KRC-20D Features

• Step less speed regulator.
• Digital speed Indicator.
• 1-99 minutes Digital timer & infinite mode.
• Zero Start interlock.
• Dynamic Brake.
• Alarm at auto switch off,
• CFC free cooling with pre-cooling S standby cooling facility.
• Digital temperature indicator - temperature range of -20 "C to + 40 "C.

Safety

• Imbalance safety cut off.
• Safety Lid switch.
• Chamber made of Stainless Steel.

KRC-20B Features

• Brushless low noise AC Induction Motor and Inverter Drive.
• Programmable Acceleration / Deceleration- range 40- 240 seconds.
• Dynamic brake.
• Digital Speed indicator.
• CFC free cooling with pre-cooling & standby cooling facility,
• Digital temperature indicator -temperature range -10"Cto + 40"C.
• 1-99 minutes Digital timer & infinite mode.
• Memory of last used program.

KRC-20B Safety

• Imbalance detection S safety switch off.
• Safety Lid switch.
• Chamber made of Stainless Steel.

KRC-20B Technical Data

• (KRC-20D / KRC-20B)
• (W) 860 mm x (D) 580 mm x (H) 520mm
• Weight 114 Kg, Connected Load : 1.75 kVA,
• Max. Speed : 20000 RPM, Max. RCF : 34500 xg,
• Max. Tube Size : 100 ml, Max. Capacity : 400 ml

Why Laminar Flow Cabinets?

• Laminar Flow Cabinets help create a particle-free work environment by projecting the air through an advanced filtration system and thereby exhausting it across the work surface in a laminar or uni-directional air stream. They can provide an excellent clean air environmental condition for a number of laboratory needs.
• A Vertical Laminar Air Flow Cabinetpushes the air through a HEPA filter, which is located at the top of the enclosure, and directs it downward as laminates of constant speed, onto the work surface. The air leaves the work area through holes or ducts at the base. Vertical flow cabinets help provide a greater operating protection

Working & Features of Vertical Laminar Air Flow Unit

Krew Instruments Pvt Ltd's Vertical Laminar Air Flow units also provide a product protection from within the work area, which is exclusively confined by a clear glass panel and sliding glass doors. The salient features include :

• Trapping any particles of 10u and above, with above 90% efficiency.
• Complete removal of contaminated air from the interior.
• Maintaining uniform air flow with constant velocity onthe work area
• Vertical Laminar Flow takes up less space and can be fitted and installed in confined areas.
• Extra workspace (Depth of 29.5" / 750mm).
• The advantage of working from both sides with crystal clear visibility.

KRC - 16K Features

• Programmable speed control with digital speed indicator.
• Digital display of working RCF value.
• Alarm at auto switch off.
• Programmable Acceleration time settings in the range 30 to 300 seconds.
• 1-99 minutes preset digital timer.
• CFC free cooling with pre-cooling & standby cooling facility.
• Digital temperature indicator -temperature range -10"C to +40 "C

Safety

• Safety Lid switch.
• Imbalance safety cut off.
• Chamber made of Stainless Steel.

KRC - 16KR Features

• Micro Processor Control.
• Brushless low noise AC Induction motor & variable frequency drive.
• LCD Display.
• Sot Touch keyboard.
• 99 program memory.
• Speed with 10 RPM increment.
• Timer with 1 minute increment.
• Programmable Acceleration / Deceleration (range 60-720 seconds).
• Selector switch for display of working speed/RCF value.
• Other indicators: remaining time, rotor in motion, temperature, imbalance, safety lid open.
• CFC free cooling with pre-cooling S standby cooling facility.
• Digital temperature indicator -temperature range of
• Temperature with 1"C increment.

KRC - 16KR Technical Data

• (KRC - 16K / KRC-16KR)
• (W) 760 mm x (D) 450 mm x (H) 475 mm
• Weight 75 Kg, Connected Load : 0.9 kVA,
• Max. Speed : 16000 RPM, Max. RCF : 17600 xg,
• Max. Tube Size : 5 ml, Max. Capacity : 32 ml

Salient Features

• Microprocessor P.I.D. Temperature control
• Digital display of temperature
• Safety Thermostat
• Over / Under Counter Design

Construction

Bacteriological Incubators by Krew Instruments Pvt Ltdare available with double walled construction which is fully insulated with polyurethane foam for cost-effective operation, offer a number of shelves within the unit for increased storage facility.

