Our Products
Our offered Product range includes Proctor Needles, Plummet Balance Soil Tester equipment, Particle Density Gas Jar Soil Tester Equipment, Colour Standard Chart and Sampling Tubes.
Description and Specification for Lab Tenders
Soil Hydrometer.
Used for grain size analysis of soils where more than 10% of the material will pass through 75 microns B.S. sieve. Manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved.
The scale range is 0.995 to 1.030 0 density (gms./cc) at 27oC smallest division on the scale is 0.0005. Note: Hydrometer for other liquids also available. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Mud Balance.
Designed to find out specific gravities of semi liquids like mud and other liquids having densities in the range 0.8 to 2.5. It has a
stainless steel bam calibrated specific gravities from 0.8 to 2.5. A stainless steel cup with lid and overflow vent is fitted on one side of the beam. A counter weights with cursor slides over the graduated scale. The beam has a knife-edge at centre which rests in a fulcrum fitted in the stand. Leveling screws and spirit level are fitted to the stand. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Proctor Needles (Spring Type).
The instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division.
Long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. The small penetration stem is also graduation in 12.5mm division and is used with needles of smaller areas. Needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq Cm. And one tommy pin is supplied. Complete as above in a wooden carrying case. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Plummet Balance.
Conventionally particle size distribution analysis is carried out using pipette and hydrometer methods.
Whereas in hydrometer method it is possible to determine particle sizes in the range 75microns, the method involves computation and it is time consuming. The pipette method can be used for determining only the percentage of specific sizes less than 0.02, 0.006 and 0.002mm as a percentage of total soil sample. The plummet balance method to determine sub sieve particle size for the entire range is very rapid and only manipulation of height of the balance, so that plummet sinks to the right depth is required. The percentage of soil in suspension is directly indicated by a pointer over a graduated scale. A vertical rod is mounted on a sturdy base having leveling screws. A pointer with steel pivots turns is jewel bearing an moves over a graduated scale. Scale graduations are market 0-100% x 2% To the other end of the pointer a plummet is hanged.Rack and pinion arrangement is provided on the vertical rod for adjusting the height. Supplied with a chart showing relationship between K and temperature of suspension of soils of varying specific gravity from 2.4 to 2.8 to help in solving stroke's equation. Supplied complete with one Perspex plummet one measuring jar and one rider weight for zero adjustment and rider weight for adjusting the pointer to 100%. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Core Cutter.
This is used for determination of in situ dry density of natural or compacted fine grained soil, free from aggregates.
A cylindrical cutter is used to extract a sample of the soil with the help of a dolly and rammer. From the weight, density and the moisture, and dry density of the soil is ready calculated. It consists one each of: cylindrical core cutter mode of steel, 127.3mm. Long and 100mm internal diameter. Steel dolly, 25mm high with a lip to enable it to be located on top of the core cutter, rammer with detachable steel rod. Spare, Optional Extra And Accessories:-1. Cylindrical core cutter 100mm i.d. x 175mm long2. Dolly3. Test form pad of 50. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Density Bottle (GAY LUSSAC Type).
For determining the particle density (specific gravity) of sand, fine aggregate and filler. Capacity 25ml, 50ml, 100ml, 250ml, 500ml and 1000ml. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Particle Density By Gas Jar Method (End-Over-End Shaker).
This method applies for soil containing upto 10% of particles retained on 37.5 mm sieve. The equipment is used to rotate two gas jars at approx. 50 R.P.M. Glass Jar is 1 litre in capacity with rubber bung. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Colour Standard Chart.
For the determination of organic impurities in soils and fine aggregates. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Universal Extruder Frame Hydraulic.
The extractor frame is used for taking out soil samples compacted or undisturbed, from 100mm dia and 150mm dia cylinders such as Core Cutters, Proctor moulds, C.B.R. moulds etc.
Specification :
It consists of a 50Kn capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 4/100mm dia and the other of 6/150mm dia moulds are supplied Height of thrust plate is adjustable. Accessories :Set of plungers adapters and thrust plates for 38mm, 50mm and 75mm dia specimen. Note: Motorized model. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Sampling Tubes.
