Ahmedabad, Gujarat, India
Verified
Add Review
Our Products
Mould Release Agent for Rigid, Flexible
Additional Information:
Payment Terms : T/T
Sliplease is a solvent-based, semi-permanent mold release agent developed for FRP molding processes such as Hand Lay-up, Resin Transfer Molding and Vacuum Infusion. Sliplease 1608 is specifically developed for processes using unsaturated polyester and vinyl ester resins. It works well on both the types of molds: FRP and metal. It provides multiple releases per application.
Additional Information:
Payment Terms : T/T
sliplease is an internal release agent for pultrusion of epoxy-based resins.
a small dosage of sliplease results in a smooth release / smooth pulling of pultruded parts
without any adverse effect on the resin formulation and properties of the final pultruded part.
typical product data
color and appearance.amber colored oil
specific gravity.0.96
key performance properties
excellent internal release agent for pultrusion
thermally stable at moulding temperatures
chemically stable under mixing and moulding conditions
reduces mould cleaning frequency
does not affect physical and chemical properties of cured part
uses
internal release agent for pultrusion epoxy resins.
application methods
dosage of sliplease varies between 1.0 3.0 phr on neat resin depending on process
conditions. optimal dosage should be determined by manufacturer by experimentation. it is
recommended to start with higher dosages. sliplease should be mixed in neat resin first for
10 minutes to ensure homogenous system. remaining components of formulation (hardener, pigment,
etc.) should be added later. mixing time also depends on the viscosity of resin.
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