CoolingImproved cooling system is an advantageous feature in the designs of Krew Instruments Pvt Ltd BOD incubators.

DoorsThe doors belonging to the BOD incubators are available in stainless steel or glass. You can request for the type of door in case of a custom BOD design.

SafetyFor optimum safety of preservation and storage, the units are well equipped with many precautionary safety measures to ensure no leakage or any temperature variation and loss of control.

Temperature Range

• The BOD incubators come with temperature ranges from 00C to 600 C with an accuracy of +/- 0.10C.
• Cooling BOD Incubators and Laboratory BOD Incubators are especially designed to conduct life cycle testing, shelf life studies, general incubation and refrigerated storage. Temperature range adjustable from 5 – 600C with micro controller based temperature indicator cum controller. Chambers are extensively used for seed testing, biological studies etc. We are the leading BOD Incubator Manufacturer in Mumbai.

Cabinet Construction and Refrigeration System

• The chamber cabinet comes insulated with an optimized high-density CFC free Poly Urethane Foam. The interior of the chamber is made with mirror finish surface of stainless Steel (304 SS, 0.8 mm thick) and the exterior with white powder coated (1.0 mm thick) mild steel. The door has a systematic magnetic door gasket with a single keyed door lock. The stainless steel trays are provided for storage inside. The perfect cooling is achieved by a hermetically sealed compressor unit of premium quality. Complete stainless steel (inside SS 316, 0.8 mm. thick with mirror finished and outside. SS 304, 1 mm thick) is also manufactured by us.

Special Features

• Unique airflow system ensures even distribution of temperature.
• Foamed - in place PUF insulation ensures temperature stability and reduced energy consumption.
• Audiovisual alarm if the temperature deviates from the pre set temperature.
• Precise control of temperature by using CE approved micro controller based PID controller (Optional) (Imported, Auto tuning type).
• Refrigeration system with CFC free compressor and R-134a ecofriendly refrigeration system with time delay.

 The digital microprocessor control offers a very rapid temperature and a quick recovery with an optimal temperature stability to assist and reduce the time that required thawing such multiple bags. They are user-friendly so it allows multiple time options to thaw any sized bags
Cryoprecipitate baths are safely thawed for multiple blood products that may be required for a patient infusion. Quick and easy to drain, these machines provide the accurate conditions that are needed to perform the best recovery. After the uniform temperature and all flow is set, the cryoprecipitate bath has a built-in alarm which will alert any personnel if the limits are well exceeded for an optimal operation security. Since the fresh frozen plasma is negatively impacted by any contaminated baths, Krew Instruments Pvt Ltd equipment can be exceptionally very easy to clean between uses.

CalibrationThe Equipment Calibrated With the Help of Master Calibrator, Which is Certified for its Accuracy by Electronics Regional Test Laboratory (ERTL-Mumbai)

• Salient Features
• Micro Controller based LCD Display & Display for set and Process Value
• Temperature Stability and Energy Efficiency
• Internal Liquid Circulation for Temperature Uniformity
• Audio-Visual alarm When the Temperature Deviates From the Preset Temperature

Special Features

• Micro-controller based internal temperature control within ± 0.5 ºC.
• Unique air flow system ensures even temperature distribution.
• Formed in place CFC free PUF insulation ensures temperature stability and reduced energy consumption.
• Audio-visual alarm for temperature deviation from the set temperature.
• Motion failure alarm when the agitator fails to operate.
• Automatic stop of agitator when the door is opened.

The Platelet Agitator features the uniquely designed rack with high ventilation capability to allow oxygen flow to the platelets. Smooth sliding stainless steel trays are provided which can be removed for cleaning as well as forplacing of the bags. Fixed speed agitation with heavy duty bearings and quiet operation also marked as special aspects in the design. The agitation stops automatically when the door is opened.

CalibrationCalibration in this equipment is done with the help of a master calibrator, which is certified for its accuracy by the electronic Regional Testing Laboratory (ERTL), which is recognized by the Government of India.

