Mumbai, Maharashtra, India
Our Products
Industrial Ovens & Furnaces
2 Products availableClean Room Equipment
2 Products availableIndustrial Ovens
1 Products availableLaboratory Equipment
1 Products availableLab Instrument
1 Products availableMeasuring Instruments & Equipment
1 Products availableCosmetics, Hair Care & Beauty Products
1 Products availableLeading Manufacturer, Supplier & Retailer of Rectangular Water Bath, Bacterological Incubator, Memmert Incubator, Environmental Test Chamber and Constant Temperature Water Bath.
| Size | Rating Watts | Holes |
| 35 x 25 x 10 cm | 1000 | 6 Hole of 3"Dia |
| 40 x 30 x 10 cm |
| Bactriological Incubators are sturdy double walled units. | |||||||||||
| Inner chamber made of S.S and outer made of mild steel with Powder caoting. | |||||||||||
| Gap beetween the walls fitted with glass wool insulation to avoid heat loses. | |||||||||||
| Heating elements are maade of high grade crome plated nicrome wire. | |||||||||||
| Temp. is controlled by thermostat. | |||||||||||
| Temp. range 5 degree c above ambient to 60 degree c and Accuracy :+- 2 drgree c. | |||||||||||
| Air ventilations are placed on top of both sides to remove hot gases / fumes. | |||||||||||
| In memmert type units heaters placed at the right and left side of inner chamber. | |||||||||||
| All the control switches & pilots lamps are fitted on the front panel. | |||||||||||
Trays should be supplied with G.I wire mesh.
| |||||||||||
|
|||||||||||||||||||||||||||
| Our company has specialized in the sphere of fabricating a wide range of Memmert Incubators that is sturdy in construction & durable. We used high grade raw materials that is procured from the renowned vendors of the country for the mgf. process for ensuring high efficiency of the memmert incubators. Available in different sizes, we can also customize these incubator as per the requirement of Clients.
| |||||||||||||||||||||||
|
||||||||||||||||||||||||||||
Leveraging on our dexterous workforce, we offer environmental test chamber, which is developed from leak proof materials. Known for their durability and reliability, our test chamber are available in the following standard sizes:
| S. No. | Size in Cms. |
| 1 | (45 x 45 x45 Cm.) |
| 2 | (71 x 45 x45 Cm.) |
| 3 | (85 x 50 x50 Cm.) |
| 4 | (100x90x90 Cm.) |
| Features | |
| Double walled in construction. | |
| Inner chamber and lie made of Stainless Steel. Outer chamber made of Mild Steel with powder coating. | |
| Glass window is fixed on the front for both sides clearobservation while immersion test. | |
| The gap between the chamber filled with high grade glass wool to minimise the heat loss. | |
| Temp. Range from ambient to 100 degree c and temp. Controlled by digital temp. Indicator cum controller with an accuracy of +- 0.5 degree c. | |
| A high speed stirrer with a motor of 1/20 HP is fitted to the unit for continous stirring and this can maintain a uniform heating throughout the chamber. | |
| The heating mechanism comprises of set of heaters pertaining to fast heating to operated 230 volts AC only. | |
| Designed for immerssion requirements and for external Circulation to maintain constatnt temp. | |
| To Operated 230 Volts AC only. | |
Our GMP model, Laminar air flow chambers are available in Vertical as well as Horizontal Models and used where high-tech manufacturing and assembly takes place and thus widely found in semiconductor assembly, biotechnology, pharmaceutical, aerospace, food, medical devices and hospitals. These Laminar air flow chambers are tested on various quality parameters to ensure smooth functioning and manufactured with Class 100 airflow in the work region in accordance to US FED STD 209.
| ||||||||||||||||||
| |||||||||||||
| Circulation: Efficient motor of 1440 RPM top mounted is installed for stirring to get temp uniformity. | |||||||||||||
| Heaters: S. S. tubular heaters for maintaining of temp. Refrigeration System: Hermitically sealed compressor provides temp. for below ambient conditions, Double stage compressors with cascade system for Temp. -40C / -70C, Refrigerant CFC Free. | |||||||||||||
| Temp. control: Digital temp controller housing all the controls, switches with PT-100 sensor. | |||||||||||||
| Option: Models available as per GMP/Complete S.S unit, Microprocessor based PID temp. control with printer interface, RS 232 CPC / RS 485 interface for multiple networking of controller. Validation: Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificates traceable to national & International Standards. | |||||||||||||
| Safety Features: Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction. (Applicable to based models only) HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor. | |||||||||||||
| Special care: A suitable K. V. A. Servo Controlled Voltage Stabilizer is recommended. |
| Features | |
| Double Walled unit. | |
| Inner chamber and top lid (pyramidal) made of S.S | |
| Outer chamber made of M.S with powder coating. | |
| Gap between the walls filled with glass wool insulation to avoid the heat loss. | |
| The inner chamber heated with immersion type heating elements is covered. | |
| Temp. range 5 degree c above ambient to 60 degree c with Accuracy: +-2 degree c. | |
| Long costing heting elements. To operates on 230 volts A.C. Only. | |
|
||||||||||||||||
| |||||||||||||||||||||||||||
| Validation Protocols :IQ OQ & PQ Documentation with calibration & Tradability certificate of controller Safety Care :Built in temp deviation audio visual alarm. Safety thermostat for over shoot temp. Cut off system HRC fuses for compressor heater & main, time delay circuit for safety of compressor. | |||||||||||||||||||||||||||
| We are engaged in the sphere of manufacturing a wide range of laboratory incubators that are manufactured with latest technology by using high grade raw material. These are appreciated all over the world for their efficiency and smooth functioning. Our range includes laboratory bacterogical incubators, memmert incubators, bod incubators gmp model, orbital shaking incubators, bacterogical incubators gmp model and tray dryers. |
We are a leading manufacturer and supplier of Water Bath. These instruments are reckoned for their superior quality, low power consumption and reliable functionality for a longer period of time. Further, we are also striving hard to fulfill our future plans of expanding our business, provide improved models at reasonable prices and venturing into export.
| ||||||||||||||
| BTI 8a | 9 x 250 ml |
| BTI -8b | 16 x 250 ml |
| BTI -8c | 20 x 250 ml |
| BTI -8d | 36 x 250 ml |
| BTI -8e | 9 x 500 ml |
| BTI -8f | 16 x 500 ml |
| BTI -8g | 20 x 500 ml |
| BTI -8h | 36 x 500 ml |
| ||||||||||||||||||||||
