LAB TIGER

Dlf Industrial Area, Faridabad, Haryana

The carbon black content in any product is determined using the carbon black content apparatus. It is used on products like polyethylene and other plastic products. The test conducted by this apparatus is meant to detect the amount of carbon present in the material in its free state. The instrument is widely used in plastic and PET industries.

Carbon black content apparatus is used to determine the percentage of carbon black content in polyethylene and other plastic materials. The test is performed on the materials in which carbon is presented in a free state. As per the standard test methods, the percentage of carbon content in samples is measured by calculating the difference in the mass of test sample before and after the test procedure takes place in the machine. The laboratory test machine is designed and manufactured keeping in mind certain test methods like IS2530, IS 4984 and ASTM D-1603 to determine the content of plastics.

The test procedure is very important and protective to perform. It is widely used to check the efficiency of polyethylene materials. It helps to determine the test specimen in a static atmosphere in accordance with its gravimetric difference. The glass of the lab instrument is designed and constructed using a highquality alloy to maintain the untimely fusions. The temperature of the machine is controlled by built-in electronic controllers to avoid practically for better temperature stability.

Carbon Black Content Apparatus is equipped with a tubular furnace made up of mild steel material. The temperature range of the furnace can be set maximum up to 1150 C. The relatively low wattage of the heater implicates the durability and long life of the furnace. Moreover, it is designed with a PID controller that drive the temperature in the allowable limits of +/-5.
The apparatus is incorporated with a nitrogen flow meter along with the set of glass parts. Apart from this, there are two flasks that firmly hold the solid ice. The machine is supplied along with the combustion boat and tubes which are made of quartz glass. The properties of quartz glass is much better than borosil glass that easily bear the temperature

Features:

• Provided with two separate glass flasks.
• The instrument is equipped with a programmable P.I.D. Controller.
• It is designed with quartz glass that resist high temperature.
• Low operating voltage ensures the longevity of the furnace.

Specification:

• Furnace Size is 6 x 6x 6.
• The temperature range is from ambient to 1150C.
• Inner body is constructed with Stainless Steel and the outer body is constructed with Mild Steel duly coated with powder finish.
• Additional accessories are provided with the machine like Desiccators, Glass U Tube, Combustion tube, Rubber tube 1 no., Rotometer, Combustion boat, Glass traps 3nos., Glass end caps 2 nos.
• Operated on the power supply of Single phase, 230V and 50 Hz.

Salt Spray Chamber Korrox III is a touch screen model. It is a very useful laboratory instrument which is used to determine the resistance of materials to corrosion and the effects of other environmental factors on a material before commencing the manufacturing procedure to produce best quality product. Plating on a product is done to save a product from rust and to enhance its life. To test the quality of plating that enhances the life of a product, salt spray chambers are introduced. The testing apparatus is designed and manufactured as per standard test methods to identify the effectiveness of resistive properties of a material against rust under different climatic conditions. Other models ofSalt Spray Chamberare also available -CASS cum salt spray chamberandSalt Spray Eco modelwith customized specifications.

Salt Spray Chamber Korrox III comprises of a touch screen temperature control panel on the right side of the instrument which helps the user to set the desired temperature easily. The cabinet of the instrument is designed with double walled reinforced fiber plastic duly filled with glass wool insulation. This insulation protects the chamber from corrosive environment which is created in the chamber to test the specimen. The testing instrument is provided with some standard accessories like air purging, cyclic timer, regulator, gauges, time totaliser and racks to place the specimens.

The lab testing equipment complies with ASTM B117; IS: 6910; JIS Z2371; IS: 5528; DIN50021; ISO 3768.

Features:

• The chamber of the machine has a double wall and has glass wool insulation so that any deformation could be resisted.
• There is a jar placed outside the machine for the collection of the salt solution.
• A high pressure drum is also provided with the machine.
• The pressure that comes with the instrument has a range of 0 to 30 PSI and has an air regulator along with an air filter.
• Comes with a digital controller for temperature.
• The temperature is easily regulated through the touch screen control panel.
  
• Touch screen feature
• 7 (480*234) 16.9 TFT LCDwith around 65536 colors.
• USB host for flash memory drive.
• USB 1.1 for fast transfer of data.
• Function keys.
• ARM9 32 bit CPU Complaint with IP 65 having 480*234 pixels
• 3 MB flash memory.
• 256K bytes SRAM.