KRC - 18K

• Brushless low noise AC Induction motor and inverter drive.
• Programmable acceleration/deceleration (range 40-240 seconds).
• Dynamic Brake.
• Digital speed indicator.
• CFC free cooling with pre-cooling & standby cooling facility.
• Digital temperature indicator range -10° C to + 40° C.
• 1-99 minutes digital timer & infinite mode.
• Memory of last used program.

Safety :

• Imbalance detection & safety Switch off.
• Safety Lid Switch.
• Chamber made of stainless steel.

KRC - 10K

• Brushless low noise AC Induction motor and Inverter drive.
• Programmable acceleration/deceleration (range 40-240 seconds).
• Dynamic Brake.
• Digital Speed indicator.
• CFC free cooling with pre-cooling & standby cooling facility.
• Digital temperature indicator range -10° C to + 40° C.
• 1-99 minutes digital timer & infinite mode.
• Memory of last used program.

Safety

• Imbalance detection & safety Switch off.
• Safety Lid Switch.
• Chamber made of stainless steel.

KRC - 10MP

• Micro Processor Control.
• Brushless low noise AC Induction motor with variable frequency drive.
• LCD display.
• Soft touch Keyboard.
• 99 program memory
• Speed with 10 RPM increment.
• Timer with 1 minute increment.
• Programmable acceleration/deceleration (range 60-720 seconds).
• Selector switch for display of working speed/ RCF value.
• Other indicators: remaining time, rotor in motion, imbalance, safety lid open.
• CFC free cooling with pre-cooling & standby cooling facility.
• Digital temperature indicator (range 10° C to + 40° C.)
• Temperature with 1°C increment.

Safety :

• Safety Electrical and Mechanical lock with programmed emergency release mechanism.
• Safety Lid Switch.
• Imbalance safety cut off.
• Chamber made of stainless steel.

Technical Data :

• (KRC - 18K / KRC - 10K / KRC - 10MP)
• KRC - 18K : Max. Speed : 20000 RPM, Max, RCF :34800 xg
• KRC - 10K / KRC - 10MP : Max. Speed : 10000 RPM, Max, RCF :7900 xg
• Weight : 52 Kg, Connected Load : 0.75 KVA
• Max Tube Size: 200 ml, Max. capacity: 1200 ml.

Multispin Centrifuge KLC - 6D Features

• A Step less speed regulator device
• Unique Digital speed Indicator
• About 1-99 minutes fixed digital timer & infinite mode

Multispin Centrifuge KLC - 6B Features

• With such a brushless low noise and induced AC Induction Motor with a variable frequency drive
• Fantastic LCD Display of Speed to 8 time
• About a 1-120 minutes with a Digital timer & an infinite mode
• Fine Programmable Acceleration or Deceleration with a range of 40- 240 seconds
• Dynamic Fine Brake
• Memory capacity of any last used program

SafetyImbalance detection & safety switch offSafety Lid switch

Technical Data

• (KLC - 6D / KLC - 6B)
• (W) 360 mm x (D) 440 mm x (H) 350 mm
• Weight: 22 Kg, Connected Load : 0.30 kVA,
• Max. Speed : 5500 RPM, Max. RCF : 3950 xg,
• Max. Tube Size : 50 ml, Max, Capacity : 300 ml.

KLS-10D Features

• Step less speed regulator
• Digital speed Indicator
• 1-99 minutes Digital timer & infinite mode
• Zero Start interlock
• Imbalance safety cut off
• Safety Lid switch
• Dynamic Brake

KLS-10B Features

• Brushless low noise AC Induction Motor with variable frequency drive.
• LCD Display of Speed & time.
• 1-120 minutes Digital timer & infinite mode.
• Programmable Acceleration / Deceleration- range 40- 240 seconds.
• Dynamic Brake.
• Memory of last used program.

SafetyImbalance detection & safety switch off.Safety Lid switch.

Technical Data

• KLS-10D/KLS-10B/KLS-10MP
• (W) 450 mm x (D) 590 mm x (H) 445mm
• Weight 52 Kg, Connected Load : 0.75 kVA,
• Max. Speed : 7000 RPM, Max. RCF : 7250 xg
• For KLS-10B/KLS-10MP - Max.speed:1000 RPM, MaX.RCF:10, 500Xg
• Max. Tube Size : 200 ml, Max. Capacity : 1200 ml

KMS-16D Features

• Step less speed regulator
• Digital speed Indicator
• 1-99 minutes Digital timer 8 infinite mode

KMS-16B Features

• Programmable speed control with digital speed indicator,
• Digital display of working RCF value.
• 1-99 minutes preset digital timer.
• Programmable Acceleration time.