Sampling tubes for collection undisturbed samples of 38mm dia for triaxial strength and unconfined compressive strength either straight from the field or from a sample of larger diameter.
The wall thickness is maintained approximately 17 per cent. Both relieved and unrelieved sampling tubes are available. In the relieved type of tube, the internal diameter is relieved by about 0. 5mm (inside clearance 2%) beyond approx. 19mm length from the cutting edge of the tube. This is most suitable for highly cohesive soils. In the unrelieved type, the internal diameter is uniform through out. This type is most suitable for soil of low cohesion. These 38mm dia tubes are available in different lengths. Unrelieved(a)150mm, (b) 200mm, (c) 225mm (d) 300mm long. Relieved(a) 150mm (b) 200mm, (c) 225mm, (d) 300mm long. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Split Spoon Sampler.
Description and Specification for Lab Tenders
Drop Hammer And Guide Pipe Assembly.
Weight 65 Kg. Complete with two end caps to give a free fall of 75cm the drop hammer. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Frame Sieves 300mm Dia And 450mm Dia.
Sizes available: 125mm, 106mm, 100mm, 90mm, 80mm, 75mm, 63mm, 53mm, 50mm, 45mm, 40mm, 37. 5mm, 31. 5mm, 26. 5mm, 25mm, 22. 4mm, 20mm, 19mm, 16mm, 14mm, 13. 2mm, 12. 5mm, 11. 2mm, 10mm, 9. 5mm, 8mm, 6. 7mm, 6. 3mm, 5. 6mm, 4. 75mm, 4. 0mm, 3. 35mm, 2. 36mm, 1. 18mm, 1. 00mm. Lid and receiver in g. I. Frame for 300mm dia and 450mm dia sieves. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
California Bearing Ratio Spares.
CBR mould complete with extension collar and perforated base plate, made of gunmetal.
CBR mould complete with extension collar and perforated base plate, made of steel." Perforated swell plate with adjustable stem and lock nut, made of gunmetal. Perforated swell plate with adjustable stem and lock nut, made of steel.Solid base plate, made of gunmetal. Solid base plate, made of steel. Cutting collar. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
California Bearing Ratio Apparatus (Motorised) For Testing Lab
Description and Specification for Lab Tenders
California Bearing Ratio Apparatus (Motorised).
Similar to above but supplied with bench mounting type 5000kgf. capacity load frame motorised, in place of load frame hand operated.
The lead screw of the load frame has a single constant rate of travel of 1.25mm/min. Salient Features Accessories for Laboratory C.B.R. Apparatus :High sensitivity Proving Ring 3000kg. capacity with calibration chart and carrying case. Dial Gauges 2 Nos.0.01mm x 25mm.Annular metal weight 5 kg. 147mm dia with 53 mm dia. central hole. Slotted metal weight, 5 kg. 147mm dia with 53 mm dia slot. Note: Proving Ring of other capacities are also available. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Dead Weight Type Oil Water Constant Pressure System.
This device is used to maintain cell pressure constant for a long duration and the system can be used in place of convensional constant pressure system using mercury posts where certain minimum heights are required.
Problems like deairiation of pump, leakage of mercury etc. are eliminated in this system. This unit is smaller in volume and can be used in mobile laboratory also. This can maintain pressure in the cell upto 20 kg/cm.sq. Pressure is maintained constant in the system by a balancing calibrated weights on a spindle against a column of oil, operating under constant feedback. Salient Features Construction :The system consists of an oil pump continuously driven by an electric motor during the test period. The internal components are housed in a strong compact housing. The piston on which weights are kept rotates with minimum friction. A transparent Oil Water vessel is provided on transmit pressure to the cell. A hand pump provided facilitates priming and to maintain constant pressure during power failure.Specifications :Range 0-20 bar (0-20 kg/cm) Steps of Pressure 0.5 bar (0.5 kg/cm)Accuracy +0.5%Electric Supply 230 Volts, Single Phase, 50 Hz, A.C.supply Supplied complete with Pressure Guage, flow valves, connecting Pressure hose and set of weights to give maximum pressure of 20 bar (20 kg/cm). civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Extractor Frame Hydraulic.
