Mumbai, Maharashtra, India
Our Products
| Construction:The external frame work is made of thick gauge M. S plates both the exterior made of thick gauge CRCA sheets or AISI 304 sheets. in between the space, resin bonded special quality fiber glass heat insulation slabs are provided. safety guards for fan blade & heaters are provided. The interiors is painted with heat resistant aluminum paint. The exterior is spray painted with silver gray gloss paint, Inner Chamber - CRCA or AISI 304, Outer Chamber - CRCA or AISI 304. Fan & Motor :According to models doors are provided with smooth moving hinges, latch catch & sealing gaskets. Well balanced large propeller type fan (S) fitted inside the chamber with suitable shaft & dual bearing with Electric motor (S) drive. Heaters :'U' type tubular heaters are provided inside the chamber for maximum heat transfer. Steam heated models are fitted with finned type steam radiators. Controls Panel : Control Panel box consists of contactor assembly, On & Off switch, Digital Controller neon lamps, operating push buttons are incorporated in the control Box. Damper :Adjustable exhaust Damper with an arrangement for pre-filtration, in the air inlet. Optional :GMP models / complete S.S unit. Trolleys & Trays supplied as per requirement. Microprocessor based temp. Control with printer interface (Centronic PC interface with RS 232 CPC / RS-485 for networking of controllers. Profile controller for Ramp / Soak cyclic applications. Safety Features :Built-in temp. deviation audio visual alarm. Safety thermostat for over shoot temp. cut off circuit to cut off the whole systems in case of malfunction. (only applicable to Microprocessor based models). Validation :IQ OQ PQ & DQ Protocols with complete documentation & certification traceable to National & international Standards. Steam Heated Models :These are provided with finned tubular steam coils instead of /in addition to heaters, along with solenoid valve. |
We haved specialized in sphere of MFG. a wide range of High Temp. Oven that are triple walled & fabricated with heavy gauge M.S.& S.S sheet further the inner surface can also made in M.S. or S.S.
| Technical specifications | |
| Ovens are triple walled. | |
| Inner chamber made of either M.S. or S.S.304 | |
| Gap between the two walled filled with ceramic insulation to avoid heat of loses with insulation of 150 mm. | |
| Heating Element are made of special type Air heater of S.S. U Type tublar heater. | |
| With special type of wirring connection from out side body. | |
| Supplied with air draft motorized blower to circulate uniform temp. Thought out chamber temp. Range 50 C to 400 C with accuracy of 2 C controlled by digital temp. Controller cum indicator. | |
|
||||||||||||||||||||||
This industrial oven is specially designed as per guideline of GMP supplied with IQ, OQ & PQ Document with caplibaration report for PID Controller.
| ||||||||||||||||||||||||||||||
|
We offercryostat baththat provides a simple and reliable solution for obtaining consistent results. Available in varied confioguration and specific requirement of our clients, below mentioned are the technical details of our products:
| Order Code | Capacity | |
| Cu. ft | Ltrs | |
| BTI - 3a | 3 cft | 90L |
| BTI - 3b | 6 cft | 180L |
| BTI - 3c | 10 cft | 300L |
| Also known as Environmental Test Chambers /Humidity Control Ovens Double Walled Inner SS Outer MS 3" Gap Puff insulation; Full length inner glass door for clear inner vies Outer metal door with magnetic gaskets & lock. Forced air circulation for uniform temperature throughout the chamber. Dual display preset electronic digital Temperature controller Cum Indicator with cooling system by means of Hermetically sealed Compressor Unit coupled with evaporation Coil and Condenser. Temp. Range 10C to 60C 1C; Humidity Range 40% Rh to 90% Rh 3% Rh. |
Our vertical laminar air flow has vertical direction flow and particle retention above 0.5 micron. These are appreciated for their low noise and versatile usage. These have been designed with latest technology and can also be designed as per the specifications, provided by our clients.
