Mumbai, Maharashtra, India
Our Products
RANGE15 NB UP TO 100 NB IN 2000 LBS , 3000 LBS , 6000 LBS & 9000 LBS , 150 LBS , 250 LBS. FORM ::SOCKET WELD FITTINGS :: ELBOW 90 DEG , CROSS , TEE , ELBOW 45 DEG , COUPLING , HALF COUPLING & CAP
| Stainless Steel |
| ASTM / ASME SA 182 F304 , 304L , 304H, 309H, 310H , 316 , 316H , 316L , 316 LN , 317 , 317L , 321 , 321H , 347 , 347 H |
| Nickel Alloy |
| ASTM / ASME SB 564UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 160UNS 2201 (NICKEL 201 ) ASTM / ASME SB 472UNS 8020 ( ALLOY 20 / 20 CB 3 ) |
| Nickel Alloy | |
| RANGE : 15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS FORM : SEAMLESS / ERW / WELDED IN ROUND & SQUARE . | |
|
| Stainless Steel |
| RANGE15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS FORMSEAMLESS / ERW / WELDED IN ROUND & SQUARE . |
| Stainless Steel |
| ASTM / ASME SA 312 GR. TP304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316TI , 316H , 316 LN , 317 , 317L , 321 , 321H , 347 , 347 H , 904L . ASTM / ASME SA 358 CL 1 & CL 3GR . 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316H , 321 , 321H, 347. |
| Seamless Stainless Steel Pipes & Tubes | ||||||||||||||||||||||
| Introduction and Scope |
This covers straight cold drawn seamless ferritic, austenitic alloy steel, boiler, superheater and heat exchanger tubes. | |||||||||||||||||||||
| Materials | Material is ordered to comply with the requirements of ASTMA – 213 in grades 304, 304L, 304H, 316, 316L, 321, 347, 410 & 430 grades regularly. Special grades can be made as per customer’s requirements. | |||||||||||||||||||||
| Size Range | OD: 6.35 mm to 101.60 mm Thickness: As per customer specifications Length: As per customer specifications |
|||||||||||||||||||||
| Process Of Manufacture | The tube is manufactured from selected mother hollow pipes of required size and grade. These are manufactured by cold drawing process. All tubes are then annealed to a minimum temperature of 10500C, straightened, pickled and passivated, end finished and 100% tested in accordance with ASTM A 450. | |||||||||||||||||||||
| Tolerances |
|
|||||||||||||||||||||
| Test | Normal: Tensile strength , Yield strength, Elongation Flattening, Hydrostatic Pressure test Optional: Pneumatic / Air leakage, Eddy Current , IG Corrosion |
|||||||||||||||||||||
| Marking | All pipes are marked as folows: ASTM A-213, Garde, OD, Thickness, Heat No. |
|||||||||||||||||||||
| Standard Weight Chart for Seamless Stainless Steel Pipes & Tubes | ||||||||||||||
| Sl no. | Outside Dia | Wall Thickness (in mm) | ||||||||||||
| Inch | MM | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1 | 1.2 | 1.5 | 1.6 | 2 | 2.5 | 3 | |
| 1 | 1/4" | 06.35 | 0.073 | 0.087 | 0.099 | 0.111 | 0.122 | 0.133 | 0.154 | |||||
| 2 | 3/8" | 09.52 | 0.113 | 0.134 | 0.155 | 0.175 | 0.194 | 0.212 | 0.250 | |||||
| 3 | 10.00 | 0.119 | 0.141 | 0.163 | 0.184 | 0.205 | 0.225 | 0.262 | ||||||
| 4 | 1/2" | 12.70 | 0.153 | 0.182 | 0.210 | 0.238 | 0.266 | 0.293 | 0.345 | |||||
| 5 | 5/8" | 15.87 | 0.192 | 0.229 | 0.265 | 0.302 | 0.337 | 0.372 | 0.441 | 0.540 | ||||
| 6 | 3/4" | 19.05 | 0.232 | 0.277 | 0.321 | 0.365 | 0.409 | 0.452 | 0.536 | 0.659 | ||||
We are Specialized inMagnetic Sheetsin Grade of 409N, 410S, 410, 420, 430, 431 User Industries:Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.
