Kudale Instruments (P) Ltd.

Hadapsar, Pune, Maharashtra

we offer torque calibration rig. the high precision torque calibration test rig is the solution for periodic calibration of torque wrench testers, torque sensors. the torque tester upto 2000 nm capacity can be calibrated to meet international standards. the rig consists of precision length bar, mounting stand and dead weights mounting mechanism. the torque calibration rig meets with the requirement of different standards for calibration of torque inspection.

We are offering precision bore comparator useful for checking internal diameter, groove diameter of bore, plain internal diameter, internal tapered diameter, internal pitch diameter and internal raceway diameter of machined parts. Measuring range (diameter): 4 - 67 mm. Measuring range (height): 0 - 12 mm

We are offering check master.This instrument finds its application on shop floor as well as in the gauge room for inspection of internal diameter, outside diameter, run-out, composite error of gears, thickness etc. Parameters of machined parts. The instrument is popularly used on shop floor as a comparator for stage inspection and final inspection. We offer special tooling on the instrument as per customer requirement to meet inspection requirement of the components.

The equipment is useful for checking the tangential tension of piston ring. It is equipped with a programmable mikrotech force gauge and load cell. The force gauge is having excellent features viz. Different measuring units, audiovisual alarm mode, pc compatibility etc. The values of tangential load are seen on the force gauge. The suitable data storage software is available on demand. The equipment is available in various models to check the piston rings of diameter from 25 mm to 750 mm. The force gauges of 100, 250 and 1000 n. Are available

The scale and Tape calibration unit is useful for calibration of measuring tapes and scales. The Range of unit is 1000 mm. with the Least Count of 0.005 mm. The instrument is fitted with high precision scale and Digital Indicator. The CCD Camera catches the image of measurement line on scale or tape, under calibration and the same is displayed on small video screen.

Useful for checking Internal Diameter, Groove Diameter of Bore, Plain Internal Diameter, Internal Tapered diameter, Internal Pitch diameter and internal raceway diameter of machined parts. Measuring Range . Measuring Range .

This instrument finds its application on shop floor as well as in the Gauge Room for inspection of Internal Diameter, Outside Diameter, Run-out, Composite error of gears, Thickness etc. parameters of machined parts. The instrument is popularly used on shop floor as a comparator for stage inspection and final inspection. We offer special tooling on the instrument as per customer requirement to meet inspection requirement of the components.

This is primary model in the series of horizontal tensile testing machine, Capacity: 20 KN. The instrument is supplied with Load Cell and Digital Indicating Unit. This Mini Universal Testing Machine is popularly used for testing tensile, compressive, Shear, Flexural properties of different materials. The Load cells of capacity 0.2KN (20 KG), 2KN (200KG) and 20 KN (2000kg) are available with the above model.

With Electronic Tensometer, there is a choice of over 100 accessories & grips to cover most of the varied requirements for R & D, Quality Control in science, industries & education. Grips are available to test a variety of materials such as metals, plastics, timber, ceramics, cement, fabrics, pharmaceutical, packaging, wires & cables etc. in tension, shear, compression & bend.

The Hand held Mikrotech Force Torque Gauge has lot of applications, where push-pull force is to be checked. The models of capacity 1000, 250 and 100 Newton are available. The different measuring units such as Kilogram, Lb. Inches are available. The gauge also has PC Compatibility.

The instrument is useful for Checking the Specific Gravity of solid and liquid materials.Range 0.9 25.

The Electronic Torque Wrench Tester is useful for periodic calibration of static type Torque wrenches. The instrument is offered with Torque Transducers and multifunctional Torque Indicator. The design of precision gear box provides easy and smooth operational convenience. The 90 tilting facility meets the latest standards. The instrument is offered in different models i.e. 100 Nm, 300 Nm, 1000 Nm and 2000 Nm. We also offer higher capacity models on demand. The data storing software is available as optional accessory. Accuracy of the instrument is 1%.