Other Products / Services #5870784

Sizes Available

• 30*30 cm
• 60*30 cm
• 60*60 cm &
• On Demand Sizes

Finishes Available

• Natural
• Sawn
• Calibrated
• Tumble-Antique
• Sandblast
• Polish-Honed

Slate Physical Properties

• Slate Stone being a natural stone, there can be variation in color &shade.
• Water absorption : The capacity of water absorption is not more than 1.0%
• Hardness : Lies between 6 to 7 on moh's scale density 2.32 to 2.42 kg/m3
• Color : Slate is available in many colors – red, green, yellow, pink, gray and white.the reason for the variation in colors being the change in the percentage of
• Porosity : The porosity of slate is almost negligible. Thus slate is almost impermeable.

Slate chemical properties

The composition of slate is quite similar to that of sand, that essentially consists of quartz. The natural cementing material which binds the sand together as rock is usually composed of silica, calcium carbonate, or iron oxide. The percentage constitution of each constituent varies between certain limit, which is as follows:

• SiO2 - 93-94%
• Alumina(Al2O3) - 1.4 to 1.5%
• Iron(Fe2O3) - 1.5%-1.6%
• Lime(CaO) - 0.8% to 0.9%
• Soda(Na2O) & Potash (Kro) - 1.0% to 1.2%
• Loss On Ignition(LOI) - 1.0% to 1.2%
• Magnesia(MgO) - 0.2 to 0.25%

Sizes Available

• 30*30 cm
• 60*30 cm
• 60*60 cm &
• On Demand Sizes

Finishes Available

• Natural
• Sawn
• Calibrated
• Tumble-Antique
• Sandblast
• Polish-Honed

Slate Physical Properties

• Slate Stone being a natural stone, there can be variation in color &shade.
• Water absorption : The capacity of water absorption is not more than 1.0%
• Hardness : Lies between 6 to 7 on moh's scale density 2.32 to 2.42 kg/m3
• Color : Slate is available in many colors – red, green, yellow, pink, gray and white.the reason for the variation in colors being the change in the percentage of
• Porosity : The porosity of slate is almost negligible. Thus slate is almost impermeable.

Slate chemical properties

The composition of slate is quite similar to that of sand, that essentially consists of quartz. The natural cementing material which binds the sand together as rock is usually composed of silica, calcium carbonate, or iron oxide. The percentage constitution of each constituent varies between certain limit, which is as follows:

• SiO2 - 93-94%
• Alumina(Al2O3) - 1.4 to 1.5%
• Iron(Fe2O3) - 1.5%-1.6%
• Lime(CaO) - 0.8% to 0.9%
• Soda(Na2O) & Potash (Kro) - 1.0% to 1.2%
• Loss On Ignition(LOI) - 1.0% to 1.2%
• Magnesia(MgO) - 0.2 to 0.25%

Sizes Available

• 60 Series
• 56 Series
• On Demand Sizes

Finishes Available

• Natural
• Sawn
• Calibrated
• Tumble-Antique
• Sandblast
• Polish-Honed

Physical Properties 

• It being a natural stone, there can be variation in color & shade. 
• Water Absorption : The capacity of water absorption is not more than 1.0% 
• Hardness : Lies Between 6 To 7 On Moh's Scale Density 2.32 To 2.42 Kg/M3 
• Color : it is available in many colors – Red, Green, Yellow, Pink, Gray And White. 
• Porosity : The porosity is almost negligible. Thus it is almost impermeable. 

Chemical Properties 

Limestone is a sedimentary rock and is mainly made of calcite and aragonite, which are nothing but Calcium carbonate crystals. Limestone comprises approximately 10% of the total sedimentary rock population. The percentage constitution of each constituent varies between certain limit, which is as follows: 

• SiO2 - 93-94%
• Alumina(Al2O3) - 1.4 to 1.5%
• Iron(Fe2O3) - 1.5%-1.6%
• Lime(CaO) - 0.8% to 0.9%
• Soda(Na2O) - & Potash (Kro)1.0% to 1.2%
• Loss On Ignition(LOI) - 1.0% to 1.2%
• Magnesia(MgO) - 0.2 to 0.25%

Sizes Available

• 30*30 cm
• 60*30 cm
• 60*60 cm &
• On Demand Sizes

Finishes Available

• Natural
• Sawn
• Calibrated
• Tumble-Antique
• Sandblast
• Polish-Honed

Slate Physical Properties

• Slate Stone being a natural stone, there can be variation in color &shade.
• Water absorption : The capacity of water absorption is not more than 1.0%
• Hardness : Lies between 6 to 7 on moh's scale density 2.32 to 2.42 kg/m3
• Color : Slate is available in many colors – red, green, yellow, pink, gray and white.the reason for the variation in colors being the change in the percentage of
• Porosity : The porosity of slate is almost negligible. Thus slate is almost impermeable.

