We specialize in manufacturing and supplying Laminar Air Flow Cabinet. Laminar Air Flow Cabinet provided by us is recognized in the market for its unmatched quality, effective performance and long term durability. Keeping the market standards in consideration, we have fixed competitive prices for the same and make them available in safe packaging.

Specifications :

• Work-bench made of thick ply-board enclosed with stainless steel sheet
• Blowers, pre-filters and motor fixed in lower portion of the cabinet
• HEPA Filter offered vertically on back of the work bench horizontally

Also Available In :

• LAFH-01 Working area size 60 x 60 x 60 cm
• LAFH-02 Working area size 90 x 60 x 60 cm
• LAFH-03 Working area size 120 x 60 x 60 cm
• LAFH-04 Working area size 180 x 60 x 60 cm
• Entire structure manufacturing using Stainless Steel
• Structure made of M.S supplied with S.S. Work Bench

Made available in different capacities and sizes, Hot Air Universal Oven offered by us is high on demand in the domestic markets. Reliable performance, user friendly operation and robust structure make the range of Hot Air Universal Oven as the best available in the market. Consequently, we are counted amongst most reliable Hot Air Universal Oven Manufacturers and Suppliers based in India.

Specifications :

• Standard double wall fabrication
• Inner chamber fabricated using richly anodized aluminum or highly polished stainless steel sheet
• Exterior fabricated using thick milled steel duly finished in white stoving enamel/Powder coated paint with mat finished colour combinations
• L-Shaped thermometer is built- in type
• Equipment is apt for operating in 220 VAC 50Hz single phase
• Kanthal wire heating elements provided on three sides for fast and uniform heating from range of 50^oC to 250^oC ± 2^oC, controlled by capillary type thermostat
• Also provided with cord and plug
• Control panel is supplied with selector switch of high and low rates of power thermometer control Knob and indicator for mains & thermostat

Optional Accessories :

• Timer 0-24 hours
• Air Circulating fan
• Digital Temp Indicator-cum-controller
• Digital Temperature Indicator
• Microprocessor PID Digital temp. Indicator-cum-controller

We are into offering to the clients Student Organ Bath, which is made using high grade components. Owing to its flawless functioning, longer service life and optimum performance, Student Organ Bath is high on demand in the national markets. Clients are eased with the availability of same at affordable rates and in safe packaging.

Specifications :

• Perspex organ bath with fine thermostatic electric stirrer, temperature control and complete set of accessories making it a versatile unit for all kinds of research work
• Stirrer unit is completely independent and dips in the bath in one corner fixing on its special stainless steel upright
• Bath 12â��â��x 9â��â��x 8â��â�� with leak proof dovetailed joints resting in study metal frame
• Top of the bath carries a 1â��â��x 3/8â��â�� thick band for fixing accessories
• Inside the bath: metal sheathed heating element (easily replaceable)
• AMS junction box is fixed to the bath frame, and carries all the electrical leads
• Two pilot lamps indicate functioning of the thermostat and stirrer
• Controlled by means of a fine adjustable thermostat with sensitivity +1^oC

Standard Components :

• Warming coils
• Double set of glass inner vessels
• Two stainless steel capillary levers
• X blocks
• Oxygen tubes
• Four stainless steel upright with boss heads

We have gained huge accolades in the market for providing finest quality Fume Hood. Fume Hood that we offer is extensively used in laboratories, clinics, hospitals etc. among others. Supreme quality, sturdy structure and longer service life are synonyms to the range of Fume Hood dispatched by us.