This extractor Frame is used for taking ut soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as core cutters,
Proctor moulds, C.B.R. moulds etc. Salient Features Specifications : It consists of a 5 Tone capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 100 mm dia and the other of 150 mm dia moulds are supplied. One thrust plate for 150 mm dia and one for 100 mm dia specimens are also supplied. Height of thrust plate is adjustable. Accessories : Set of Plungers adapters and thrust plates for 38 mm, 50 mm and 75 mm dia specimen. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
High Speed Stirrer.
This is for mechanical analysis and also other laboratory applications for stirring.
Speed approximately 4000rpm under load. A dispersion cup is supported on a rest on the stand of the stirrer and has a removal baffle.For operation on 230-250 volts AC Supplied without dispersion cup or baffle. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Pycnometers Bottles.
These bottles are used for relative density measurements, made from borosilicate glass with capillary bored stopper. Capacities available (a) 50 cc and (b) 100 cc.
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Sieve Shaker Rotap.
To make process of sieving simpler and quicker, Rotap Sieve Shaker is useful this produces circular shaking of the sieves.
At the same time the sieves are tapped. The mechanism for imparting circular action and tapping is oil immersed in a tank and in motorized. The Shake0r can accommodate upto 7 Nos. Sieves of dia 150mm or 200mm. Suitable operation on 230 volts A.C. Single phase. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Split Spoon Sampler.
This is used for Standard Penetration Test. For determining penetration resistance (N value) of soil which can be related to unconfined Compressive strength, Penetration resistance (N value) of soil is determined by giving a number of blows with a 65 kg. weight falling through a given distance of 75 cm required to penetrate the assembly to a depth of 30 cm, when properly seated on the ground. Salient Features Specifications : The sampler is made from a steel tube split lengthwise and held together by a head fitted with a ball check valve and a hardened steel shoe of inside cutting edge of 35 mm dia. The sampler is 35 mm I.D. and 50.8mm in outer diameter and 508 mm / long. One adapter to connect 'A' type drill rods is also supplied.Spares: Body of split spoon sampler, shoe of split spoon sampler, head of split spoon sampler. civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
Description and Specification for Lab Tenders
Ball Mill For Grinding Lime Mortar.
It is of welded steel construction, having an internal diameter of 12 inch x 13.5 inch long (volume 1 cu.ft.) and is made of 5/16 inch thick steel plate.
Material Testing Lab equipment manufacturers, exporters and Material Testing Lab suppliers The drum is supported on heavy duty ball bearings on the two ends. It has an opening of 4 inch width along the full length of the drum. An air and water tight cover is provided to close the opening after the specimen has been but inside the drum. The speed of rotation is 28-30 r.p.m. The pug mill has an arrangement for being held in any position. A revolution counter for recording the revolutions of the mill is fixed on the machine. Twelve 3/4 inch dia steel balls are also supplied with the unit. It is fitted with a 1/2 H.P. electric motor to operate on single phase, 220/230 volts A.C. supply civil lab equipments manufacturers
Description and Specification for Lab Tenders
Density Basket.