Safety

• Safety Lid switch.
• Imbalance safety cut off.

KMS-16BF

• Brushless low noise AC Induction Motor with variable frequency % drive.
• LCD Display of Speed & time.
• 1-120 minutes Digital timer & infinite mode.
• Programmable Acceleration / Deceleration- range 40- 240 seconds.
• Dynamic Brake.
• Memory of last used program.

SafetyImbalance detection & safety switch off.Safety Lid switch

Technical Data

• (KMS-16D / KMS-16B)
• (W) 320 mm x (D) 410 mm x (H) 310mm
• Weight 20 Kg, Connected Load : 0.36 kVA,
• Max. Speed : 16000 RPM, Max. RCF : 17600 xg,
• Max. Tube Size : 5 ml, Max. Capacity : 32 ml

Blood Bank Centrifuge Technical Data

• (W) 860 mm x (D) 960 mm x (H) 965mm Weight: 285 Kg, Connected Load : 10 kVA, Max. Speed ; 4800 RPM, Max. RCF : 6000 xg, Max. Tube Size : 500 ml, Max. Capacity : 6000 ml.
• Our centrifuge has Swing Out Rotor Heads and multiple carriers for any Blood Bank Applications that is best dealt for a Centrifuge Model KBC

KBC Features

• Microprocessor built controls
• Installed 99 program memory
• Brush less induction in motor drives

Core Features

• Speed control up to 5000 RPM with 10 RPM increment.
• Temperature in the range -20°c to +40°c with 1 C Working temp range -5°c to 20°c.
• Preset timer range 1 to 120 minutes withi minute increment & infinite mode.
• User programmable Acceleration and Deceleration time range from 40 seconds to 450 seconds.

Other Features, Displays & Safety Systems

• Real time read outs of working RCF Value
• Pre-cooling and standby emergency cooling facility
• Programmed Emergency with manual lid lock release in case no power
• Easy Safety lid open
• An Imbalance indication
• Safety switch on/off mechanism
• Hydraulic hold
• Mechanical and Electronic lid with a lock & indicator
• Floor Model heavy duty unit with epoxy coated body and stainless steel chamber.

Dimension (W x D x H) mm: 860 x 960 x 965.

KHS-20D Features

• Step less speed regulator
• Digital speed Indicator,
• 1-99 minutes Digital timer & infinite mode.
• Zero Start interlock.
• Imbalance safety cut off.
• Safety Lid switch.
• Dynamic Brake.

KHS-20B Features

• Brushless low noise AC Induction Motor with variable frequency drive.
• LCD Display of Speed & time.
• 1-120 minutes Digital timer S infinite mode.
• Programmable Acceleration / Deceleration- range 40- 240 seconds.
• Dynamic Brake.
• Memory of last used program.

SafetyImbalance detection & safety switch off.Safety Lid switch.

Technical Data

• MHS-20D / MHS-20B)
• (W) 450 mm x (D) 570 mm x (H) 510mm
• Weight: 50 Kg, Connected Load : 0.75 kVA
• Max. Speed : 20000 RPM, Max. RCF : 34500 xg,
• Max. Tube Size : 100 ml, Max. Capacity: 400 ml.

KRC-20D Features

• Step less speed regulator.
• Digital speed Indicator.
• 1-99 minutes Digital timer & infinite mode.
• Zero Start interlock.
• Dynamic Brake.
• Alarm at auto switch off,
• CFC free cooling with pre-cooling S standby cooling facility.
• Digital temperature indicator - temperature range of -20 "C to + 40 "C.

Safety

• Imbalance safety cut off.
• Safety Lid switch.
• Chamber made of Stainless Steel.

KRC-20B Features

• Brushless low noise AC Induction Motor and Inverter Drive.
• Programmable Acceleration / Deceleration- range 40- 240 seconds.
• Dynamic brake.
• Digital Speed indicator.
• CFC free cooling with pre-cooling & standby cooling facility,
• Digital temperature indicator -temperature range -10"Cto + 40"C.
• 1-99 minutes Digital timer & infinite mode.
• Memory of last used program.

