KUNTAI MACHINERY CO.,LTD

Sushant Lok, Gurugram, Haryana

Automatic Edge Fabric Inspecting Machine and Length Measurement Usage and Characteristics 1.This inspecting machine is applied for inspection of various knitted and woven fabric, rolling fabric, measure length and yardage of fabric.

Full automatic circle cutting machine Use and characteristics A) Usage and Features 1.This machine is mainly consisted of linear bearing slide rail, large cutter, knife grinder, oilstone.

Film cutting machine Range of Application Hydraulic Cutting Machine is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widly used in many industries, such as: Automotive interior Abrasives, abrasive paper

Abrasive paper travel head cutting machine Usage and Characteristics 1. Th is type of cutting machine s are widely used for cutting applications of nonmetal materials . S uch products as artificial flower, insoles, football, volleyball or tennis panels, car interior decoration materials and.

UsageandCharacteristics

1.Thistypeofcuttingmachinesarewidely usedforcutting applications ofnonmetalmaterials.Suchproductsas artificial flower, insoles, football, volleyball or tennis panels, car interior decoration materials andmedical supplies are made by this machine.

2. Various material feeding systems can be installed with the machine.Servomotormakesaccuratefeedingpossibleandcontrolshorizontalmovementofthecuttinghead.

3.Thefeedinglengthcanbeeasily setbythehuman-computerinterface or PLC control panel (Optional).

4.Special hydraulic system makes low noise possible and saves oil.

5. High quality and imported oil pump and other parts are available on request.

6. Maximum cuttingforce of the die cutting machine caters to customers specific application requirements.

7. Rotary head can be installed on request.

Insole travel head cutting machine Features 1 . Scope of application: This cutting press machine is applicable to continuous cutting operation of nonmetal rolled materials of same specifications and large batches by die cutter. For example: used in such industries as football, volleyball, tennis.

Features

1.Scope of application: This cutting press machineis applicable to continuous cutting operation of nonmetal rolled materials of same specifications and large batches by die cutter. For example: used in such industries as football, volleyball, tennis and medicine etc.

2.Servo moto:The servo motor is adopted to control the horizontal movement of cutting head, and the multilayer materials are clamped by the cylinder for stepping feeding.

3.Feeding and layering length of multilayer materials:The machine can automatically complete the cutting of materials and the displacement distance of cutting head and feeding length can be accurately set, which has solved the problem of inaccurate feeding and layering length of multilayer materials.

3.Various working modes:The machine has various working modes such as inching, manual and automatic, etc. modes. The workers need only to pick up the finished materials, with labor intensity reduced and work efficiency enhanced.

4.Conivenient:Easyoperation, with special setting mechanism, in conjunction with die cutter andcutting depth setting, thetravelling adjustment is simple and acurate

5.High precise:The pressing board of cutting carries out slow cutting when it contacts the die cutter, which can make that there is no size error between the uppermost layer andlowermost layer of cut materials

6.Save material:The machine has cutting modes of stagger, stagger blade reducing and die cutter rotation etc. which can save 10%15% of raw materials.

7.High efficieny and save working time:As the machine is controlled by microcomputer with high automation degree, only one worker is required for the whole machine, so that the production efficiency can be enhanced for 3-5 times and the power can be almost 1/3 saved.

8.With special setting mechanism, and in conjunction with die cutter and cutting depth setting, the travel adjustment is simple and accurate.

9.Products of special specifications can be customized.Optional: cutting board micro-movement device.

10.High quality, efficiencyandreliability

11.Long working life

12.For cutting special materials can be customized

CNC travel head cutting machine Range of Application This CNC travel head Cutting Machine is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter.

Range of ApplicationThis CNC travel head Cutting Machine is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widly used in many industries, such as:Automotive interiorAbrasives, abrasive paperLeather and leathergoodsshoe uppers, wallets, purses, beltsClothingcomponents for hats, ties, collars, shoulder padsCork gaskets and matsFoam and spongeFootwear componentsshoes, insoles, insole socks, uppers, strapsRubbergaskets, seals, washersTextilessample swatches and pattern books, underwear and outerwear components, hats, tiesToyssoft toys, advertising novelties, mini jig-saw puzzles, etc.