Salient Features Made of brass with stainless steel wire mesh 6.3mm size ruggedly constructed, approximately 20cm dia x 20cm high. Complete with handle. civil lab equipments manufacturers
Material Testing Lab equipment manufacturers, exporters and Material Testing Lab suppliers
Description and Specification for Lab Tenders
This instrument is used for determination and checking of bitumen percentage in bituminous mix, the mix is added with a solvent and dissolved bitumen is removed by centrifugal action.Material Testing Lab equipment manufacturers, exporters and Material Testing Lab suppliers Consists of a removable aluminum rotor bowl, capacity 1500 gms. This shaft and thus the bowl is rotated fast manually by enclosed gears in the cast body and handle. Solvent is introduced during the test through the holes in the cap of the housing. A drain is provided to collect dissolved bitumen coming out of the rotating bowl and getting collected in the housing. Salient Features Centrifuge Extractor (Motorized) : Same as above but shaft is rotated by an electric motor and gear. Care is taken to prevent solvent entering into the rotor of electrical motor. Operates on 230 Volts A.C. single phase. Accessories : 1. Filter paper disc (packet of 100nos.) 2. Benzene
Description and Specification for Lab Tenders
Specifications: Drive by Diesel or Petrol / Kerosene Engine Diamond wheel of 300mm dia.Bitumen-Asphalt Testing Lab equipment manufacturers, exporters and Bitumen-Asphalt Testing Lab suppliers suitable for a cut of depth unto 110 mm is supplied with standard outfit The trolley on which the engine is fitted also has a water rank which supplies a stream of water to keep the cutting blade cool during the operation. Adjustment to control depth of cut is also provided. A safety Guard is provided over the diamond wheel. Diamond wheels up to 600 mm dia., can be supplied at extra cost. civil lab equipments manufacturers
Description and Specification for Lab Tenders
This device was developed by U.S. Bureau of Public Roads and is used timesaver deflections of flexible pavements.Bitumen-Asphalt Testing Lab equipment manufacturers, exporters and Bitumen-Asphalt Testing Lab suppliers The light weight instrument is supplied in two parts for assembling on site with easy hand tools. In use one end of the beam rests at a point under investigation while the beam is pivoted at the centre. The free end carries a dial gauge to record the deflections. The other end is kept on a stable platform. The beam ratio is 2:1 which magnifies even small deflections. Supplied with a dial gauge 0.01 x 25mm. This is a light weight dismount liable instrument and easy to carry. civil lab equipments manufacturers
Description and Specification for Lab Tenders
Suitable to cut / drill cores of concrete, rocks, stones, Tiles or the similar material.Bitumen-Asphalt Testing Lab equipment manufacturers, exporters and Bitumen-Asphalt Testing Lab suppliers The machine is suitable for care samples of size upto 150mm diameter with the help of thin walled diamond bits which are at extra cost. The machine has sturdy base with pillar support in which rack & pinion is provided for adjustment in height and penetration assembly. The leveling screws are at the base. For gripping the damply in positions suitable grips are provided. A suitable electric motor, standard make is fitted in the machine with cooling arrangement with water. The base frame is also fitted with wheels for ease of transportation. Salient Features Dimension approx. are as under : Height : 1300mm Base : 600 x 1200mm Head travel on rack : 350mm Drill Speeds : 900 RPM for soft samples and 350RPM for hard samples. Water Swivel : Built in the machines. Suitable for 230 volts AC, single phase Accessories : 1. Thin wall diamond bits 2. Core Barrel. civil lab equipments manufacturers
Description and Specification for Lab Tenders
The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The Greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPa or PSI can be found, with 20% of actual. Salient Features Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case. civil lab equipments manufacturers
Description and Specification for Lab Tenders
It is similar to the above but is used for testing concrete with over size aggregates (for which test, cubes promise no reliable results) and for testing concrete roads.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers Its plunger is wider as such, the amount of concrete reached by the impact is considerbly greater. With this model also the results obtained are within 20% of the actual compressive strength. The instrument is supplied with two handles which can be attached to the body of the concrete test hammer for carrying out the test easily. Complete with grinding stones. civil lab equipments manufacturers
Description and Specification for Lab Tenders
For 15cm dia x 30cm length cylinders. Salient Features Specifications The set comprises of a cylinder capper, a cylinder carrier and a ladle.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers The cylinder capper consists of a base on which two accurately machined plates are mounted vertically. One plate is firmly fixed and the other one is adjustable horizontally. Two plates are provided with holders of holding the cylinder in position. The holders are split and the bottom half of each holder is fixed firmly and the top half of each is removable and bolted down to the lower half. On the upper parts of the vertical plates 'V's are provided for pouring the capping compound. Two spacers are also provided. Complete with cylinder carrier and ladle for molten compound. civil lab equipments manufacturers