Product Range:The following table represents size range, product standards and material grades of Sheet, Plates & Coils
| Copper Alloy | |||
| RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL. | |||
| Copper AlloyASTM / ASME SB 162UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 ) ASTM / ASME SB 127UNS 4400 (MONEL 400 ) ASTM / ASME SB 424UNS 8825 (INCONEL 825) ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 ) ASTM / ASME SB 443UNS 6625 (INCONEL 625) ASTM / ASME SB 574UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 462UNS 8020 ( ALLOY 20 / 20 CB 3 ) |
| Duplex Steel | ||||
| RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL. | ||||
| ||||
| Carbon & Alloy Steel | |||||||
| RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL. | |||||||
| |||||||
We also stock Bar, Hexagon, Square, Round products in various dimensions and grades.
We trade of , carbon and alloy specialty steels supplied in the as rolled, annealed and normalized conditions. We offer cut to size and heat treatment through our service center. User Industries:Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal. Product Range:The following table represents size range, product standards and material grades of Round Bars.
| Copper Alloy | ||||
| RANGE3.17 MM TO 350 MM DIA | ||||
| ||||
| Duplex Steel | ||||||||||||||||||
| RANGE3.17 MM TO 350 MM DIA | ||||||||||||||||||
| ||||||||||||||||||
Pipe flange gaskets are used for improved joint performance. They are considered much more superior than the conventional ring or full-face gaskets. Although pipe flange gaskets are usually used for all normal water and sewer service, they are especially useful in demanding services like in very large diameter flanged piping. For specially designed long-span installations, involving 2 or 3 or more lengths of pipe or with any underground flanges, flange gaskets are of great help because they could be subjected to undesirable beam loading. These gaskets are available in numerous standard materials in various thickness and hardness options for various flange sizes. Flange gaskets are also available with adhesive on one or both sides or without adhesive. Most materials are available starting at 1/32 thick and can be supplied up to 1 thick. Some manufacturers supply flange gaskets in wide rolls from which you can cut your flange gaskets to size. Flange gaskets are also available to your exact requirements. Pipe flange gaskets are being very frequently used for flanged joints which are subjected to extreme chemical attacks. Materials used: Flange gaskets are made of various materials like: Rubber:Neoprene, EPDM, Nitrile, EVA, Silicone, Cork and Cork Rubber Closed Cell Foam:Cross-linked Polyethylene, PVC Plant Fiber Cellulose FiberMetal:Steel, Stainless Steel, Aluminum, Copper, Cast iron etc.
A pipe bending machine is vital component for any pipe bending project, particularly those of a large scale. A pipe bending machine makes the job easier and is capable of completing multiple jobs in less time than when working by hand. A pipe bending machine can be either handheld or floor mounted. In either case, the pipe bending machine allows the user to hold the pipe at one end of the channel while the shape roller forces the pipe through and carries it around in a curve. A pipe bending machine can be purchased with a variety of pipe bending capabilities.
Material:A234-WPB A234-WP12 A234-WP11 A234-WP5 A403-WP304 A403-WP304L A403-WP316. A403-WP316L A420-WPL6, Ceramic Lined Special alloys:cooper nickel, Ni-based, Cu-based, Co-based, Fe-based Size:Outer Diameter (D): D
Pipe reducer are tube fittings that are widely used in a number of industries in order to providing greatest connection flexibility in connecting fractional tubes in various installations. Pipe reducer is a kind of pipe fitting that joins two pipes of different diameter. The pipe reducers are available in a range of materials depending on the end use of the products and these fittings are manufactured in inch and metric size.Pipe reducers are special type of tube fittings that are commonly used in the demanding environments of chemical and power plants. They provide a highly reliable, sturdy and tight integral line system and these type of pipe fittings remain unaffected by shock, vibration or thermal distortion. These pipe fittings are very easy to install and they resist leakage due to thermal or pressure cycling. These reducers are sometimes chrome or nickel coated to prevent corrosion and increase the life of the product. AnEccentric reducer, also called aBell reducer, has two female (inside) threads of different sizes with centers so designed that when they are joined, the two pieces of pipe are not in line with each other, but they can be installed so as to provide optimum drainage of the line.