Features of Travel Head Cutting Press Machine1.These CNC cutting, press machines are suitable for continuous cutting operation of nonmetal materials. The finished materials are widely used for such products as abrasive, abrasive paper, shoes, sports materials, car interior materials and medical supplies.2.Servo motor makes accurate feeding possible and controls horizontal movement and rotation of the cutting head. Multilayers of sheet materials can be cut by Sliding table feeding. Other feeding methods are also available on request.3.The distance of cutting head and feeding length can be accurately set, which has solved the problem of inaccurate feeding and layering length of multilayer materials.4.The die cutting machine has various working modes such as inching, manual and automatic etc. The workers need only to pick up the products, with labor intensity reduced and work efficiency enhanced.5.Special hydraulic system makes low noise possible and saves oil. High quality and imported oil pump and other parts are available on request.6.As the machine is controlled by.computer with automatic nesting system, to make the full use of the material, save the labor. The production efficiency can be enhanced for 3-5 times and the power can be almost 1/3 saved.7.Travel Head Cutting Machine of special specifications can be customized.

Reference Technical Data (Customizable)

Model	KT-C
Maximum Cutting Force (ton)	25	25	25	50	50	50
Working Table (mm)	1800*500	2000*500	2200*500	1800*550	2000*550	2200*550
Travel Head Size (mm)	500*500	500*500	500*500	550*550	550*550	550*550
Adjustable Stroke (mm)	5-150	5-150	5-150	5-150	5-150	5-150
Motor Power (kw)	2.2	2.2	2.2	4.0	4.0	4.0
Estimated Machine Dimension (mm)	2200*620*2000	2400*620*2000	2600*620*2000	2200*620*2000	2400*620*2000	2600*620*2000
Estimated G.W (kg)	2300	2800	3500	3500	4200	5000

OptionRotary headMachine ColorServo MotorImported oil pumpRoll Holding Gantries

Sheet material travel Head Cutting Machine Range of Application This travel head cutting machine is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widly used in many industries, such as: Automotive interior Abrasives, abrasive paper L.

Range of Application

This travel head cuttingmachine is mainly suitable for die cutting single or multiple layers ofnonmetal rolledmaterials by die cutter. It is widly used in many industries, such as:

• Automotive interior

• Abrasives, abrasive paper

• Leather and leathergoods shoe uppers, wallets, purses, belts

• Clothing components for hats, ties, collars, shoulder pads

• Cork gaskets and mats

• Foam and sponge

• Footwear components shoes, insoles, insole socks, uppers, straps

• Rubber gaskets, seals, washers

• Textiles sample swatches and pattern books, underwear and outerwear components, hats, ties

• Toys soft toys, advertising novelties, mini jig-saw puzzles, etc.
  

Features of Automatic FoamCutting Machine

1.These automatic foamcuttingmachinesaresuitableforcontinuouscuttingoperationofnonmetalmaterials.Thefinishedmaterialsarewidelyusedforsuchproductsas abrasive, abrasive paper, shoes, sports materials, car interior materials andmedical supplies.

2.Servomotormakesaccuratefeedingpossibleandcontrolshorizontalmovementandrotationofthecuttinghead.Multilayersofmaterialscan be clampedbythecylinderforsteppingfeeding. Other feeding methods are also available on request.

3. The distance of cutting head andfeedinglengthcanbeaccurately set, which has solved the problem of inaccurate feeding and layering length of multilayer materials.

4. The die cutting presshas various working modes such as inching, manual and automatic etc. The workers need only to pick up the products, with labor intensity reduced and work efficiency enhanced.

5.Special hydraulic system makes low noise possible and saves oil.High quality and imported oil pump and other parts are available on request.

6.Asthemachineiscontrolledby.PLCwithhighautomationdegree, onlyoneworkerisrequiredforthewholemachine, so that the production efficiency can be enhanced for 3-5 times and the power can be almost 1/3 saved.