KRC-20B Safety

• Imbalance detection S safety switch off.
• Safety Lid switch.
• Chamber made of Stainless Steel.

KRC-20B Technical Data

• (KRC-20D / KRC-20B)
• (W) 860 mm x (D) 580 mm x (H) 520mm
• Weight 114 Kg, Connected Load : 1.75 kVA,
• Max. Speed : 20000 RPM, Max. RCF : 34500 xg,
• Max. Tube Size : 100 ml, Max. Capacity : 400 ml

Why Laminar Flow Cabinets?

• Laminar Flow Cabinets help create a particle-free work environment by projecting the air through an advanced filtration system and thereby exhausting it across the work surface in a laminar or uni-directional air stream. They can provide an excellent clean air environmental condition for a number of laboratory needs.
• A Vertical Laminar Air Flow Cabinetpushes the air through a HEPA filter, which is located at the top of the enclosure, and directs it downward as laminates of constant speed, onto the work surface. The air leaves the work area through holes or ducts at the base. Vertical flow cabinets help provide a greater operating protection

Working & Features of Vertical Laminar Air Flow Unit

Krew Instruments Pvt Ltd's Vertical Laminar Air Flow units also provide a product protection from within the work area, which is exclusively confined by a clear glass panel and sliding glass doors. The salient features include :

• Trapping any particles of 10u and above, with above 90% efficiency.
• Complete removal of contaminated air from the interior.
• Maintaining uniform air flow with constant velocity onthe work area
• Vertical Laminar Flow takes up less space and can be fitted and installed in confined areas.
• Extra workspace (Depth of 29.5" / 750mm).
• The advantage of working from both sides with crystal clear visibility.

KRC - 16K Features

• Programmable speed control with digital speed indicator.
• Digital display of working RCF value.
• Alarm at auto switch off.
• Programmable Acceleration time settings in the range 30 to 300 seconds.
• 1-99 minutes preset digital timer.
• CFC free cooling with pre-cooling & standby cooling facility.
• Digital temperature indicator -temperature range -10"C to +40 "C

Safety

• Safety Lid switch.
• Imbalance safety cut off.
• Chamber made of Stainless Steel.

KRC - 16KR Features

• Micro Processor Control.
• Brushless low noise AC Induction motor & variable frequency drive.
• LCD Display.
• Sot Touch keyboard.
• 99 program memory.
• Speed with 10 RPM increment.
• Timer with 1 minute increment.
• Programmable Acceleration / Deceleration (range 60-720 seconds).
• Selector switch for display of working speed/RCF value.
• Other indicators: remaining time, rotor in motion, temperature, imbalance, safety lid open.
• CFC free cooling with pre-cooling S standby cooling facility.
• Digital temperature indicator -temperature range of
• Temperature with 1"C increment.

KRC - 16KR Technical Data

• (KRC - 16K / KRC-16KR)
• (W) 760 mm x (D) 450 mm x (H) 475 mm
• Weight 75 Kg, Connected Load : 0.9 kVA,
• Max. Speed : 16000 RPM, Max. RCF : 17600 xg,
• Max. Tube Size : 5 ml, Max. Capacity : 32 ml

Salient Features

• Microprocessor P.I.D. Temperature control
• Digital display of temperature
• Safety Thermostat
• Over / Under Counter Design

Construction

Bacteriological Incubators by Krew Instruments Pvt Ltdare available with double walled construction which is fully insulated with polyurethane foam for cost-effective operation, offer a number of shelves within the unit for increased storage facility.

CoolingImproved cooling system is an advantageous feature in the designs of Krew Instruments Pvt Ltd BOD incubators.

DoorsThe doors belonging to the BOD incubators are available in stainless steel or glass. You can request for the type of door in case of a custom BOD design.

SafetyFor optimum safety of preservation and storage, the units are well equipped with many precautionary safety measures to ensure no leakage or any temperature variation and loss of control.

Temperature Range

• The BOD incubators come with temperature ranges from 00C to 600 C with an accuracy of +/- 0.10C.
• Cooling BOD Incubators and Laboratory BOD Incubators are especially designed to conduct life cycle testing, shelf life studies, general incubation and refrigerated storage. Temperature range adjustable from 5 – 600C with micro controller based temperature indicator cum controller. Chambers are extensively used for seed testing, biological studies etc. We are the leading BOD Incubator Manufacturer in Mumbai.