Description:
Stainless steel:ASTM A403 WP304/304L, WP316/316/L, WP321, WP347 and WPS31254Pressure:SCH5 to SCH160Standard:ANSI B16.9/B16.28 and MSS SP-43/SP-75Size range:1/2 to 56inchesEnd Bevel:According to the bevel of welding pipe fittings constructionSurface treatment:Shot blasted, rust-proof black oilPacking:Plywood Case/ Pallet/ otherUses of pipe reducer:A pipe reducer serves the two basic purposes:Changing the piping diameterHandling the expansion, misalignment or vibration problem
Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also called Lap Joints and Vanstone Flared Laps. A rotating back up flange seats itself against the back surface of the Stub End. When bolts are added, the clamping action of the bolts presses the rotating back up flange against the back of the Stub End. The gasket surface of the Stub End then presses against a gasket and another gasket surface providing joints like standard flange joints. The seal is made by the gasket surface of the stub end alone, the flange only provides the clamping pressure on the joint.Our high quality stub ends (Butt weld fittings ) are tested and verified for durability, accuracy and precision. The stub ends are manufactured in all standard dimensions. The stub ends are provided with a standard weld bevel and can be available in squared, flanged, victaulicand threaded ends. We offer stub ends at highly competitive prices. Material:A234-WPB A234-WP12 A234-WP11 A234-WP5 A403-WP304 A403-WP304L A403-WP316. A403-WP316L A420-WPL6, 316L, 304L, 321, 321H. Size:1/2" - 24" Types:Type A, Type B, Type C, Type D Manufacturing standard:ASME/ANSI B16.9, JIS, DIN, EN, API 5L, etc. Surface treatment:Shot blasted, rust-proof black oil Usage:Petroleum, Chemical, Power, Gas, Metallurgy, Ship-building, Construction, ect. Packing:Plywood Case/ Pallet/ other
PLAIN END PIPE, BOILER & TUBING The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc. They are also fitted on water pump lines with the sole purpose of removing air blocks. Pipe caps are highly demanded as an important category of pipe fittings.Fabricators of all types and grades of pipe have used our caps to protect ends and keep out dirt and other foreign material. Pipes capped with Wedge end caps arrive at the project site in perfect shape and ready for installation. Material:A234-WPB A234-WP12 A234-WP11 A234-WP5 A403-WP304 A403-WP304L A403-WP316. A403-WP316L A420-WPL6, 316L, 304L, 321, 321H. Size:1/2" - 24" Manufacturing standard:ASME/ANSI B16.9, JIS, DIN, EN, API 5L, etc. Surface treatment:Shot blasted, rust-proof black oil Usage:Petroleum, Chemical, Power, Gas, Metallurgy, Ship-building, Construction, ect. Packing:Plywood Case/ Pallet/ other
Hydraulic tubes, Hydraulic pipeline, cylinders Pneumatic cylinders, U tubeCarbon Steel U Bend Tube are used in varied industries.The use of premium quality steel in the manufacturing of the CS Tube ensures high durability, tensile strength and resistivity to adverse conditions. Meeting the exact specifications and drawings provided by the clients. Additionally, customers are eased with the availability of the Copper Steel Tubes in varied finishes, length and diameters meeting the requisites of the applications.Our bead removal tubes are highly popular for structural purposes and mechanical & general engineering purposes. Made of high quality metals, our bead removal tubes are demanded in both the domestic and International markets. They can also be customized as per clients specifications. Material:TP304, TP304L, TP316, TP316L, TP321, TP310S, TP347H, TP316Ti and so on. Standard:ASTM A 312/213/269, DIN 17458/2462, BS3605/1, JIS G3429/3459, ISO1129/2037/9329, GB/T14975/14976/13296 and so on.