7. Cutting board micro-movement device is adopted to prolong the service life of the cutting board.

8. Products of special specifications can be customized.

ReferenceTechnicalData(Customizable)

Model	KT-C
MaximumCuttingForce(ton)	25	25	25	50	50	50
WorkingTable(mm)	1800*500	2000*500	2200*500	1800*550	2000*550	2200*550
TravelHeadSize(mm)	500*500	500*500	500*500	550*550	550*550	550*550
AdjustableStroke(mm)	5-150	5-150	5-150	5-150	5-150	5-150
MotorPower (kw)	2.2	2.2	2.2	4.0	4.0	4.0
EstimatedMachineDimension(mm)	2200*620*2000	2400*620*2000	2600*620*2000	2200*620*2000	2400*620*2000	2600*620*2000
EstimatedG.W (kg)	2300	2800	3500	3500	4200	5000

Gantry frame structure made of profile steel is adopted, with high intensity and without deformation, The cutting head can automatically move horizontally, with excellent operating visual field and safe operation, Differential oil way is adopted to allow rapid and convenient cutting, The special design of the hydraulic system, the machine is lubricated automatically during operation. This design can reduce abrasion and ensure machine service life, The lifting position of pressing board can be freely set to reduce idle travel and enhance work efficiency.

High Quality Foam Insert Cutting Machine Application This kind of Automatic D ie Cutting Press Machine is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widly used in many industries, such as: Automotive interior Sheet material.

Application

This kind of Automatic Die Cutting Press Machineis mainly suitable for die cutting single or multiple layers ofnonmetal rolledmaterials by die cutter. It is widly used in many industries, such as:

• Automotive interior

• Sheet material industry supplies
  

• Floor mats
  

• Abrasives, abrasive paper/sand paper.

• Leather and leathergoods shoe uppers, wallets, purses, belts
  

• Lampshades fabric or plastic, with or without cut outs

• Garment components for hats, ties, collars, shoulder pads

• Cork gaskets and mats

• Filters for machinery, breathing apparatus and the medical industry

• Foam and sponge gaskets, packaging, consumer products

• Footwear components shoes, insoles, insole socks, uppers, straps

• Plastics PVC binders, lampshades, stationery products, gifts, novelties, gaskets

• Rubber gaskets, seals, washers

• Textiles sample swatches and pattern books, underwear and outerwear components, hats, ties

• Toys soft toys, advertising novelties, mini jig-saw puzzles, etc.

New Hydraulic Sponge Cutting Machine Use and characteristics 1. The sponge cutting machine is mainly suitable for cutting various nonmetal materials, s uch as sponge , Clothing Leather Material, Pu Clothing Material, rubber, plastic, foam and so on. It is widely used in toy industry, footwear.

Use and characteristics

1. The sponge cutting machine is mainly suitable for cutting variousnonmetal materials, such as sponge , Clothing Leather Material, Pu Clothing Material, rubber, plastic, foam and so on. It is widely used in toy industry, footwear industry, leather industry, etc.

2.Adopt double oil cylinder, precise double crank connecting rod mechanism, which can guarantee that the cutting depth at every cutting position is same.

3.It can suppot single-side or double-side automatic feed attachment and raise the working efficient of the whole machine by two or three time.

4. The pressing board of cutting carries out slow cutting when it contacts the die cutter, which can make that there is no size error between the uppermost layer and lowermost layer of cut materials

5.With special setting mechanism, and in conjunction with die cutter and cutting depth setting, the travel adjustment is simple and accurate.

6.Center automatic lubrication system can quarantee the precision and can raise abrasive resisitance.

7. Sponge cutting press of special specifications can be customized.

MainTechnicalData(Customizable) of Toy Cutting Machine

Model	XCLP3-C
Maximum cutting force	30T	35T	400T	500T	600T	800T	1000T
Working table(mm)	1600*500	1600*610	1600*610	1600*800	1600*800	1600*900	1600*900
Main motor power(kw)	1.5	3	3	4	5.5	7.5	7.5
Machine weight(kg)	1600	2300	1600	3200	4200	4600	7000

Machine Advantage:

1. Safe, two-hand trip operation, easy to operation.

2. The main machine adopts double oil cylinder, double-crank connecting rod balance, four-columns, which can guarantee the cutting depth at every cutting position is the same.

