Our Products
Audio Amplifier
2 Products availableCar Electronic Accessories
2 Products availableWoofer
2 Products availableVehicle Horn
2 Products availableComputer And Mobile Software & Apps
2 Products availableSpeaker Driver
1 Products availableAmplifier
1 Products available Input Power | 60W Rms/90W Max. |
Impedance | 16 |
Frequency Response | 160-7, 000Hz |
SPL at 1kHz | 113.5dB/1W/1m, 132dB/60W/1m |
Temperature Range | -30°to + 70°C |
Throat Coupling | 1-3/8” - 18TPI, Throat Couple No.1 |
Dimensions | ø125 x H100 mm |
Weight | 2.05kg |
Material | Die-cast Aluminium Acoustic Head (Flange)
|
Input Power | 40W Rms/60W Max. |
Power Taps | On 100V Line 250/40W, 330/30W 500/20W, 1k/10W, 2k/5W |
Frequency Response | 160-7, 000Hz |
SPL at 1kHz | 112.5dB/1W/1m 128.5dB/40W/1m |
Temperature Range | -30°to + 70°C |
Throat Coupling | 1-3/8” - 18TPI, Throat Couple No.1 |
Dimensions | ø150 x H137 mm |
Weight | 2.24kg |
Material | Die-cast Aluminium Acoustic Head (Flange) |
RF Output Power | 15mw (max.) |
Modulation Mode | FM (F3E) |
Microphone Element | Dynamic, Cardioid |
Dynamic Range | 80dB |
Frequency Response | 50-15, 000Hz |
Antenna Type | Internal dipole |
Current Consumption | ≤100mA |
Power Requirement | 3V (2 × 1.5V AA Pencil Cells) |
Controls | Transmitter ON/OFF Switch |
Indication | Green LED for indicating microphone is ON |
Dimensions | Ø55 (L248) mm |
Weight | 180g (w/o battery) |
RECEIVER | . |
Frequency Stability | ± 0.005% Quartz Crystal Controlled |
Receiving Method | Non-diversity |
Audio Output | 0-55mV/1k |
Signal to Noise Ratio | > 80dB |
Distortion | < 0.5% |
Frequency Response | 50-15, 000Hz |
Antenna | Telescopic |
Power Requirement | 240V AC 50Hz for AC adaptor (supplied along with) |
Controls | Power On/Off Switch, Output Volume Control |
Indications | Red LED for Power ON, Green LED for RF reception |
Dimensions | W230 x H42 x D150 mm |
Weight | 305g |
brand-K-audio
model-KW12-1500
power-150watt
size-12inch
magnet size-134mm
waterproof
RF Output Power | 10mW (Max.) |
Carrier Frequency Range | 630-664MHz |
Frequency Stability | ±0.005% |
Modulation Mode | FM |
Microphone Element | Dynamic, Cardioid |
Frequency Response | 50-15, 000Hz |
Power Requirement | 3V (2 × 1.5V AA Pencil Cells) |
Current Consumption | < 150mA |
Controls | POWER ON/OFF switch |
Indication | Channel Frequency Display |
Dimensions | Ø55 (L 250) mm |
Receiver | . |
Audio Output (Nominal) | Bal. 0dBu, Unbal. -10dBu |
S/N Ratio | 100dB |
Distortion | <1% |
Frequency Response | 50-15, 000Hz |
Dynamic Range | >90dB |
Power Requirement | 240V AC 50Hz from AC Adaptor (supplied along with) |
Controls | ON/OFF Switch, Volume Controls for Channel A & B |
Indications | LEDs for RF & Audio Signal of Channel A & Channel B, Channel Frequency Display |
Dimensions | W210 × H47 × D165 mm |