Specifications :

• Manufactured using thick wooden board
• Designed to throw-out all toxic/harmful vapors & fumes thus providing protection to the instrument and the labor
• Working table top is acid/alkali resistant and a small wash basin with connections facilitated for inlet and outlet of water
• Front facing panel is fixed with 15/5 Amp socket with switches for fluorescent light and exhaust system
• Outer is finished with Sunmica and inner epoxy painted
• The unit is fitted with fluorescent light and a gas cock for gas/air supply
• Front door moves vertically up and down with concealed counter balanced weights
• Suitable to work on 220/230 volts A.C supply
• Space beneath the work station is equipped with storage compartment

Working Chamber Size :

• 3 x 2x 2
• 4 x 2 x 2
• 5 x 2½  x 2½

Optional Accessories :

• PVC Fume Duct (per ft.)
• High CFM exhaust system (for duct exceeding 10 feet length)
• S.S. Lining on work bench

BOD Incubator we manufacture and supply is high on demand in the markets. BOD Incubator is widely acknowledged by the clients owing to its sturdy design, smooth functioning and high-end performance. Competitive prices and prompt delivery has strengthened our position in the market as one of the dependable BOD Incubator Manufacturers and Suppliers based in India.

Specifications :

• Double wall construction equipment
• Exterior chamber manufactured with use of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with finished color combinations
• Inner Chamber fabricated using richly anodized aluminum or highly polished stainless steel sheet, provided with two/three removable perforated shelves
• Outer double wall door is equipped with magnetic gasket and lock & key arrangement
• Operated through inner illumination
• Inner door unbreakable acrylic transparent sheet for inspection of material in the chamber without disturbing the chamber temperature
• Heating arrangement done through the chamber to work on high temperature conditions
• Standard cooling unit provided with a sealed compressor Temperature is controlled through Protective devices have been fitted below the chamber for safe and effective working
• Deluxe Digital Controller that ranges from 5^oC ± 0.5^oC
• Control panel with different indicators, on-off switch and cord and plug etc. to operate on 220VAC Hz single phase.
• Inner air circulating system is also supplied for achieving uniform temperature

Optional Accessories :

• Co2 / air mixer nozzle
• Internal illumination with 3 fluorescent tube
• Timer 0-24 hours day night cycle
• Automatic Voltage stabilizer 3-5 KVA (recommended must)
• Microprocessor or PID digital Temperature Indicator-cum-controller

We specialize in manufacturing and supplying Laminar Air Flow Cabinet. Laminar Air Flow Cabinet provided by us is recognized in the market for its unmatched quality, effective performance and long term durability. Keeping the market standards in consideration, we have fixed competitive prices for the same and make them available in safe packaging.

Specifications :

• Work-bench made of thick ply-board enclosed with stainless steel sheet
• Blowers, pre-filters and motor fixed in lower portion of the cabinet
• HEPA Filter offered vertically on back of the work bench horizontally

Also Available In :

• LAFH-01 Working area size 60 x 60 x 60 cm
• LAFH-02 Working area size 90 x 60 x 60 cm
• LAFH-03 Working area size 120 x 60 x 60 cm
• LAFH-04 Working area size 180 x 60 x 60 cm
• Entire structure manufacturing using Stainless Steel
• Structure made of M.S supplied with S.S. Work Bench

Made available in different capacities and sizes, Hot Air Universal Oven offered by us is high on demand in the domestic markets. Reliable performance, user friendly operation and robust structure make the range of Hot Air Universal Oven as the best available in the market. Consequently, we are counted amongst most reliable Hot Air Universal Oven Manufacturers and Suppliers based in India.

Specifications :

• Standard double wall fabrication
• Inner chamber fabricated using richly anodized aluminum or highly polished stainless steel sheet
• Exterior fabricated using thick milled steel duly finished in white stoving enamel/Powder coated paint with mat finished colour combinations
• L-Shaped thermometer is built- in type
• Equipment is apt for operating in 220 VAC 50Hz single phase
• Kanthal wire heating elements provided on three sides for fast and uniform heating from range of 50^oC to 250^oC ± 2^oC, controlled by capillary type thermostat
• Also provided with cord and plug
• Control panel is supplied with selector switch of high and low rates of power thermometer control Knob and indicator for mains & thermostat

Optional Accessories :

• Timer 0-24 hours
• Air Circulating fan
• Digital Temp Indicator-cum-controller
• Digital Temperature Indicator
• Microprocessor PID Digital temp. Indicator-cum-controller

We are into offering to the clients Student Organ Bath, which is made using high grade components. Owing to its flawless functioning, longer service life and optimum performance, Student Organ Bath is high on demand in the national markets. Clients are eased with the availability of same at affordable rates and in safe packaging.