Slate chemical properties

The composition of slate is quite similar to that of sand, that essentially consists of quartz. The natural cementing material which binds the sand together as rock is usually composed of silica, calcium carbonate, or iron oxide. The percentage constitution of each constituent varies between certain limit, which is as follows:

• SiO2 - 93-94%
• Alumina(Al2O3) - 1.4 to 1.5%
• Iron(Fe2O3) - 1.5%-1.6%
• Lime(CaO) - 0.8% to 0.9%
• Soda(Na2O) & Potash (Kro) - 1.0% to 1.2%
• Loss On Ignition(LOI) - 1.0% to 1.2%
• Magnesia(MgO) - 0.2 to 0.25%

Sizes Available

• 25-75 mm(2")
• 75-125 mm(4")
• 125-175 mm(6") &
• On Demand Sizes

Finishes Available

• Dry Tumbled Pebbles
• Wet Tumbled Pebbles

Colors

• All Sandstone and Limestone color.

Pebbles Physical Properties

• Pebbles being a natural stone, there can be variation in color &shade.
• Water Absorption : The capacity of water absorption is not more than 1.0%
• Hardness : Lies between 6 to 7 on moh's scale density 2.32 to 2.42 kg/m3
• Color : Pebbles is available in many colors – red, green, yellow, pink, gray and white.
• POROSITY : the porosity of pebbles is almost negligible. Thus pebble is almost impermeable.

Pebbles chemical properties

Pebbles are small roundish decorative stones, either machine tumbled or natural. These pebbles are mostly used in homes, gardens, artificial ponds, parks and in other indoor and outdoor areas.

• SiO2 - 93-94%
• Alumina(Al2O3) - 1.4 to 1.5%
• Iron(Fe2O3) - 1.5%-1.6%
• Lime(CaO) - 0.8% to 0.9%
• Soda(Na2O) & Potash (Kro) - 1.0% to 1.2%
• Loss On Ignition(LOI) - 1.0% to 1.2%
• Magnesia(MgO) - 0.2 to 0.25%

Sizes Available

• 30*30 cm
• 60*30 cm
• 60*60 cm &
• On Demand Sizes

Finishes Available

• Natural
• Sawn
• Calibrated
• Tumble-Antique
• Sandblast
• Polish-Honed

Slate Physical Properties

• Slate Stone being a natural stone, there can be variation in color &shade.
• Water absorption : The capacity of water absorption is not more than 1.0%
• Hardness : Lies between 6 to 7 on moh's scale density 2.32 to 2.42 kg/m3
• Color : Slate is available in many colors – red, green, yellow, pink, gray and white.the reason for the variation in colors being the change in the percentage of
• Porosity : The porosity of slate is almost negligible. Thus slate is almost impermeable.

Slate chemical properties

The composition of slate is quite similar to that of sand, that essentially consists of quartz. The natural cementing material which binds the sand together as rock is usually composed of silica, calcium carbonate, or iron oxide. The percentage constitution of each constituent varies between certain limit, which is as follows:

• SiO2 - 93-94%
• Alumina(Al2O3) - 1.4 to 1.5%
• Iron(Fe2O3) - 1.5%-1.6%
• Lime(CaO) - 0.8% to 0.9%
• Soda(Na2O) & Potash (Kro) - 1.0% to 1.2%
• Loss On Ignition(LOI) - 1.0% to 1.2%
• Magnesia(MgO) - 0.2 to 0.25%

Sizes Available

• 60 Series
• 56 Series
• On Demand Sizes

Finishes Available

• Natural
• Sawn
• Calibrated
• Tumble-Antique
• Sandblast
• Polish-Honed

Physical Properties 

• It being a natural stone, there can be variation in color & shade. 
• Water Absorption : The capacity of water absorption is not more than 1.0% 
• Hardness : Lies Between 6 To 7 On Moh's Scale Density 2.32 To 2.42 Kg/M3 
• Color : it is available in many colors – Red, Green, Yellow, Pink, Gray And White. 
• Porosity : The porosity is almost negligible. Thus it is almost impermeable. 

Chemical Properties 

Limestone is a sedimentary rock and is mainly made of calcite and aragonite, which are nothing but Calcium carbonate crystals. Limestone comprises approximately 10% of the total sedimentary rock population. The percentage constitution of each constituent varies between certain limit, which is as follows: 

• SiO2 - 93-94%
• Alumina(Al2O3) - 1.4 to 1.5%
• Iron(Fe2O3) - 1.5%-1.6%
• Lime(CaO) - 0.8% to 0.9%
• Soda(Na2O) - & Potash (Kro)1.0% to 1.2%
• Loss On Ignition(LOI) - 1.0% to 1.2%
• Magnesia(MgO) - 0.2 to 0.25%