GST : 06BGTPS9825H1ZK
Write a Review
Our Products
Industrial Chemicals
1 Products availableCoal & Charcoal
1 Products availableIron & Iron Products
1 Products availableEarthing Electrodes
1 Products availableManhole Covers
1 Products availableBandages
1 Products availableFuses, Circuit Breakers & Components
1 Products availableWe are leaders in the market for providing best range of Chemical Earthing
To meet the precise needs of our customers, we offer the best quality of Conventional Lightning Arrester to our esteemed customers. Designed as per the industry laid norms, the offered conventional lightning arrester is used to protect buildings or human life from damage caused by lighting strike. Owing to its adequate galvanization and highly electrical conductivity, the offered conventional lightning arrester is highly demanded.
Features:
Free from maintenanceExcellent earthing stabilityMaintains low resistance for a very long period
Specifications:
Solid Cu/gi Air Terminal Lightning Protection Spike Of 300mm Long, 25 Mm Dia Should Be Internally Assembled With 100 Mm Dia Copper Ball Fitted With Side Flash Protection Spikes With The Air Gap Technology.The Entair System Should Be Fixed With 2000 Mm Long Isolated Fiberglass-reinforced Plastic (frp) Mast.The Isolated Down conductor Internally Connects To The Air Terminal Inside The Frp. The Frp Mast Has Natural Isolation Properties, High Strength For Windy Sites And Low Weight To Minimize Mast Loading.Sizes:Single Spike To Five Spikes
Additional Information:
Payment Terms : L/C, D/A, D/P
Packaging Details : With Packing
Delivery Time : Immediate
Four types of LPS Maintenance Free Chemical Electrodes are manufactured by us:
Additional Information:
Payment Terms : L/C, D/P, T/T, Western Union,
Packaging Details : Picking
Delivery Time : Immediately
Salient Features of Copper Bonded Grounding Rod are as follows:
Perfectly bonded Copper Bonded Grounding Rod is long lasting, drive easier and will not crack.In Copper Bonded Rod Copper Coating should comes in the range of 100, 180 & 250 Microns respectively.In Copper Bonded Grounding Rod Clad, Copper purity is 99.95%.The Copper Bonded Grounding Rod is fuly covered with copper cladding without any cracks, holes, cavities etc.Magnetic conducting rate is low. Thus reducing the lightning induction.Good tensile strength in Copper Bonded Grounding Rod, over 600N/mm2.Resist corosion better than galvanized rods alowing for a 28-year service life in most soils.
Dimensions:
(14.2 x 2000) mm(14.2 x 3000) mm(17.2 x 2000) mm(17.2 x 3000) mm
Additional Information:
Payment Terms : L/C, D/A, D/P,
Packaging Details : Separately
Delivery Time : Immediate
With our decade of experience, we are catering to the varied requirements of our clients by introducing quality array of Industrial Copper Strip. This copper strip is manufactured using supreme class raw material and cutting edge technology at par with international standards. Our copper strip is used in automotive and electric industries. In addition, we offer this copper strip in different thickness & dimensions as per the needs of the customers.
Features:
Excellent Dimensional control for superior contacts
Current carrying capacity
Easy to install
Other Details:
Current Carrying Capacity
Excellent Dimensional control for superior contacts
Higher Conductivity
Engineered for durability
Customer specification solutions
Wide Range of sizes
Long Lasting and maintenance free
Low Contact Resistance
Corrosion Resistance
Applications:
Electrical Industries
Electroplating plants
Motors
Generators
Transformers
Household Electrical Appliances
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : Self Fold
Delivery Time : Within 2-3 days
Copper Bonded Clad Rod Salient Features of Copper Bonded Grounding Rod are as follows: Perfectly bonded Copper Bonded Grounding Rod is long lasting, drive easier and will not crack. In Copper Bonded Rod Copper Coating should comes in the range of 100, 180 & 250 Microns respectively. In Copper Bonded Grounding Rod Clad, Copper purity is 99.95%. The Copper Bonded Grounding Rod is fuly covered with copper cladding without any cracks, holes, cavities etc. Magnetic conducting rate is low. Thus reducing the lightning induction. Good tensile strength in Copper Bonded Grounding Rod, over 600N/mm2. Resist corosion better than galvanized rods alowing for a 28-year service life in most soils Dimensions: (14.2x 2000) mm (14.2x 3000) mm (17.2x 2000) mm (17.2x 3000) mm
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Delivery Time : Ex-Stock
Copper Bonded Earthing RodsLaxmi Power Solutions is a leading supplier of Copper Bonded Earthing Rods. Our manufacturing process adheres to all parameters as prescribed by IS: 3043-1987 as well as UL. Copper Bonded Earthing Rods are sturdy, have longer shell life and efficient in dissipating fault current compared to plates or pipes.Copper Bonded Earthing Rods supplied by Sarvayogam Corp are available in following dimensions
Standard Length:2 Meter, 3 Meter, Can be customized in terms of length as per requirement of project
Standard Copper coating thickness:100 Microns, 250 Microns
Base Material:Low Carbon steel rod of high tensile strength
Thickness:
1. 14 MM2. 16 MM3. 19 MM4. 25 MM5. 32 MM6. 38 MM
Copper Bonded Earthing Rodshave the capabilities to be deep driven into the soil. This is helpful in difficult terrains and rocky terrains where the normal resistivity of the soil is high and it becomes difficult to achieve lower resistances.