Specifications :

• Perspex organ bath with fine thermostatic electric stirrer, temperature control and complete set of accessories making it a versatile unit for all kinds of research work
• Stirrer unit is completely independent and dips in the bath in one corner fixing on its special stainless steel upright
• Bath 12â��â��x 9â��â��x 8â��â�� with leak proof dovetailed joints resting in study metal frame
• Top of the bath carries a 1â��â��x 3/8â��â�� thick band for fixing accessories
• Inside the bath: metal sheathed heating element (easily replaceable)
• AMS junction box is fixed to the bath frame, and carries all the electrical leads
• Two pilot lamps indicate functioning of the thermostat and stirrer
• Controlled by means of a fine adjustable thermostat with sensitivity +1^oC

Standard Components :

• Warming coils
• Double set of glass inner vessels
• Two stainless steel capillary levers
• X blocks
• Oxygen tubes
• Four stainless steel upright with boss heads

We have gained huge accolades in the market for providing finest quality Fume Hood. Fume Hood that we offer is extensively used in laboratories, clinics, hospitals etc. among others. Supreme quality, sturdy structure and longer service life are synonyms to the range of Fume Hood dispatched by us.

Specifications :

• Manufactured using thick wooden board
• Designed to throw-out all toxic/harmful vapors & fumes thus providing protection to the instrument and the labor
• Working table top is acid/alkali resistant and a small wash basin with connections facilitated for inlet and outlet of water
• Front facing panel is fixed with 15/5 Amp socket with switches for fluorescent light and exhaust system
• Outer is finished with Sunmica and inner epoxy painted
• The unit is fitted with fluorescent light and a gas cock for gas/air supply
• Front door moves vertically up and down with concealed counter balanced weights
• Suitable to work on 220/230 volts A.C supply
• Space beneath the work station is equipped with storage compartment

Working Chamber Size :

• 3 x 2x 2
• 4 x 2 x 2
• 5 x 2½  x 2½

Optional Accessories :

• PVC Fume Duct (per ft.)
• High CFM exhaust system (for duct exceeding 10 feet length)
• S.S. Lining on work bench

BOD Incubator we manufacture and supply is high on demand in the markets. BOD Incubator is widely acknowledged by the clients owing to its sturdy design, smooth functioning and high-end performance. Competitive prices and prompt delivery has strengthened our position in the market as one of the dependable BOD Incubator Manufacturers and Suppliers based in India.

Specifications :

• Double wall construction equipment
• Exterior chamber manufactured with use of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with finished color combinations
• Inner Chamber fabricated using richly anodized aluminum or highly polished stainless steel sheet, provided with two/three removable perforated shelves
• Outer double wall door is equipped with magnetic gasket and lock & key arrangement
• Operated through inner illumination
• Inner door unbreakable acrylic transparent sheet for inspection of material in the chamber without disturbing the chamber temperature
• Heating arrangement done through the chamber to work on high temperature conditions
• Standard cooling unit provided with a sealed compressor Temperature is controlled through Protective devices have been fitted below the chamber for safe and effective working
• Deluxe Digital Controller that ranges from 5^oC ± 0.5^oC
• Control panel with different indicators, on-off switch and cord and plug etc. to operate on 220VAC Hz single phase.
• Inner air circulating system is also supplied for achieving uniform temperature

Optional Accessories :

• Co2 / air mixer nozzle
• Internal illumination with 3 fluorescent tube
• Timer 0-24 hours day night cycle
• Automatic Voltage stabilizer 3-5 KVA (recommended must)
• Microprocessor or PID digital Temperature Indicator-cum-controller