• MOQ 2000 Carton
• grade size#80

The flap disk is an abrasive disk, used for metal finishing and polishing . The simpler flat disks, made from a circular flat sheet of a coated abrasive, a flap disk is made of multiple overlapping small pieces or 'flaps', bonded to a central hub. Flap disk is using for high alloyed, stainless, heat treatable steels, and high tensile non-ferrous metals to superfinishing.polishing two wheeler and cycle rims.de-burring of metal channels, fillets, recesses and contours on metal components polishing bottoms of dead end holes using spindle mops. Removing parting lines, imperfections and burrs de-burring stamping and dies. We are manufacturing 60 grade abrasive flap wheels

• MOQ 1 Carton
• Colorgreen

�� cutting wheels � size : 105*1.2*16 � maximum speed 70 ms � diameter 105mm � thickness 1.2mm � should be used within 3 years from the production date � design for iron , except the extra thin disks designed for steel and stainless steel � application : � the main considerations in using resinoid-bonded wheels include the cutting application, the tool being used�such as a right-angle grinder, die grinder, or chop saw�desired cutting action, the material being cut, and space. Wheels typically provide a fast cutting action, long life, and tend to be cost-effective.

• MOQ 1 Carton
• colourblack

Ï�� grinding wheels ï�¼ grinding, or abrasive machining, is the process of removing metal in the form of minute chips by the action of irregularly shaped abrasive particles. These particles may be in bonded wheels, coated belts, or simply loose. Ï�¼ grinding wheels are composed of thousands of small abrasive grains held together by a bonding material. Each abrasive grain is a cutting edge. As the grain passes over the work piece it cuts a small chip, leaving a smooth, accurate surface. As each abrasive grain becomes dull, it breaks away from the bonding material. Ï�¼ size : diameter : 100mm and 180mm thickness : 6 mm

• MOQ 1 Carton
• colourgreen

�� cut off wheels : � cut off wheels, also known as parting wheels, are self-sharpening wheels that are thin in width and often have radial fibres reinforcing them. They are often used in the construction industry for cutting reinforcement bars (rebar), protruding bolts or anything that needs quick removal or trimming. Most handymen would recognise an angle grinder and the discs they use. Size : 355*2.3*25.3 mm

• MOQ 2000 Carton
• grade size#80

The flap disk is an abrasive disk, used for metal finishing and polishing . The simpler flat disks, made from a circular flat sheet of a coated abrasive, a flap disk is made of multiple overlapping small pieces or 'flaps', bonded to a central hub. Flap disk is using for high alloyed, stainless, heat treatable steels, and high tensile non-ferrous metals to superfinishing.polishing two wheeler and cycle rims.de-burring of metal channels, fillets, recesses and contours on metal components polishing bottoms of dead end holes using spindle mops. Removing parting lines, imperfections and burrs de-burring stamping and dies. We are manufacturing 60 grade abrasive flap wheels

• MOQ 1 Carton
• Colorgreen

�� cutting wheels � size : 105*1.2*16 � maximum speed 70 ms � diameter 105mm � thickness 1.2mm � should be used within 3 years from the production date � design for iron , except the extra thin disks designed for steel and stainless steel � application : � the main considerations in using resinoid-bonded wheels include the cutting application, the tool being used�such as a right-angle grinder, die grinder, or chop saw�desired cutting action, the material being cut, and space. Wheels typically provide a fast cutting action, long life, and tend to be cost-effective.

• MOQ 1 Carton
• colourblack

Ï�� grinding wheels ï�¼ grinding, or abrasive machining, is the process of removing metal in the form of minute chips by the action of irregularly shaped abrasive particles. These particles may be in bonded wheels, coated belts, or simply loose. Ï�¼ grinding wheels are composed of thousands of small abrasive grains held together by a bonding material. Each abrasive grain is a cutting edge. As the grain passes over the work piece it cuts a small chip, leaving a smooth, accurate surface. As each abrasive grain becomes dull, it breaks away from the bonding material. Ï�¼ size : diameter : 100mm and 180mm thickness : 6 mm

• MOQ 1 Carton
• colourgreen

�� cut off wheels : � cut off wheels, also known as parting wheels, are self-sharpening wheels that are thin in width and often have radial fibres reinforcing them. They are often used in the construction industry for cutting reinforcement bars (rebar), protruding bolts or anything that needs quick removal or trimming. Most handymen would recognise an angle grinder and the discs they use. Size : 355*2.3*25.3 mm