Application:The vertical laminar air flow cabinets is designed to provide a high degree of protection for process products In laboratories and production facilities. Many critical applications in the medical, pharmaceutical, nuclear-power, and micro electronic fields demand an ultra-clean work environment which is free from biological and particulate contamination.
| Operation:Ambient Air is draw in through pre-filter and is introduced in the work zone through the HEPA filter. The average velocity in the work zone is maintained between 0.4 and 0.5 m/s. Air cleanliness in the work zone is better than class 3.5 (100) in accordance with US FED STD 209 E |
| Construction: The cabinets are fabricated out of thick board duly sunmica clad or mild steel cabinet duly epoxy coated. The work table is made of thick board which is sunmica clad at top or S. S Table top will be provided as optional accessories. All joints are sealed with silastic sealant. Side panels are provided of thick transparent acrylic sheets. The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.997% with hot, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced. Blowers are mounted on vibration isolation mounts to minimize vibration. The working is illuminated by fluorescent lightings fitted to the unit. Height of the working table provides comfortable Sit Down working position for the operation to work on 220/230 volts AC. supply |
We manufacture and supply digital oil bath. Double walled outer mild steel and stainless steel & Inner S.S.304 argon welded digital oil bath is supplied with thermostat. Temp. ranges from 50 C to 300 C 5 C.
| Cap in Ltr | Size in inches | Rating watts |
| 2 Ltr | 8"x8" | 1200 |
| 5 Ltr | 10"x10" | 1500 |
| 10 Ltr | 12"x12" | 2000 |
| 20 Ltr | 20"x20" | 3000 |
| It is light weight and fast heating equipment. | |
| Most useful for Ashing, Fasions, Igninting and heat trealing of small parts in chemical, Industtrial fields, colleges. | |
| Out side body made up heavy guage M.S / G.I duly powder coated Inner muffle with high Temp. Insulating material. | |
| Maximum Tempratures 1000 degree c / 1200 degree c & working temperature 930 degree c / 1130 degree c. | |
| Temp. controlled by Digital Temprature Controller cum Indicator. | |
| Heating elements made up of kanthal wire would extremely on the muffle. | |
| Control panel fitted on top of the units with indicating Lamps & Switches. | |
| A Uniform heat distribution through all 4 side with kenthal wire. | |
| A special solid state silver fuse for protection to elements in case of over heating. | |
| Operates on 230 Volts A.C only. | |
| Various Sixe available. |
| Size | Ratting watts (1000 degree c) |
Ratting watts (1200 degree c) |
| (9" X4" X4") 23*10*10 Cm | 1500 | 2000 |
| (10" X5" X5") 25*13*13 Cm | 2000 | 2500 |
| (12" X6" X6") 30*15*15 Cm | 3300 | 3500 |
| (18" X9" X9") 45*23*23 Cm | 6000 | 7000 |
| ||||||||
| ||||||||
| Our collection of scientific instrument comprises laminar air flow, filter holder, environmental test chamber, cryostat baths/ recirculators, horizontal laminar air flow. We are supported by a team of talented and dedicated personnel, engineers, quality analysts, administrative staff, packaging personnel, R&D experts etc who work relentlessly to provide the best of quality products to you. |
| We are a leading manufacturer and supplier of Laminar Air Flow. These instruments are reckoned for their superior quality, low power consumption and reliable functionality for a longer period of time. Further, we are also striving hard to fulfill our future plans of expanding our business, provide improved models at reasonable prices and venturing into export. |
| It is usable to estimate the Melting Points of chemicals, Pharmaceuticals, Food Etc. | |
| This is very useful to determine the melting point of any substance. | |
| Max Temp. upto 350 degree c. Consist with aluminium cylindrical block of heating. Radial holes admits a thermometer and glass capilary. | |
| Temp. controlled by energy regulator. | |
| Regulator fitted to the unit and with high, low heat switch. |
