Our Products
Separators & Strainers
2 Products availableLeading Manufacturer, Supplier & Retailer of Ball Valve, Divert Valve Cut-off Valve, sampling valve, Plug Valve Cap and Butterfly Valve Handle with Gear.
Ball Valves are used in a wide variety of high pressure applications. A full unrestricted flow allows no product restrictions through the valve. Thus, allowing easy diversion. VNE offers three way ball valves made of T316 (CF8M) stainless steel, with PTFE seats that are easily removed.
Clamp and Weld ends are standard. Other connections are available upon request. 1/2" through 3" sizes are available. VNE Ball Valves meet FDA and 3A requirements.
Sri Pumps Single Seat Valves are shut-off, Divert, Reverse-acting, Valves, having unique sealing design for total Hygienic operations, it's Ball Shaped Valve body is designed for optimum flow and CIP cleaning, These valves can be supplied with control head for operation with Solenoid Valve and Micro Switches. Their construction feature, choice of material and hygienic concept makes them especially suitable for Use in sectors where hygienic is indispensable.
Nom.Size | Nom.Size | Table for LL Type | ||
D | D | A | B | C |
INCHES | MM | MM | MM | MM |
1 1/2 | 38.1 | 518.0 | 90.0 | 70.0 |
2 | 50.8 | 530.0 | 90.0 | 82.0 |
2 1/2 | 63.5 | 578.0 | 106.0 | 106.0 |
3 | 76.2 | 710.0 | 126.0 | 126.0 |
The rotary action of the stem provides a shearing action against the seal, which allows for clean separation of the process during closure. Tight shutoff is a characteristic of control valves, since the stem remains in continual. Improved sealing devices and highly accurate machining of the stem have provided tight shutoff as well as characterizable control. The design of the regulating element, which allows the stem to turn into the flow without any significant side loads.
Plug valves are valves with cylindrical or conically-tapered "plugs" which can be rotated inside the valve body to control flow through the valve. Plug valves are simple and often economical. When the plug is conically-tapered, the stem/handle is typically attached to the larger diameter end of the plug. The stem and handle often come in one piece, often a simple, approximately L-shaped handle attached to the end of the plug. The other end of the plug is often exposed to the outside of the valve too, but with a mechanism which retains the plug in the body.
The series of Butterfly Valve handles are suitable for all kinds of butterfly valves. Clamp and Weld ends are standard. Other connections are available upon request. 1" through 4" sizes are available. VNE Ball Valves meet FDA and 3A requirements.
Multi Positin Handle | |||
Size | A | B | C x C |
DN 15 - DN 400.5" - 1.5" | 155 | 20.2 | 8 X 8 |
DN 50 - DN 652" - 3" | 155 | 20.2 | 10 X 10 |
DN 80 - DN 1503.5" - 6 " | 155 | 22.2 | 11 X 11 |
DN 2008 " | 230 | 30.2 | 14 X 14 |