Fuel Injector has become very critical part of modern cars since it also control efficiency and average of the modern cars. It is very necessary to remove carbon deposited on injector since fuel imported in Indian market are of lower quality.

To overcome this problem LAUNCH has designed special injector cleaner CNC-402A keeping in mind fuel quality in India. CNC-402A is an advance injector cleaner, which can clean and even testpetrol car engine injectorsby ultrasonic cleaning. Most advanced and path breaking innovation from LAUNCH for automotive expert.

LAUNCH CNC 402A injector cleaner is designed keeping in mind car running on Indian road LAUNCH CNC 402A can support Maruti, Hyundai, Tata, Toyota, Nissan, Mitsubishi, Honda, VW, Skoda, Renault, BENZ, BMW, Jaguar, LandRover, Porsche, Volvo, AUDI, Fiat, OPEL, Fiat and many more brand running on Indian road.

Feature of LAUNCH CNC 402A:

• Ultrasonic cleaning: A most advance method to clean injector in most efficient way. This process removes carbon deposit from injector in most efficient way.
• Uniformity/Sprayability test:This test is used to test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight.
• Leakage test: this test is used to test the sealing and dribbling conditions of injectors under system pressure with help of in built digital fuel pressure control.
• Injecting flow test: It is a test to check the injected amount of the injector in 15 seconds of constant injection, from this result technician can know about clogging or wear of Injector.
• Auto test: To test injectors by simulating different working conditions.
• N-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
• CNC 402A is also supported with fuel drain system by which just pressing one button drain all cleaning fluid.
• Reverse flush test: LAUNCH CNC 402A can also do reverse flush test where technician can clean injector by flushing liquid from outlet of injector to the inlet of the injector.

Specification:

• Power supply: AC220V 10%, 50/60Hz;
• Ultrasonic cleaner power: 100W
• RPM range: 10--9990rpm; Step: 10rpm
• Time range: 1--9999s
• Pulse width: 0.5--25ms; Step 0.1 ms;
• Fuel tank capacity: 4000ml
• Dimensions: 400mm* 410mm*580mm;
• Net Weight: 27kg.
• Working Temperature: -10+50C;
• Intensity of outer magnetic field: < 400A/m;

Fast, simple, profitable, the 8-CCD sensor Wheel Aligner from Launch, wireless data transfer with bluetooth technology or 433 MHz radio module.

Feature:

• 20 degree CCD Camera
• 6 meter wheel base
• 8 toe sensors
• Fast radio data transfer
• Time saving features:
• Standard measurement
• Fast test, short overview of toe, camber, thrust angle in a second
• Additional test, for accident cars
• Lower car function, no need for lowering clamps
• Customer defined car data base

Reliable:

• Solid constructions of sensor heads
• Water protected
• Standard batteries
• Standard high quality Pc
• Self centring clamps, optional adapters for Aluminium rims available
• Cable free measurement, removes hassle for broken cables

Other X-631 Wheel AlignerFeatures

• Infrared 8-beam and 16-sensor loop measurement, accurate and stable.
• Newly developed CCD signal processing technology, nearly uninfluenced by the strong sunlight.
• Complete system upgrading function.
• Unique voice prompt function and visualized animation, very easy to understand.
• Trustworthy operating system to give more convenient and safe operations.
• Keyboard quick switch operation.
• Both special version and common version are provided for user to select.
• Both normal version and demonstration version are provided to make user's training more convenient and quick.
• Large capacity (4000mAh) Lithium battery with low power consumption and dormancy mode of design.
• In-block type of casting Aluminum alloy probe rods can strongly guarantee the stability and the test precision of the product.
• Camber, toe-in, battery electricity quantity, charging status and electronic level, etc. can be real-time displayed by LCD.

X-631 Wheel AlignerSpecification

• Item Range
• Front total toe-in 40
• Front toe-in 20
• Front camber 8.0
• Caster 20
• Kingpin inclination 20
• Rear total toe-in 40
• Rear toe-in 20
• Rear camber 8.0
• Thrust angle 5.0

Fuel Injector has become very critical part of modern cars since it also control efficiency and average of the modern cars. It is very necessary to remove carbon deposited on injector since fuel imported in Indian market are of lower quality.

To overcome this problem LAUNCH has designed special injector cleaner CNC-602A keeping in mind fuel quality in India. CNC-602A is an advance injector cleaner, which can clean and even testpetrol car engine injectorsby ultrasonic cleaning. Most advanced and path breaking innovation from LAUNCH for automotive expert.