Proces:The removal of beads is done as per standard specifications.Bead is cold worked.It is brought in level with the base metal.Before heat treatment on tube mill, bead rolling is made in-line.This will help in recrystallization of weld structure.The weld structure will also homogenize faster in annealing process.Features:Bead removal tubes improve corrosion resistance.It improves easy expansion in tube sheets and orbital welding.It also improves easy flow.There is easier cleaning and less scale deposits.Packing:Wooden cases, bundle or plastic bags, plywood boxes
| Nickel Alloy | ||||
| RANGE15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS FORMSEAMLESS / ERW / WELDED IN ROUND & SQUARE . | ||||
| ||||
| Stainless Steel | |||||
| RANGE15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS FORMSEAMLESS / ERW / WELDED IN ROUND & SQUARE . | |||||
| |||||
| S.S. Welded Pipes & Tubes | |
| Introduction and Scope |
This cover electric - fusion welded austenitic Chromium-nickel stainless steel pipe suitable for corrosive or high temperature service, both. Five classes of pipe are covered under this specification: Class 1: Double side welded using filler material and 100% radio graphed. |
| Materials | This specification covers 19 grades of material steel. The plate material comply with the requirements of ASTM A - 240. Most commonly manufactured grades are 304, 304L, 304H, 316, 316L 310. |
| Size Range | OD: 8" NB (219.08 mm) to 36"NB (914.04 mm) Thickness: NB Size in Schedule 5, 10, 10s, 40, 40s Length: As per customer specification. |
| Process Of Manufacture | The pipes are manufacutred from levelled plates which are edge bevelled and progessively "O" formed on hydraulic presses. The edges of the pipe are either manually TIG welded or continuously welded on Track and Boom. Weld portion is radiographed as per requirements. Annealing of pipe is carried out on continuous furnace. Pipe is further straightened, sized, end finished, pressure tested, pickled and passivated, marked and packed. |
| Tolerances | OD: +/- 0.5% of specified diameter based on circumferential measurement.
Thickness: Minimum thickness at any point not more than 0.3 mm under nominal Thick. Out of roundness: Difference between maximum & minimum OD% |
| Test | Transverse bend weld tests. Transverse tension test to ASME code IX para QW 150. Hydrostatic Test ASTM A-530. Radiographic classes1,3,4 to ASME Code VIII para UW 51, Class 5 to ASME. Sec. VIII para UW 52. |
| Marking | All pipes are marked as folows: ASTM A-358, Class, Grade, Size , Schedule No., Heat No. |
| Standard Weight Chart for S.S. Welding pipe & Tubes | ||||||||||
| Sl no. | Outside Dia | Wall Thickness (in mm) | ||||||||
| SCH 5 | SCH10S | SCH10 | SCH 40S | |||||||
| Inch | MM | Thick | Kg/mtr | Thick | Kg/mtr | Thick | Kg/mtr | Thick | Kg/mtr | |
| 1 | 8" | 219.08 | 2.77 | 14.99 | 3.76 | 20.25 | 3.76 | 20.25 | 8.18 | 43.16 |
| 2 | 10" | 273.05 | 3.4 | 22.97 | 4.19 | 28.2 | 4.19 | 28.2 | 9.27 | 61.2 |
| 3 | 12" | 323.85 | 3.96 | 31.72 | 4.57 | 36.53 | 4.57 | 36.53 | 9.53 | 74.92 |
| 4 | 14" | 355.60 | 3.96 | 34.87 | 4.78 | 41.97 | 6.35 | 54.77 | 9.53 | 82.55 |
| 5 | 16" | 406.40 | 4.19 | 42.18 | 4.78 | 48.05 | 6.35 | 62.74 | 9.53 | 94.66 |
| 6 | 18" | 457.25 | 4.19 | 47.15 | 4.78 | 54.12 | 6.35 | 70.71 | 9.53 | 106.78 |
| 7 | 20" | 508.00 | 4.77 | 60.13 | 5.54 | 69.67 | 6.35 | 78.68 | 9.53 | 118.9 |
