Kuchhal Brothers

Rajputana Industrial Area, Roorkee, Uttarakhand

This Met Station is specially designed for Road weather monitoring applications. This system employs low power data logger system and rugged sensors for extreme road conditions. The system uses 12V operating voltage with a SLA battery backup while energy is harvested from a 12V/40W solar panel. Ethernet Interface is provided for Real time sensor monitoring. A stainless steel tripod stand is offered along with this system for robust mounting of data logger enclosure and sensors.

This Met Station is specially designed for Road weather monitoring applications. This system employs low power data logger system and rugged sensors for extreme road conditions. The system uses 12V operating voltage with a SLA battery backup while energy is harvested from a 12V/40W solar panel. Ethernet Interface is provided for Real time sensor monitoring. A stainless steel tripod stand is offered along with this system for robust mounting of data logger enclosure and sensors.

Siphon Tipping Bucket Rain Gauge was designed for Precision Rain Measurements to provide a reliable, full stainless steel tipping bucket rain sensor. It has been update and improved with the addition of an inner funnel to even the flow of the rainfall into the gauge, providing better accuracy at higher rainfall rates. It simplicity of design assures trouble-free operation , yet provide accurate rainfall measurement

Features

• WMO standard bucket’s top diameter (200mm/8”)
• High Accuracy
• Good stability
• Low resistance
• Mesh in the funnel preventing debris
• Highly polished stainless steel construction
• Horizontal Bubble in bottom

Applications

• Environmental monitoring
• Water supply system
• Hydrological monitoring
• Natural disaster monitoring
• Climate research
• Weather monitoring stations
• Smart Agriculture

Parts

• Enclosure assembly (Body)        
• Discharge holder
• Funnel    
• Mounting foot
• Bracket
• Bull-eye Level
• Tips
• Reed switch

The SMKBRNO Rain Gauge is a maintenance-free optical rain sensor that can be used for a wide variety of rainfall monitoring and control applications.

Features

• Self-contained, maintenance-free rain sensor with no moving parts
• Sensor can be completely mobile and mounted in any orientation
• DIP switches allow sensor to be set for mode of operation to best match application
• Reverse polarity protected to 50V
• Current Drain 15 mA nominal. (No outputs on, not raining, no heater)
• about 1.5 mA in micro-power sleep mode.
• 50 mA with output on. 
• Output Relay closure, Normally Open and Normally Closed contacts.
• Max load 1A, 24 VDC. 

The SBKBRNO Rain Gauge is a maintenance-free optical rain sensor that can be used for a wide variety of rainfall monitoring and control applications. The Rain Gauge senses water hitting its outside surface using beams of light. The complete sensor package is about the size of a tennis ball and completely sealed from the environment.

The optical sensing technology overcomes many of the shortcomings of conventional tipping bucket rain gauges. The sensor works in mobile environments, there is no collecting funnel to clog with leaves, and the round shape makes it essentially self-cleaning. While the sensor is not as accurate as a tipping bucket rain gauge, the low cost and compact size of the SBKBRNO makes it ideal for wet weather notification systems or remote rain gauges where periodic maintenance is not possible.

Tipping Bucket Rain Gauge was designed for Economical Rain Observation. It provides a reliable, low-cost tipping bucket rain sensor. It has been update and improved with theAddition of an inner funnel to even the flow of the rainfall into the gauge, providing better Accuracy at higher rainfall rates. It simplicity of design assures trouble-free operation , yet provide accurate rainfall measurement.

Features

• WMO standard bucket’s top diameter
• (200mm/8”)
• High Accuracy
• Good stability
• Low resistance
• Mesh in the funnel preventing debris
• Highly polished stainless steel construction
• Horizontal Bubble in bottom

Applications

• Environmental monitoring
• Water supply system
• Hydrological monitoring
• Natural disaster monitoring
• Climate research
• Weather monitoring stations
• Smart Agriculture

The Ultrasonic Anemometer 3 D serves for the measurement of the wind direction and the wind velocity from all spatial directions. The maintenance-free and wearless anemometer needs no re-calibration, and is equipped with a heating for winter operation even under extreme conditions.

All calculations are carried out by a high-capacity digital-signal-processor (DSP) within the propagation time of the ultrasonic signals with an accuracy basis of 32 bit.
The instrument offers comprehensive statistic functions such as gliding averaging, standard deviation, co-variance etc., which can be selected via the digital interface. The gliding averaging can be set optionally in vectorial or scalar form, identically or differently for each parameter.