Specification:

• The temperature range that can be set with this equipment lies from ambient to 600C.
• The accuracy of temperature obtained from the equipment is 10C.
• A digital temperature controller with programmable features is provided with the instrument along with a zero corrosion sensor naked PT 100.
• There is also a pressure gauge with a range of 0 to 30 psi is also provided with the instrument.

The tensile testing machine is extensively used to determine the tensile strength of various products and materials in different production verticals. The test relies on the principle of CRT, i.e. Constant Rate of Traverse. The instrument is highly stable as it designed using heavy mild steel. The high-quality instrument ensures various safety measures like overload and over travel protection. Tensile Testing Machine is available in three different models -Digital Model, Zeus UltimoandDigital cum Computerized(Eco) Wintest Model with customized specifications.

The testing apparatus is incorporated with latest technology based components to apply an assortment of tensile strength. The machine is equipped with two clamps, known as an upper clamp and lower clamp. To perform the test, the upper clamp is set to be unchanging, and the lower clamp moves with the nominated speed, which moves with the help of a motor, duly attached to the machine. Here, the lower clamp is installed mainly to move the jaw with a constant speed to estimate its tensile strength. The amazing and most useful creation ensures effortless, safe and problem-free operations.

Features:

• It is manufactured using high quality heavy-duty mild steel for better stability and higher strength.
• There are many safety measures included in the machine such as overload and over travel protection.
• A standard motor of branded quality and CE certified wiring is used in the machine.
• The modular design of the machine ensures better and trouble free maintenance.
• The machine has a rust free and elegant finish.
• The machine is available complete along with micro switches, main switch, and other essential accessories along with an instruction guide.
• The machine is highly safe and has simple operations.

• The maximum capacity of the instrument is 10- 250Kg which offers a least count of 1 gm to 100 gm respectively.

• The device is incorporated with single phase induction motor of 1/4 HP and 1440 RPM.
• The instrument consumes 0.18 KW power.
• The motor of the instrument is Worm Reduction Type.
• The digital model offers the travel length from 25mm to 700mm.
• The instrument is coated with Gray and Blue combination along with bright chrome and zinc plating to provide a corrosion resistant finish.

A hot air oven is widely used lab testing instrument that is used for sterilization of tools and equipment used in different laboratories. It uses dry heat for the purpose of cleansing. The hot air oven works on electrical supply and is provided with a fan that ensures that there is a uniform flow of heat and hot air inside the chamber. Normally, the requirement of temperature for the best level of sterilization is 1600C/hr. The oven is provided with high-quality insulation with high-quality glass wool and is meant to satisfy all the industrial requirements.

With the utilization of forced air circulation, hot air ovens are used for assessment of the effect of the aging process of different properties of the products. The physical properties of the material being tested are checked before and after the aging process for best assessment.

There are two models of hot air ovens available, namely, Digital modelandcomputerized model.

The hot air oven is a chamber with double walls. The inner walls are made from heavy gauge stainless steel and the outer walls are fabricated from mild steel of high quality. In between the walls, glass wool insulation is provided for prevention of any heat loss to the environment.

The heaters are mounted on the ribs at the bottom, and the sides of the chamber. It is also provided with a circulation fan for uniform circulation along with a hot air blower which ensures constant maintenance of required temperature inside the chamber. A port is installed inside the chamber with its openings outside. This port is used for installing the sensor. The port is also used for changing of air. The control panel that is provided at the right side of the machine aids in visual monitoring of testing procedure. There are stainless steel trays provided with the machine that can be used for placing test specimen.

Features:

• The instrument is provided with double walled chamber that is thermostatically controlled.
• There are beaded elements places below the ribs and at the bottom of the machine.
• The machine has a powder coated finish that makes it corrosion resistant.

Specification:

• The dimension of the cabinet of the oven is given as 18 x 18 x 18 inches. Customers can also request other dimensions for oven chambers.
• The temperature range that can be set inside the chamber is from ambient to 2500C.
• The power supply required to operate the instrument is single phase AC of 230 V, 50 Hz.
• The dimension of the whole machine can be given as 88 cm x 80 cm x 67 cm.
• The machine has an approximate weight of 64kg.
• The machine is provided with a PID controller for better control on the temperature and has a dual display of actual value and set value.