Cabinet Construction and Refrigeration System

• The chamber cabinet comes insulated with an optimized high-density CFC free Poly Urethane Foam. The interior of the chamber is made with mirror finish surface of stainless Steel (304 SS, 0.8 mm thick) and the exterior with white powder coated (1.0 mm thick) mild steel. The door has a systematic magnetic door gasket with a single keyed door lock. The stainless steel trays are provided for storage inside. The perfect cooling is achieved by a hermetically sealed compressor unit of premium quality. Complete stainless steel (inside SS 316, 0.8 mm. thick with mirror finished and outside. SS 304, 1 mm thick) is also manufactured by us.

Special Features

• Unique airflow system ensures even distribution of temperature.
• Foamed - in place PUF insulation ensures temperature stability and reduced energy consumption.
• Audiovisual alarm if the temperature deviates from the pre set temperature.
• Precise control of temperature by using CE approved micro controller based PID controller (Optional) (Imported, Auto tuning type).
• Refrigeration system with CFC free compressor and R-134a ecofriendly refrigeration system with time delay.

 The digital microprocessor control offers a very rapid temperature and a quick recovery with an optimal temperature stability to assist and reduce the time that required thawing such multiple bags. They are user-friendly so it allows multiple time options to thaw any sized bags
Cryoprecipitate baths are safely thawed for multiple blood products that may be required for a patient infusion. Quick and easy to drain, these machines provide the accurate conditions that are needed to perform the best recovery. After the uniform temperature and all flow is set, the cryoprecipitate bath has a built-in alarm which will alert any personnel if the limits are well exceeded for an optimal operation security. Since the fresh frozen plasma is negatively impacted by any contaminated baths, Krew Instruments Pvt Ltd equipment can be exceptionally very easy to clean between uses.

CalibrationThe Equipment Calibrated With the Help of Master Calibrator, Which is Certified for its Accuracy by Electronics Regional Test Laboratory (ERTL-Mumbai)

• Salient Features
• Micro Controller based LCD Display & Display for set and Process Value
• Temperature Stability and Energy Efficiency
• Internal Liquid Circulation for Temperature Uniformity
• Audio-Visual alarm When the Temperature Deviates From the Preset Temperature

Special Features

• Micro-controller based internal temperature control within ± 0.5 ºC.
• Unique air flow system ensures even temperature distribution.
• Formed in place CFC free PUF insulation ensures temperature stability and reduced energy consumption.
• Audio-visual alarm for temperature deviation from the set temperature.
• Motion failure alarm when the agitator fails to operate.
• Automatic stop of agitator when the door is opened.

The Platelet Agitator features the uniquely designed rack with high ventilation capability to allow oxygen flow to the platelets. Smooth sliding stainless steel trays are provided which can be removed for cleaning as well as forplacing of the bags. Fixed speed agitation with heavy duty bearings and quiet operation also marked as special aspects in the design. The agitation stops automatically when the door is opened.

CalibrationCalibration in this equipment is done with the help of a master calibrator, which is certified for its accuracy by the electronic Regional Testing Laboratory (ERTL), which is recognized by the Government of India.

KRC - 18K

• Brushless low noise AC Induction motor and inverter drive.
• Programmable acceleration/deceleration (range 40-240 seconds).
• Dynamic Brake.
• Digital speed indicator.
• CFC free cooling with pre-cooling & standby cooling facility.
• Digital temperature indicator range -10° C to + 40° C.
• 1-99 minutes digital timer & infinite mode.
• Memory of last used program.

Safety :

• Imbalance detection & safety Switch off.
• Safety Lid Switch.
• Chamber made of stainless steel.

KRC - 10K

• Brushless low noise AC Induction motor and Inverter drive.
• Programmable acceleration/deceleration (range 40-240 seconds).
• Dynamic Brake.
• Digital Speed indicator.
• CFC free cooling with pre-cooling & standby cooling facility.
• Digital temperature indicator range -10° C to + 40° C.
• 1-99 minutes digital timer & infinite mode.
• Memory of last used program.