LAUNCH CNC 602A injector cleaner is designed keeping in mind car running on Indian road LAUNCH CNC 602A can support Maruti, Hyundai, Tata, Toyota, Nissan, Mitsubishi, Honda, VW, Skoda, Renault, BENZ, BMW, Jaguar, LandRover, Porsche, Volvo, AUDI, Fiat, OPEL, Fiat and many more brand running on Indian road.

Feature of LAUNCH CNC 602A:

• Ultrasonic cleaning: A most advance method to clean injector in most efficient way. This process removes carbon deposit from injector in most efficient way.
• Uniformity/Sprayability test:This test is used to test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight.
• Leakage test: this test is used to test the sealing and dribbling conditions of injectors under system pressure with help of in built digital fuel pressure control.
• Injecting flow test: It is a test to check the injected amount of the injector in 15 seconds of constant injection, from this result technician can know about clogging or wear of Injector.
• Auto test: To test injectors by simulating different working conditions.
• N-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
• CNC 602A is also supported with fuel drain system by which just pressing one button drain all cleaning fluid.
• Reverse flush test: LAUNCH CNC 602A can also do reverse flush test where technician can clean injector by flushing liquid from outlet of injector to the inlet of the injector.

LAUNCH CNC 602A Specification:

• Device Weight: About 35kg
• Fuel tank capacity: 4700ml
• Dimensions: 385mm410mm500mm
• Power supply: AC220V
• Input power: 250W
• Ultrasonic device power: 100W
• Simulated RPM range: 20 to 9880rpm
• Time range: 1 to 9988 Second
• Generated Pulse width: 0.5 to 25ms

LAUNCH two post lift is designed by keeping in mind space, reliability and safety of a technician.

LAUNCH two post lift feature:

• The cable and oil pipe are fully concealed; with decent and elegant appearance.
• Double hydraulic cylinder and high strength chain drive makes stable and smooth lifting and lowering.
• Wire rope equalization system forces synchronous movement of two carriages and effectively prevents vehicle form tilting.
• 24V low voltage control boxIP54 level ensures operators safety.
• 24V cylinder travel limit switch effectively protects cylinder and extends its lifespan.
• Door rubber pad protects car door from being damaged in collision.
• More lifting pads with different height meets the requirements for light lorries and SUVs.
• Passed 115% dynamic loading test and 150% static loading test .
• CE certificated.

Technical parameter

• Rated load 3500kg
• Lifting height 1850mm
• Initial height : 110mm
• Lifting time 50s
• Lowering time 20s40s
• Passing width 2486mm
• Overall width 3370mm
• Overall height 2860mm
• Motor power 2. 2kw
• Motor voltage 3 phase/380v or Single phase/220V
• Working noise 75dBA
• Working oil pressure 16M Pa

Wheel Alignment is the most critical part for tire life. Wrong or incorrect wheel alignment can affect tire life and also safety of the car. Considering this into the mind LAUNCH has introduced one of the most advance 3D wheel alignments in the world, LAUNCH X-712S. Time taken to alignment on LAUNCH X-712 is one of the lowest in its range.

LAUNCH X-712 wheel alignment is designed for high accuracy, stable repeatability and reliability. X-712 Software is designed by keeping in mind technician of the garage and covers full range of car wheels.

LAUNCH X 712 Wheel AlignmentFeature:

• Car readings in less than two minutes and hence increased productivity by doing alignment more cars in less time and less waiting for measurements.
• Most advance feature like wireless communication, automatic camera tracking and high mobility allow sharing between bays or relocation within the shop as needed.
• With help of LAUNCHS experience in developing software for new generation cars, X-712S comes with frequent updates ensure the most current information is readily.
• No calibration needed when open the package.
• LAUNCH X-712s can easily switched between 3D/2D interfaces.
• To make X-712S wheel alignment more user friendly LAUNCH introduceHuman voice and animation guide operation.
• Keeping in mind low space in garages in INDIA LAUNCH has designed Column and cabinet in a single piece.
• LED beam for measurement results and customer-defined advertisement displayed.
• Ergonomics wheel clamp design for rim protection and easy operation.

LAUNCH X-712S Specification

• Power: AC220V10% 50Hz or
• Screen Display: 19 Inch colourful LCD
• Camber: 0 to 10o
• Thrust angle: 0 to5o
• Toe-in: 0 to 20o
• Caster: 0 to 20o
• Steering axle inclination: 0 to 20o

Working Environment:

• Storage temperature: -10 to +55
• Working temperature: 0 to +40
• Humidity: 85%
• Light requirement: No direct strong lights irradiate the target and reflect to the camera
• Lift Height: 850mm to 1200mm
• The lift height difference between the left rail and right rail: