Product Details:
These are soft film, solvent deposited, water displacing type, corrosion preventives. These fluids can be applied directly to water wet metal surfaces, where they displace water, leaving a protective film. All these fluids have excellent spreading and they can be applied either by dipping or by spraying. The protective films of all these grades can be removed by wiping off with rags/waste soaked in kerosene/mineral turpentine or by alkaline degreasents or solvent degreasing methods. Rustilo DW 901 comply to IS:1154 specifications.

Applications:
This grade is intended for severe conditions and leaves a greasy film. The film is resistant to handling and gives excellent protection. It can be used for protection during storage of valuable machine tools and as a final protective for tools and machined components in factory stores or shops. These are water displacing, thin film type corrosion preventives. Rustilo DW 901 leaves a greasy film and is recommended for final protection of machine tools and components

Product Details:
Rust and corrosion are factors of major economic importance costing industry and consumer’s abnormal expenses. This unwanted expenditure can be curtailed/eliminated markedly through the use of petroleum based temporary rust and corrosion preventives. Various protective measures like alloying, plating, painting, etc. are used by the engineering industry to prevent metals from the effects of corrosion. While the measures indicated above are of a permanent / semi-permanent nature, petroleum based rust preventives find wide application for temporary corrosion protection during storage and transportation. Rustop grades have been selectively formulated for various applications and offer the following advantages.

• These are non -staining
• These are compatible with lubricating oils and hence the surface film need not be removed
• These are easily applied by brush, spray or swab
• These are easily removable by solvent
• These are economical

Application Areas:
Rust preventive specially designed for application on wide range of single items, on interior surfaces where elaborate protection is unnecessary. However, these grades should not be used where small orifice cavities occur.

RUSTOP 173 DW:
It is an outstanding water displacing, non staining dewatering fluid cum Rust preventive which rapidly separates water from metal surfaces after machining operations or alkali cleaning. The grade is barium free.

Product Details:
MAK Thermic Fluid A is a new generation, superior quality heat transfer oil formulated exclusively from highly refined base stock and specially chosen additive. The antioxidant additive provides excellent resistance to oxidation and thermal break down of the oil and ensures longer operating life. This oil has a very high flash point, low vapour pressure and low volatility. MAK Thermic Fluid A is compatible with seal materials normally used in heat transfer systems with mineral oil.

Application:

• Ideal for a wide range of closed-to-atmosphere (inertly sealed) applications
• Recommended for maximum operating temperatures of up to 300° C.
• Extensively used in textile manufacturing, chemical and processing plants etc where the oil is circulated in a pumped system operating under atmospheric pressure

Benefits:

• Superior dual-stage anti-oxidant system helps in preventing deposit formation, providing clean heat exchanger internal surfaces.
• High resistance to thermal decomposition.
• Its low volatility minimizes vapour pressure at elevated temperatures.
• Non corrosive & non toxic
• Excellent thermal conductivity & high heat transfer coefficient.
• Longer life for parts such as rotary seals and pumps.

Storage & Handling: The product should be stored inside. Keep it properly sealed to avoid contamination. Avoid freezing. Shelf life is 5 yrs. under protected storage conditions.

Health & Safety:
They are unlikely to be hazardous when properly used in recommended applications. Contamination of the oil from other oils, greases, chemicals, dirty water etc. can occur during the use. It should be avoided. Regular monitoring of the in-use product is recommended.  

Product Details:
These are soft film, solvent deposited, water displacing type, corrosion preventives. These fluids can be applied directly to water wet metal surfaces, where they displace water, leaving a protective film. All these fluids have excellent spreading and they can be applied either by dipping or by spraying. The protective films of all these grades can be removed by wiping off with rags/waste soaked in kerosene/mineral turpentine or by alkaline degreasents or solvent degreasing methods. Rustilo DW 901 comply to IS:1154 specifications.

Applications:
This grade is intended for severe conditions and leaves a greasy film. The film is resistant to handling and gives excellent protection. It can be used for protection during storage of valuable machine tools and as a final protective for tools and machined components in factory stores or shops. These are water displacing, thin film type corrosion preventives. Rustilo DW 901 leaves a greasy film and is recommended for final protection of machine tools and components

Product Details:
Rust and corrosion are factors of major economic importance costing industry and consumer’s abnormal expenses. This unwanted expenditure can be curtailed/eliminated markedly through the use of petroleum based temporary rust and corrosion preventives. Various protective measures like alloying, plating, painting, etc. are used by the engineering industry to prevent metals from the effects of corrosion. While the measures indicated above are of a permanent / semi-permanent nature, petroleum based rust preventives find wide application for temporary corrosion protection during storage and transportation. Rustop grades have been selectively formulated for various applications and offer the following advantages.

• These are non -staining
• These are compatible with lubricating oils and hence the surface film need not be removed
• These are easily applied by brush, spray or swab
• These are easily removable by solvent
• These are economical

Application Areas:
Rust preventive specially designed for application on wide range of single items, on interior surfaces where elaborate protection is unnecessary. However, these grades should not be used where small orifice cavities occur.

RUSTOP 173 DW:
It is an outstanding water displacing, non staining dewatering fluid cum Rust preventive which rapidly separates water from metal surfaces after machining operations or alkali cleaning. The grade is barium free.

Product Details:
MAK Thermic Fluid A is a new generation, superior quality heat transfer oil formulated exclusively from highly refined base stock and specially chosen additive. The antioxidant additive provides excellent resistance to oxidation and thermal break down of the oil and ensures longer operating life. This oil has a very high flash point, low vapour pressure and low volatility. MAK Thermic Fluid A is compatible with seal materials normally used in heat transfer systems with mineral oil.

Application:

• Ideal for a wide range of closed-to-atmosphere (inertly sealed) applications
• Recommended for maximum operating temperatures of up to 300° C.
• Extensively used in textile manufacturing, chemical and processing plants etc where the oil is circulated in a pumped system operating under atmospheric pressure

Benefits:

• Superior dual-stage anti-oxidant system helps in preventing deposit formation, providing clean heat exchanger internal surfaces.
• High resistance to thermal decomposition.
• Its low volatility minimizes vapour pressure at elevated temperatures.
• Non corrosive & non toxic
• Excellent thermal conductivity & high heat transfer coefficient.
• Longer life for parts such as rotary seals and pumps.

Storage & Handling: The product should be stored inside. Keep it properly sealed to avoid contamination. Avoid freezing. Shelf life is 5 yrs. under protected storage conditions.

Health & Safety:
They are unlikely to be hazardous when properly used in recommended applications. Contamination of the oil from other oils, greases, chemicals, dirty water etc. can occur during the use. It should be avoided. Regular monitoring of the in-use product is recommended.