Kynrem Technology Private Limited

Kolkata, West Bengal

• MOQ 1000 Litre
• FormGranules
• ColorBlack
• Applicationiron removal in water treatment
• Bulk Density1390 Kg/M3
• BrandKT-20
• MaterialCoated Mno2
• Particle size0.3/2.0 mm
• Operating temperature100 F/38 C
• Specific Gravity2.0 gm/cc
• Country of OriginMade in India
• Mesh Size0.8-1.2 MM
• Packaging Detail25 Kg Bag

KT-20 is an efficient and high performance media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity feed or pressurized water treatment systems. TM KT-20 filter media acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in the ferrous bicarbonate state due to TM the excess of free carbon dioxide and is not filterable. KT-20 , acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++ to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. PHYSICAL PROPERTIES: Color: Black Bulk Density: 35-40 lbs./cu. ft. ·Particle Size : 0.8 - 1.2 mm Specific Gravity: 2.0 gm/cc Effective Size: 0.9 mm Uniformity Coefficient: 1.7 CONDITIONS FOR OPERATION: water temp: 100°F/38°C Water pH: 6.8-9.0 Dissolved Oxygen : 15% of iron & 29% of manganese content. Bed depth: 30-40 in. Freeboard: 40% Backwash rate: 10-12 gpm/sq. ft. Service flow rate: 3.5-5 gpm/sq. ft   Additional Information: Delivery Time: Immediately Packaging Details: 30 Kg per Bag HDPE Bag

• MOQ 2000 kg
• Brand NameAC-KT
• ColorBlack
• ApplicationWater filtration
• TypeGranular (GAC)
• Size4 x 8, 8 x 16, 16 x 32, 20 x 40
• Shelf Life24 months
• pH Value7
• Iodine Value850 IV
• Moisture %3%
• Country of OriginIndia
• Ash Content7%
• Purity %99%
• Model NumberAC-KT

• MOQ 10000 kg
• Brand NameKTPL
• FormGranules
• ApplicationWater Treatment,Used For Filtering Water
• TypeAnthracite Coal
• Volatile Material1.0
• Size3 mm
• Packaging Size25Kg
• Fixed Carbon85%
• Sulphur Content0.25

Anthracite is an excellent filter media for water clarification in drinking or industrial use, when used in combination with filtering sands. It is one of the most used filtering media. It is a good complement for the mixed filters, in company of sand or green manganese sand. Due to the special shape of its grains, it allows the suspended particles to be retained in the depth of the filtering bed. Compared to a sand filter, this filtering medium allows a higher flow, less pressure drop and a better and faster backwash. Physical Properties: Color: Black Bulk Density: 50 lbs./cu. ft Hardness: 3.0-3.8 (Mohs scale) Uniformity Coefficient: <1.7 Acid Solubility: <1% Caustic Solubility ((1% NaOH @ 190°F)) : <1% Apparent Specific Gravity: 1.6 gm/cc Meets AWWA Standard B100-01 Mesh Size : 0.6 x 0.8 mm , 0.85 x 0.95 mm, 1.70 x 2.05 mm Conditions For Operation: Bed depth: 24-36 inches Freeboard: 50% of bed depth (min.) Service flow rate: 5 gpm/sq. ft. Dissolved Oxygen (D.O.) content must be equal to at least 15% of the iron and 29% of the manganese content. Backwash flow rate: 18-25 gpm/sq. ft Packaging Size: 30kg(66lb) Advantages The shape of particles allows suspended particles to be retained over the depth of the filter bed It complements mixed filters very well, particularly Green and Manganese Sand filter media Allows for higher flow rate compared to sand Smaller pressure drop compared to sand Faster backwash rate compared to sand High resistance to a variety of chemicals Greater physical strength for use in industrial water purification. Prevents filtration blockage and more. Prevention of mad ball forming at the surface of the sand layer. Can easily transform from Single Media Filtration to Dual Media Filtration (sand).  

• MOQ 10000 kg
• Brand NameGreensand KT
• ColorBlack
• ApplicationManganese & iron removal in water filtration
• FormGranules
• Mesh Size16X36
• Grain Size0.3 - 1.0 mm
• Bulk Density1425 Kg / M3