3. The pressing board carries out slow cutting when it presses down to contact the die cutter, which can make that there is no size error between the uppermost layer and lowmost layer of cut material.

4. Single-side or double side auto feeding system for choosing, which can improve the producting capacity.

5. The central oil supply automatic lubricating system guarantees machine precision and prolongs service life of machine.

foam hydraulic beam cutting machine Usage and characteristics 1. The die cutting machine is mainly suitable for cutting various nonmetal materials, s uch as sponge , Clothing Leather Material, Pu Clothing Material, rubber, plastic, foam and so on. It is widely used in toy industry, footwear.

Usage and characteristics

1. The die cutting machine is mainly suitable for cutting variousnonmetal materials, such as sponge , Clothing Leather Material, Pu Clothing Material, rubber, plastic, foam and so on. It is widely used in toy industry, footwear industry, leather industry, etc.

2.Adopt double oil cylinder, precise double crank connecting rod mechanism, which can guarantee that the cutting depth at every cutting position is same.

3.It can suppot single-side or double-side automatic feed attachment and raise the working efficient of the whole machine by two or three times.

4. The pressing board of cutting carries out slow cutting when it contacts the die cutter/cutting mould, which can make that there is no size error between the uppermost layer and lowermost layer of cut materials.

5.With special setting mechanism, and in conjunction with die cutter and cutting depth setting, the travel adjustment is simple and accurate.

6. Center automatic lubrication system can quarantee the precision and can raise abrasive resisitance.

7. Sponge cutting press of special specifications can be customized.

MainTechnicalData(Customizable) of Die Cutting Machine

Model	XCLP3-C
Maximum cutting force	30T	35T	400T	500T	600T	800T	1000T
Working table(mm)	1600*500	1600*610	1600*610	1600*800	1600*800	1600*900	1600*900
Main motor power(kw)	1.5	3	3	4	5.5	7.5	7.5
Machine weight(kg)	1600	2300	1600	3200	4200	4600	7000

Machine Advantage:

1. Safe, two-hand trip operation, easy to operation.

2. The main machine adopts double oil cylinder, double-crank connecting rod balance, four-columns, which can guarantee the cutting depth at every cutting position is the same.

3. The pressing board carries out slow cutting when it presses down to contact the die cutter, which can make that there is no size error between the uppermost layer and lowmost layer of cut material.

4. Single-side or double side auto feeding system for choosing, which can improve the producting capacity.

5. The central oil supply automatic lubricating system guarantees machine precision and prolongs service life of machine.

Insole automatic die cutting machine Range of Application This travel head cutting machine is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widly used in many industries, such as: Automotive interior Abrasives, abrasive paper L eather.

Range of Application

This travel head cuttingmachine is mainly suitable for die cutting single or multiple layers ofnonmetal rolledmaterials by die cutter. It is widly used in many industries, such as:

• Automotive interior

• Abrasives, abrasive paper

• Leather and leathergoods shoe uppers, wallets, purses, belts

• Clothing components for hats, ties, collars, shoulder pads

• Cork gaskets and mats

• Foam and sponge

• Footwear components shoes, insoles, insole socks, uppers, straps

• Rubber gaskets, seals, washers

• Textiles sample swatches and pattern books, underwear and outerwear components, hats, ties

• Toys soft toys, advertising novelties, mini jig-saw puzzles, etc.
  

Features of Insole Automatic Cutting Machine

1.Thesediecuttingmachinesaresuitableforcontinuouscuttingoperationofnonmetalmaterials.Thefinishedmaterialsarewidelyusedforsuchproductsas abrasive, abrasive paper, shoes, sports materials, car interior materials andmedical supplies.

2.Servomotormakesaccuratefeedingpossibleandcontrolshorizontalmovementandrotationofthecuttinghead.Multilayersofmaterialscan be clampedbythecylinderforsteppingfeeding. Other feeding methods are also available on request.

