Our Products
We offer the best product range of Lateral Pressure Assembly, Sampling Augers, Semi Automatic Cone Penetrometer, Static Cone Penetrometer and Soil Cone Penetrometer.
Description and Specification for Lab Tenders
Lateral Pressure Assembly.
It is designed for application of cell pressure upto 10kg/cm on a triaxial specimen in the triaxial cell.
The unit is mostly used in routine tests which last for about 10 to 15 minutes wherein the variations of cell pressure can be tolerated. Specification:The apparatus consists of a pressure chamber which has a flanged top 2 cap fitted with a 10 kg/cm . Pressure gauge and a valve for pumping in air. Water inlet and drain cock are fitted to the chamber. 2 The foot pump supplied easily develops a pressure of 10 kg/cm2 Complete with connecting pressure hose. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Sampling Augers.
Augers are used to collect distributed soil samples at reasonal depths for laboratory tests. Augers are available in two type and each in different sizes.
Blade type (post hole type) and Helical type (Screw type). Each auger outfit consists one each of Auger head, one meter long rod, Tee piece and hangle. Depths of excavating can be increased by using additional extension rods. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Semi Automatic Cone Penetrometer.
Used to determine the moisture content at which clay soils pass from a plastic to a liquid state. Two Version are available. One the standard one & the other is semi-automatic with timer where the cone is allowed to free fall for a period of 5 seconds including one each of 50 gm. & 100 gm. weight, one penetration cone, preset counter & measuring cup. civil lab equipments manufacturer
Soil Test Instruments Lab equipment manufacturers, exporters and Soil Test Instruments Lab suppliers
Description and Specification for Lab Tenders
Static Cone Penetrometer 30KN (300KGF) Capacity.
The drive is by means of a rack and pinion manually through a gearing arrangement. The gear box and pinion are fixed on two handles, sprockets and chain arrangement. The movement of the rack is guided by a bracket ( attached to the rack) and two pillars. The penetration resistance i.e. the pressure is indicated on hydraulic gauges through a hydraulic measuring head. Two pressure gauges of 15cm dia dial and 2 capacities 0-160kg/cm are provided. An automatic cut-off valve, to protect the low capacity gauge from being overloaded is provided. The 2 valve can be adjusted and locked at desirable values between 20 to 60cm . A provision is made to anchor the unit to the ground (with the help of four anchors supplied with the unit) and there is a provision for lateral 2 movement of the unit so that subsequent tests could be performed without shifting the entire anchorage. A 10cm penetration cone with friction jacket is provided along with fifteen mantle tubes (non-uniform having an effective length of 1 m each with sounding rods for finding out the cone (point) resistance or jacket friction. civil lab equipments manufacturer
Soil Test Instruments Lab equipment manufacturers, exporters and Soil Test Instruments Lab suppliers
Description and Specification for Lab Tenders
Soil Cone Penetrometer.
For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results of those soil which have low plasticity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm penetrates 25mm gives the liquid limit. civil lab equipments manufacturer
Soil Test Instruments Lab equipment manufacturers, exporters and Soil Test Instruments Lab suppliers
Description and Specification for Lab Tenders
Pavement Dynamic Cone Penetrometer.
A simple and robust instrument for rapid in-situ measurement of the structural properties of road pavements. Provides fast and efficient method of obtaining information. For continuous measurements to a depth of 800mm and 1, 200mm with the extension rod. Portable, and can be accommodated in a carrying case. Supplied with a wooden Carrying Case The Equipment consists of: Top and Bottom Rod Handle Hammer 1 m Scale 60Cone Anvil civil lab equipments manufacturer
Asphalt Testing Lab equipment manufacturers, exporters and Asphalt Testing Lab suppliers
LABORATORY TRAINING SYSTEMS & EQUIPMENTS (LABORATORY TRAINING SYSTEMS & EQUIPMENTS)
6148/6, Guru Nanak Marg. Cantt., Ambala Cantt, Haryana, India
Share us via
Write a Review
