Pune, Maharashtra, India
Our Products
The instrument is used for various vital acceptance parameters of Piston. The parameters such as Ovality, Taper over the length and angular difference between major and minor diameter of Piston can be checked. The instrument is provided with high accuracy electronic probe, digital indicating unit and specially designed software to check the above parameters of pistons. The test data can be stored on PC.
Useful for periodic calibration of plunger type, lever type dial gauges and bore gauges. Available in imperial and metric systems.
This instrument is popularly used for checking the springs in tension and compression. Capacity 50 kg L.C.0.02 kg. The Instrument consists of precision mechanical stand, Mikrotech Force Indicator, compression plates and tension hooks. The deflection of spring under test is measured on Vernier Scale. The precision scale of Least Count 0.01 mm is also offered in lieu of Vernier scale.
We are offering gear rolling tester. Useful for checking total composite error, tooth to tooth error of helical and spur gears. Maximum center distance 100 mm and 150 mm respectively.
The Bevel Gear Tester is useful for inspection of bevel gears in double flank method. The measurement of clearance of gear flanks and detection of bearing areas, inspection of composite error and checking of assembly distances are the applications of this instrument. Maximum bevel gear diameter 140 mm. Angle adjustment of axes 50 to 140. Bevel Gears with min. assembly distance of 35 mm and Maximum assembly distance of 140 mm can be inspected.
The fully automatic Computerized and Motorized Gear Roll Tester is useful for inspection of total composite error, tooth to tooth error and Run out of gears. The test report is generated in graphical format and indicating unit shows the accept / reject results based on pre-determined entered values. The high spot pen marking attachment is also offered as per demand. This instrument is offered with our models P-1 and P-2.
The Roundness and Cylindricity Tester, Model Rondcyl 500 has been designed to meet manufacturers requirement for fast, high accuracy, simple operations and at a price that can be justified. The geometrical parameters viz. Roundness, Cylindricity, Concentricity, Co-axiality, Flatness, Perpendicularity, Plane Run Out, Parallelism can be tested. Maximum diameter 500 mm. Max. Weight: 25 kg. The instrument is operated through comprehensive user friendly software.
The instrument is used for periodic calibration of Shore A and Shore D Rubber Hardness Testers (Durometers).
The equipment is useful for checking the tangential tension of piston ring. It is equipped with a programmable Mikrotech Force Gauge and Load Cell. The Force Gauge is having excellent features viz. different measuring units, audio/visual alarm mode, PC Compatibility etc. The values of tangential load are seen on the force gauge. The suitable data storage software is available on demand. The equipment is available in various models to check the piston rings of diameter from 25 mm to 750 mm. The Force Gauges of 100, 250 and 1000 N. are available.
This mechanical model of Piston Ring Tester is also useful for checking tangential tension of piston ring. The instrument is fitted with cantilever assembly. The dial indicator mounted on the top, measures the deflection of the cantilever beam, under tangential force. The piston ring is mounted on the ring table. It is held in the metallic belt and compressed by pulling the lever down, closing the gap in the two ends of the ring to a desired value. Thus the cantilever deflects. The deflection in the cantilever is measured in the dial indicator and the tangential tension is indicated on the Dial Gage. The instrument is available in the different models: Model LTK 1 (Ring Dia 25 160 mm) Model LTK 2 (Ring Dia 40 250 mm) Model LTK 3 (Ring Dia 100 400 mm) Model LTK 4 (Ring Dia upto 700 mm).
The state of the art design in the mechanical version of Torque Wrench Tester is useful for periodic calibration of static type torque wrenches. The measuring units i.e. kgf.M, Nm and Lbf. Inches are available. Different models of the instrument to cover the torque capacity up-to 400 kgf.M. are offered. Accuracy of the instrument is 1%.
Useful for periodic calibration of plunger type and lever type Dial gauges and bore gauges. The unit can be computer interfaced with user-friendly software for statistical analysis of measured values.