3. The distance of cutting head andfeedinglengthcanbeaccurately set, which has solved the problem of inaccurate feeding and layering length of multilayer materials.

4. The die cutting presshas various working modes such as inching, manual and automatic etc. The workers need only to pick up the products, with labor intensity reduced and work efficiency enhanced.

5.Special hydraulic system makes low noise possible and saves oil.High quality and imported oil pump and other parts are available on request.

6.Asthemachineiscontrolledby.PLCwithhighautomationdegree, onlyoneworkerisrequiredforthewholemachine, so that the production efficiency can be enhanced for 3-5 times and the power can be almost 1/3 saved.

7. Cutting board micro-movement device is adopted to prolong the service life of the cutting board.

8. Products of special specifications can be customized.

ReferenceTechnicalData(Customizable)

Model	KT-C
MaximumCuttingForce(ton)	25	25	25	50	50	50
WorkingTable(mm)	1800*500	2000*500	2200*500	1800*550	2000*550	2200*550
TravelHeadSize(mm)	500*500	500*500	500*500	550*550	550*550	550*550
AdjustableStroke(mm)	5-150	5-150	5-150	5-150	5-150	5-150
MotorPower (kw)	2.2	2.2	2.2	4.0	4.0	4.0
EstimatedMachineDimension(mm)	2200*620*2000	2400*620*2000	2600*620*2000	2200*620*2000	2400*620*2000	2600*620*2000
EstimatedG.W (kg)	2300	2800	3500	3500	4200	5000

Option

• Rotary head
  

• Machine Color

• Servo Motor

• Imported oil pump
  

• Roll Holding Gantries

• Bed Size

Hydraulic abrasive paper die cutting machine Range of Application This hydraulic press machine is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widly used in many industries, such as: Automotive interior Abrasives, abrasive paper L.

Range of Application

This hydraulicpress machine is mainly suitable for die cutting single or multiple layers ofnonmetal rolledmaterials by die cutter. It is widly used in many industries, such as:

• Automotive interior

• Abrasives, abrasive paper

• Leather and leathergoods shoe uppers, wallets, purses, belts

Features of Insole Automatic Cutting Machine

1.Thesediecuttingmachinesaresuitableforcontinuouscuttingoperationofnonmetalmaterials.Thefinishedmaterialsarewidelyusedforsuchproductsas abrasive, abrasive paper, shoes, sports materials, car interior materials andmedical supplies.

2.Servomotormakesaccuratefeedingpossibleandcontrolshorizontalmovementandrotationofthecuttinghead.Multilayersofmaterialscan be clampedbythecylinderforsteppingfeeding. Other feeding methods are also available on request.

3. The distance of cutting head andfeedinglengthcanbeaccurately set, which has solved the problem of inaccurate feeding and layering length of multilayer materials.

4. The die cutting presshas various working modes such as inching, manual and automatic etc. The workers need only to pick up the products, with labor intensity reduced and work efficiency enhanced.

5.Special hydraulic system makes low noise possible and saves oil.High quality and imported oil pump and other parts are available on request.

6.Asthemachineiscontrolledby.PLCwithhighautomationdegree, onlyoneworkerisrequiredforthewholemachine, so that the production efficiency can be enhanced for 3-5 times and the power can be almost 1/3 saved.

Popular shoes hydraulic beam cutting machine Product Description 1. This type of cutting machine provides workers with simple, prompt and precise operation. 2. The machine body adopts double oil cylinder, double-crank connecting rod balancing and four-column precise guiding mechanism. 3. High.

Product Description

1. This type of cutting machine provides workers with simple, prompt and precise operation.

2.The machine body adopts double oil cylinder, double-crank connecting rod balancing andfour-column precise guiding mechanism.

3. Highspeedandlowenergyconsumption.

4.Thecentral oil supply automatic lubricating systemprolongs the machine service lifeand guarantees cutting precision.

5.Cutting board micro-movement devicecan be installed to reduce wear.

6.Die cutter pneumatic clamp devicecan be installed to make the replacement ofdie cutter convenient and prompt.