Description and Specification for Lab Tenders
For capping compression cylinder specimens. This apparatus can be used both in the laboratory and in the field.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers The specimens capped in this apparatus have plane parallel faces. Salient Features Specifications: For cylinders 150mm dia x 300mm long. Consists of a base with an upright. The upright serves as a guide for positioning the capping plate and the cylinder. The 19mm thick capping plate is machined accurately. There is a recess in the plate for keeping the molten capping compound and to position cylinder. Complete with cylinder carrier and ladle. civil lab equipments manufacturers
Description and Specification for Lab Tenders
This is used for determining the workability of building limes. Salient Features Specifications.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers The flow table consists of a 30cm. dia ground and polished steel plate with three inscribed annular circles. 7, 11 and 19cm. dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm ID at base and 40mm ID at top, height of the mould 90mm. civil lab equipments manufacturers
Description and Specification for Lab Tenders
The hydraulic jack has a 25mm diameter hole going through the centre. It is designed for dual direction and has a working stroke of approximately 22cm.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers A specially designed hand operated pumping unit is supplied for operation in both directions. A detachable handle is provided for operating the pump. The load is indicated on a 15cm dial hydraulic pressure gauge calibrated 0 - 50000 x 500 kg. Note : central hole jacks of other capacities can also be supplied on special request. civil lab equipments manufacturers
Description and Specification for Lab Tenders
Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers The counter balanced drum is easy to tilt 1.1/2 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with h.p. electric motor. Suitable for operation on 220/230 volts A.C. single phase. civil lab equipments manufacturers
Description and Specification for Lab Tenders
The laboratory Jaw Crusher is designed for fast crushing of Aggregates, Ores, Minerals, Coal, Coke, Chemicals and other similar materials.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers It is compact and of rugged construction for general laboratory or small pilot plant operations. Two jaws of manganese steel are provided in this laboratory Jaw Crusher. The moveable jaw produces two blows for every revolution, thus reducing over sizing to a minimum. A combination of forward and downward strokes with a rocking action exerts pressure on the coarser material, yet permits the finished material to pass through the jaws civil lab equipments manufacturers
Description and Specification for Lab Tenders
Used for finding specific gravity of Hydraulic Cement. Made from Borosil glass. The flask is 243mm in total height, .Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers having a bulb of 90 mm dia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia in which fits a ground glass stopper. The neck has over-all 11mm I.D. upper portion is graduated from 18 ml to 24ml with 0.1ml graduation. Just at the bottom of the neck 1ml capacity is marked in between there is 17ml capacity bulb. civil lab equipments manufacturers
Description and Specification for Lab Tenders
It is used to measure the drying shrinkage of concrete autoclave expansion of Portland cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying. Salient Features Specifications.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers The instrument consists of a channeled base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial gauge, reading to 0.002mm x 12mm. can be fixed to the top cross plate. The plunger end of the dial gauge can be located upon a 6.5mm. dia ball or other reference point cemented in the specimen. On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standardization bar with insulated grip and with 6.5mm dia. Balls mounted in the ends. The unit can be supplied with a 0.0001inch x 1/2inch dial gauge at extra cost. civil lab equipments manufacturers
Description and Specification for Lab Tenders
It is designed for finding out the deformation and strains on 15cms. diameter and 30 cms. high cement concrete cylinders when subjected to compressive loads.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers Salient Features Specifications: Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compressometer over the cylinder. A dial gauge 0.002mm x 12mm is mounted on the upper ring and the tip of the dial gauge rests on an anvil. The zero of the dial gauge can be set by adjusting the anvil screw. Supplied in a wooden carrying case. civil lab equipments manufacturers
Description and Specification for Lab Tenders