As per IS 3043: 1987, one can achieve lower resistivity at depths at greater depths. Often these levels are some meters below the surface. The most economical way of reaching them is by Deep Driven Earth Rod Electrodes. When deep driving is not possible mainly due to rocks, underneath, parallel driven shorter rods, plates, mates or buried conductors or a combination of three can be used.
Earth Rod Electrodes:
Earth rods are commonly made from solid copper or stainless steel with copper bonding. Copper Bonded Earthing Rods or Copper Bonded Grounding Rods are commonly used due to strength, corrosion resistance and comparatively low cost
Cast iron plate of size 600 mm x600 mm x12 mm OR
Galvanized iron plate of size 600 mm x600 mm x6 mm OR
Copper plate of size 600 mm * 600 mm * 3.15 mm
Plate is burred at the depth of 8 feet in the vertical position and GI strip of size 50 mmx6 mm bolted with the plate is brought up to the ground level.
These types of earth pits are generally filled with alternate layer of charcoal & salt up to 4 feet from the bottom of the pit.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : As per customizable
Delivery Time : Immediate
GI pipe [C-class] of 75 mm diameter, 10 feet long is welded with 75 mm diameter GI flange having 6 numbers of holes for the connection of earth wires and is inserted in ground by auger method.
These types of earth pit are generally filled with alternate layer of charcoal & salt or earth reactivation compound
Additional Information:
Packaging Details : Full Packing with Bag
We are one of the leading manufacturer of Concrete Earthing Pit. Concrete Earthing Pit is also one of them, it has the detachable lid which can be easily opened. It can be used in various sectors like for residential purposes, commercial and industrial complexes. They are used in order to secure Protection for all earthing terminations. They are very light weigh and have concrete earth pits. They ensure easy access for routine testing of electrical earths. They provide secure and user friendly accesses.
Features:
Made of heavy duty polyethylene for extra durability
Highly efficient
Easy to assemble
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : Non Packing
Delivery Time : Immediate
Esteemed and valued as a reliable manufacturer and supplier, we have been able to offer the finest quality of Cast Iron Manhole Cover. Available with us in various sizes and dimensions, the offered cast iron manhole cover is appreciated for its ability to tolerate harsh weathering conditions and prevent leakage of harmful gases from sewers. As a quality oriented organization, the quality of the offered cast iron manhole cover is never compromised at our end.
Features:
High mechanical strength
Resistance against impact
Weather resistance finish
Additional Information:
Payment Terms : L/C, D/A, D/P,
Delivery Time : Immediate
Being a reputed organization, we are affianced in manufacturing and supplying a quality assured collection of
Earthing Equipment.
Applications:
Used in electrical fitting of homes and office.
Features:
High tensile strength
Shock resistance
Optimum finish
Manufacturer, Supplier Of Earthing Material, GI Earthing Electrode, Copper Bonded Earthing Electrode, Copper Bonded Earthing Rod, Earth Pit Cover, Backfill Compound, Ese Lightning Arrestor, Conventional Lightning Arrestor, Pure Copper Earthing Electrode, Insulators, GI Stripe, Copper Stripe, Aluminium Stripe, Advance Earthing Compound, ESE Lightning Arresters, Y Connector, AC Cable, Inverter, MC4 Connector, ACDB / DCDB Box, Manufacturer, Supplier Of Earthing Material, GI Earthing Electrode, Copper Bonded Earthing Electrode, Copper Bonded Earthing Rod, Earth Pit Cover, Backfill Compound, Ese Lightning Arrestor, Conventional Lightning Arrestor, Pure Copper Earthing Electrode, Insulators, GI Stripe, Copper Stripe, Aluminium Stripe, Advance Earthing Compound, ESE Lightning Arresters, Y Connector, AC Cable, Inverter, MC4 Connector, ACDB / DCDB Box, Advanced Earthing Compounds, Earthing Insulators.
Additional Information:
Payment Terms : D/P
Galvanized Strip
Sizes 25x3mm, 25x6mm, 32x6mm, 40x6mm, 50x6mm & 75x6mm
Additional Information:
Payment Terms : D/P
Delivery Time : Ready to Stock
We are engaged in Ground Enhancing Material (GEM) from superior conductive material that solves your toughest grounding problems. This white powder makes an excellent flux to make the process less expensive. It is used extensively in the foundry flux industry for reworking scrap aluminum. These are formulated by chemical experts at our processing unit having an adept knowledge of chemicals.
Features:
ResistivityMaintains constant resistance of the ground systemPerforms in all soil conditions even during dry spellsDecompose or leach out with time
Additional Information:
Payment Terms : D/P
Delivery Time : Immediate
Laxmi Power Solutions manufactures earthing compound in Earthing Powder form as well as in Earthing GEL form. Laxmi Power Solutions earthing powder can absorbs a quantity of water in 13 to 15 times of its weight and able to retain it for a long period of time. This chemical powder is available in 20 kg, 25 kg, 30 kg, 40 kg and 50 kg bags.Features:Environmentally & metallurgical safeStable compoundHas an excellent shelf life and long term storage has no performance effects.
Additional Information:
Delivery Time : Immediate
Laxmi Power Solutions (Laxmi power solutions)
Plot No. 10, Gali No.5, Opposite Beri-Ka-Bagh, Malerna Road Indl Area, Sec 60, Ballabgarh, Ballabhgarh, Faridabad, Haryana - 121004
Share us via
