the wearer, mostly eliminating peripheral vision.

Specifications:

It is made of hand-forged 16 gauge. Can be made in 18 gauge on request.

The Helmet comes with a Riveted High-Quality and adjustable Fake Leather Liner with Chinstrap and authentic Buckle.

Forehead Circumference: Available in 70 cm.

This opener is designed with the head of a duck including the beautiful beak with extraordinary details and a standard bottle opener at the back end of the head.

Total Length : 5.75 Inches

This is the Large 18 Gauge Carbon Steel King Breast Plate Front Chest Plate Cosplay LARP.The front of the chest plate featuresminor fluting and a raised cross design. This piece includes only the front chest plate and is worn with included adjustable genuine leather straps in an X pattern along the back.

Size : 54 cm (M), 60 cm (L), 66 cm

Our Cavalier Plate Armor Bracers go with a large range of medieval ensembles; theyre formed smoothly, hinged and lined with leather including leather straps. Straps on the inner arm adjust so it will fit just about anyone. They feature a smooth steel finish with small studs along the top and bottom edges. These bracers are great for Medieval Fairs, LARP events and most other Re-enactments.

This Steel Warrior Pauldron is sectioned into 6 parts. Each section is riveted to the next and has soft leather. The sections flex smoothly and naturally to allow full range of motion. Each section overlaps the last so the entire armor pauldron protects 100% coverage. A special guard is featured at the top to protect the neck and head from the sides. Thick leather straps allow secure fitment.

Overall Length: 17 InchesWidth: 12 Inches

This impressive neck protector is modeled after a similar piece found in the Wallace Collection, a gathering of historical artifacts including arms and armor. This particular gorget is a stunning recreation with a swiveling plate for variable protection. The layered plating around the collar, neck, and jaw ensure that a warrior will not soon lose their head to anything but the strongest of blows. Curved edges and rivets provide reinforcement, as well as a small influence of gothic design that was prevalent in much 14th, 15th, and 16th century armour. The gorget is worn independently, using a series of leather straps and buckles that secure it around the neck.

This is the Medieval 18 Gauge Steel Type B Elbow Armor with Leather Lining. All joints in the body are critical areas that need protection. It comes with iron buckles and leather straps to hold it against your elbow area.

Specifications:

Length: 4.75

Width: 5

Material: 18 Gauge Mild Steel

This is the Knee Armor Extended Deflectors 18 Gauge Steel. This is armor worn only over the knees and feature heavy duty adjustable black leather straps with one piece construction with leather padding riveted inside of the armor.

Specifications:

Width: 4.5Length: 8.75Material: 18 gauge steel

Solidly constructed from steel and polished to a sleek and pristine look, these greaves are authentic reproductions of the ancient Grecian model that first popularized the trend. Consisting of a single rounded metal plate that protects the front of the leg, the rear is open to allow for greater mobility and range of movement. Adjustable leather straps can tailor the greave to fit any size wearer.

Specifications:Overall Length: 15.5 Inches/ HandcraftedWidth: 7.5 Inches

The plate was worn a leather glove, to the fingers and thumb of which small overlapping scales were attached to complete the defense of the hand. Hourglass gauntlets are considered the zenith of medieval gauntlets. The leather glove helps to protect the hands in many ways and allows the sword wielder to have a solid and firm grip when fighting. Each finger piece has been riveted down and very flexible allowing each finger to fold freely.

This Battle shieldhas a curved shape. It is the classic heater stylebattle shield. White Cross shields are hand-painted and then sprayed with a protective layer of polyurethane to preserve the artwork.

Specifications :

Size : 20 x 28

Available in 18g

Although the existence of buckler is not very well known, it was very widely used in its day. It was a simple yet effective weapon that when combined with a sword, made a swordsman a much more dangerous opponent.Its small size was very useful in deflecting the blow of swords or large fighting knives.This simple round buckler has a wooden handle located in the back.

Dimension: 11x11

The boss was originally designed to deflect blows from the center of round shields, though they also provided a place to mount the shields grip. The Roman Scutum Square Shield Boss is constructed out of 16 gauge mild steel with a natural finish. The square umbo is larger on the sides than your average circular boss so it adds extra protection in the center. Included is mounting rivets and washers.

Specifications:

Overall Length: 9.13 Inches

Overall Width: 9.13 Inches

Dome Diameter: 5.25 Inches

Specifications:

Size: 7 x 5 Inch

Paper: ivory color, 220 pages (counted both sides)

Overall Length:

Spoon: 21 cm
Fork: 17 cm
Knife: 21 cm

A buckle with a universal use featuring spirals (volutes) suitable for an armour, bags, bracers, scabbards etc.

Specifications:

Material: 100% BrassSize: approx. 2.5 x 3.5 cmSuitable for 2 cm wide straps

Replica of Viking belt end with beautiful and elaborate decoration in Borre style. Both based on finds from Birka, Sweden, Viking period.Wealthy Vikings loved to show their social status by wearing precious jewelry, but also by wearing belts with beautiful fittings, like elaborate buckles and strap ends, but often also with many studs. These belt studs are faithful replicas from belt set found in Viking grave in Birka, Sweden.

Dimentions:Belt End : 65mm x 18, 5 mm.

Replica of Viking belt studs in Borre style, based on fids from Birka, Sweden. Made in solid bronze (yellowish shade). All our belt fittings are solid pieces of sterling silver or bronze, these arent thin plates, but a historical Viking adornment built to last.

Wealthy Vikings loved to show their social status by wearing precious jewelry, but also by wearing belts with beautiful fittings, like elaborate buckles and strap ends, but often also with many studs. These belt studs are faithful replicas from belt set found in Viking grave in Birka, Sweden. The whole belt had a number of almost 40 belt studs in two kinds! Original belt find was made in bronze and you can find all elements of this set in bronze too in our shop.

Dimentions:approx. 20mm x 18 mm. Weigth of one stud : approx. 5g.For a belt 2 cm wide.

Real Brass Knuckles, Heavy Duty, with the lettering USA engraved, weighs almost a pound! This thick item is made of solid brass. Has an overall length of 4.5 inches and a height of 2.5 inches. It has a solid and smooth finish. Large holes with a diameter of an inch. Its easy to clean and shines like new. Perfect for self defense. Could also be used as an interesting paper weight.

Weighs in at 15 ouncesLength: 4.5Height: 2.5

A large, often flat topped and cylindrical helmet popularized during the era of the Crusades. The helmet completely enclosed the head and could be worn over a chain coif as well as iron or steel skull caps. The far superior protection that the great helmet provides over other forms of head wear comes at a cost.

The very narrow openings for the eyes creates a very restricted field of vision for the wearer, mostly eliminating peripheral vision.

Specifications:

It is made of hand-forged 16 gauge. Can be made in 18 gauge on request.

The Helmet comes with a Riveted High-Quality and adjustable Fake Leather Liner with Chinstrap and authentic Buckle.

Forehead Circumference: Available in 70 cm.

This opener is designed with the head of a duck including the beautiful beak with extraordinary details and a standard bottle opener at the back end of the head.

Total Length : 5.75 Inches