It is used for mixing cement pastes, mortars and pozzolanas. Salient Features Specifications: the apparatus consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion by means of gears.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers It has two speeds of 140 + 5 R. P. M. and 285 + 10 r. P. M. with planetary motions of approximately 62 R. P. M. + 5 R. P. M. and 125 R. P. M. +/-10 R. P. M. respectively. The stand of the mixer has arrangement to raise or lower the bowl. Complete with stainless steel bowl of about six litres capacity. Suitable for operation on 230 volts, 50 cycles, single phase, A. C. Supply. civil lab equipments manufacturers
Description and Specification for Lab Tenders
An increasing number of contractual obligations call for various forms of vibro-compacted concrete for achieving a better and more consistent mixture.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers The Needle Vibrator is recommended for vibro-compaction of test cylinders and beams at site and in the laboratory. This instrument can also be used at small construction sites. A motor fitted on a swivel base drives a flexible shaft, which in turn, vibrates the needle at about 10, 000 vibrations per minute. (approx.) Salient Features Specifications: Needle Vibrator with a 25mm. diameter x 350mm long needle, a one meter long flexible shaft and a motor drive with a swivel head and on/off switch. Wired for 230 V. Single phase, 50 Hz. civil lab equipments manufacturers
Description and Specification for Lab Tenders
Used for determining the slump of fine aggregate in the determination of bulk and apparent specific gravity and absorption of fine aggregate.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers Salient Features Specifications: the equipment comprises of -a conical metal mould1. 5 inch dia at the top, 3. 5 inch dia at the base and 2. 7/8 inch in height. A metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 inch in diameter. civil lab equipments manufacturers
Description and Specification for Lab Tenders
This is for use while casting a cement briquette. Salient Features Specifications: The standard spatula consists of a steel blade, of a special shape. A wooden handle is fixed to the stem of blade. The weight does not exceed 340gms. civil lab equipments manufacturers.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers
Description and Specification for Lab Tenders
This is used for compacting concrete into cube moulds. This rod is made of steel. It is 16mm diameter, 60mm in length and rounded or bullet shaped at one end. civil lab equipments manufacturers.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers
Description and Specification for Lab Tenders
Made of steel this is 40cm long, having a ramming face of 25mm SP. Other end has a grip, weight approximate 2 kgs.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers
Description and Specification for Lab Tenders
Specifications Weight approximately 210gm. Best quality with hardwood handle Blade length approx. 200mm. civil lab equipments manufacturers.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers
Description and Specification for Lab Tenders
Specifications 100 to 150mm long steel blade with straight edges. civil lab equipments manufacturers.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers
Description and Specification for Lab Tenders
Also Called Mould Vibrator Or Mortar Cube Vibrator Concrete moulds are easily cast by using a tamping bar or a vibrating table.Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers However air tapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. This is achieved in a vibrating machine. Vibration machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and rapid hardening Portland cement, low heat portland cement, portland bleast furnace cement and high alumina cements. Salient Features Specifications: The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an intergral bottom part of the frame. The center of gravity of the assembly is brought to the center of the eccentric shaft or within a distance of 25mm mould. The frequency of vibration is 12000 400 vibration per minute. Supplied complete with on 7.06cm cube mould with loose base plate, a time switch 0-5mins x 1min and certificate of vibration from a standard laboratory. Spares : Set of Springs, Belt and Belt guard. civil lab equipments manufacturers
Description and Specification for Lab Tenders
Vibrating Table.
The Vibrating Table is used for compacting concrete cubes and cylinders. Salient Features Specifications: It is designed to carry a load of 140 kg.
Cement and Concrete Testing Lab equipment manufacturers, exporters and Cement and Concrete Testing Lab suppliers The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied steplessly between a maximum of 3600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor, suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.supply. Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available. civil lab equipments manufacturers
Description and Specification for Lab Tenders
Concrete Drum Mixer.
Description and Specification for Lab Tenders
Electrical Sieve Shaker.
Electrical Sieve Shaker - (Soundless) Vibration type cast iron body. Electrically operated Fitted with FHPElectric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 6 test sieves of 20cm.dai(without test sieve and time switch.) Adaptor for 30 cm dia test sieves . civil lab equipments manufacturers
Soil Testing Lab equipment manufacturers, exporters and Soil Testing Lab suppliers