7.Various automatic materials feeding systems, such as double or single side sliding board or conveyor belt feeding system and so oncan be installed on the machine as per customers' request.

8. Imported pump, valve, sealings, press and cutting switches and other accessories can be available on request.

Travel Head Hydraulic Cutting Machine The machine is applicable to continuous cutting operation of nonmetal rolled material of same specifications and large batches by die cutter. For example: used in such industries as football, volleyball, tennis, etc. Main Technical Data( Customizable ).

Hydraulic Swing arm cutting machine Usage and Characteristics 1.The swing arm cutting machine is applicable to cutting of various nonmetal materials( such as leather, fabric, foam, EVA, rubber gasket, plastic etc) by cutting die.

Usage and Characteristics1.The swing arm cutting machine is applicable to cutting of various nonmetal materials( such as leather, fabric, foam, EVA, rubber gasket, plastic etc) by cutting die.2.Application: it can be used for cutting gasket, shoes, gloves, balls, bags, sand paper, carpet, toys industries etc.3.Safe , two-hand trip operation, rocker cutting head rotates freely, the best sight in operation, convenience in choosing materials with high efficiency.4.The oil way system specially designed can conveniently adjust the rocker height. No adjustment is needed after the height of die cutter is changed.5.High speed, low energy consumption, less failure and easy maintenance.6.To meet the need of frequent replacement of die cutters of different sizes, this type of clicking machine that can timely output three kinds of cutting force is available for selection. 7.Ductile cast iron body made the cutting machine be used for a very long time with small noise.8.CE certified quality with competitive price in kuntai high quality level.9.Cutting machineof special specifications can be customized.

Main Technical Data(Customizable)

Model	XCLB3-220	XCLB3-270
Cutting Force	22T	27T
Sway Arm Width	370mm	370mm, 480mm, 610mm
Table Area	900X420mm	1000X 500mm
Stroke speed	0.10m/s	0.10m/s
Cutting travel	90 mm	90 mm
main motor power	1.1kw	1.5kw

Automatic Hydraulic Cutting Machine for sheet material Key Features: 1. Suitable for single-layer or multi-layer sheet or roll materials. Laser Cutting Machines 2. Stroke adjustment device, makes stroke simple and correct to adjust with cutting die, cutting board and materials. 3. Auto-balance.

Automatic Hydraulic Cutting Machine for sheet material

Key Features:

1.Suitable for single-layer or multi-layer sheet or roll materials.Laser Cutting Machines

2.Stroke adjustment device, makes stroke simple and correct to adjust with cutting die, cutting board and materials.

3.Auto-balance structure of double-cylinder, four-column and selfbalance connecting rod, makes sure equal pressure in any working area.

4.Machines of special specifications can be available on request

Application:

This cutting machine is used for cutting nonmetal materials such as fabric sample, facial mask, cloth, textile crafts, foam, sponge, EVA, rubber, plastic and so on.

Full automatic circle cutting machine Use and characteristics A) Usage and Features 1.This machine is mainly consisted of linear bearing slide rail, large cutter, knife grinder, oilstone.As one of the professional manufacturers in China, Kuntai Machinery is also a leading supplier of circle cutting machine. Providing you with 24 hours service and free installation training service, we warmly welcome you to buy our high quality circle cutting machine with high precision at competitive price.

Insole automatic die cutting machine Range of Application This travel head cutting machine is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widly used in many industries, such as: Automotive interior Abrasives, abrasive paper L eather.

Sofa Fabric Foil Transfer Bronzing Machine Application & Features The bronzing machine is suitable for bronzing, printing of fabric, plastic-skin, PU, PVC, cotton-hemp, silk, knitting etc. or colour changing of fabric, leather, PU, .

Automatic Beam cutting press Range of Application This beam cutting press is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter.This beam cutting press is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widely used in many industries, such as:

Manual travel head cutting machine Range of Application it is mainly suitable for die cutting single or multiple layers of nonmetal rolled materials by die cutter. It is widly used in many industries, such as: Abrasives, abrasive paper