Safety

• Imbalance detection & safety Switch off.
• Safety Lid Switch.
• Chamber made of stainless steel.

KRC - 10MP

• Micro Processor Control.
• Brushless low noise AC Induction motor with variable frequency drive.
• LCD display.
• Soft touch Keyboard.
• 99 program memory
• Speed with 10 RPM increment.
• Timer with 1 minute increment.
• Programmable acceleration/deceleration (range 60-720 seconds).
• Selector switch for display of working speed/ RCF value.
• Other indicators: remaining time, rotor in motion, imbalance, safety lid open.
• CFC free cooling with pre-cooling & standby cooling facility.
• Digital temperature indicator (range 10° C to + 40° C.)
• Temperature with 1°C increment.

Safety :

• Safety Electrical and Mechanical lock with programmed emergency release mechanism.
• Safety Lid Switch.
• Imbalance safety cut off.
• Chamber made of stainless steel.

Technical Data :

• (KRC - 18K / KRC - 10K / KRC - 10MP)
• KRC - 18K : Max. Speed : 20000 RPM, Max, RCF :34800 xg
• KRC - 10K / KRC - 10MP : Max. Speed : 10000 RPM, Max, RCF :7900 xg
• Weight : 52 Kg, Connected Load : 0.75 KVA
• Max Tube Size: 200 ml, Max. capacity: 1200 ml.

Multispin Centrifuge KLC - 6D Features

• A Step less speed regulator device
• Unique Digital speed Indicator
• About 1-99 minutes fixed digital timer & infinite mode

Multispin Centrifuge KLC - 6B Features

• With such a brushless low noise and induced AC Induction Motor with a variable frequency drive
• Fantastic LCD Display of Speed to 8 time
• About a 1-120 minutes with a Digital timer & an infinite mode
• Fine Programmable Acceleration or Deceleration with a range of 40- 240 seconds
• Dynamic Fine Brake
• Memory capacity of any last used program

SafetyImbalance detection & safety switch offSafety Lid switch

Technical Data

• (KLC - 6D / KLC - 6B)
• (W) 360 mm x (D) 440 mm x (H) 350 mm
• Weight: 22 Kg, Connected Load : 0.30 kVA,
• Max. Speed : 5500 RPM, Max. RCF : 3950 xg,
• Max. Tube Size : 50 ml, Max, Capacity : 300 ml.

KLS-10D Features

• Step less speed regulator
• Digital speed Indicator
• 1-99 minutes Digital timer & infinite mode
• Zero Start interlock
• Imbalance safety cut off
• Safety Lid switch
• Dynamic Brake

KLS-10B Features

• Brushless low noise AC Induction Motor with variable frequency drive.
• LCD Display of Speed & time.
• 1-120 minutes Digital timer & infinite mode.
• Programmable Acceleration / Deceleration- range 40- 240 seconds.
• Dynamic Brake.
• Memory of last used program.

SafetyImbalance detection & safety switch off.Safety Lid switch.

Technical Data

• KLS-10D/KLS-10B/KLS-10MP
• (W) 450 mm x (D) 590 mm x (H) 445mm
• Weight 52 Kg, Connected Load : 0.75 kVA,
• Max. Speed : 7000 RPM, Max. RCF : 7250 xg
• For KLS-10B/KLS-10MP - Max.speed:1000 RPM, MaX.RCF:10, 500Xg
• Max. Tube Size : 200 ml, Max. Capacity : 1200 ml

KMS-16D Features

• Step less speed regulator
• Digital speed Indicator
• 1-99 minutes Digital timer 8 infinite mode

KMS-16B Features

• Programmable speed control with digital speed indicator,
• Digital display of working RCF value.
• 1-99 minutes preset digital timer.
• Programmable Acceleration time.

Safety

• Safety Lid switch.
• Imbalance safety cut off.

KMS-16BF

• Brushless low noise AC Induction Motor with variable frequency % drive.
• LCD Display of Speed & time.
• 1-120 minutes Digital timer & infinite mode.
• Programmable Acceleration / Deceleration- range 40- 240 seconds.
• Dynamic Brake.
• Memory of last used program.

SafetyImbalance detection & safety switch off.Safety Lid switch

Technical Data

• (KMS-16D / KMS-16B)
• (W) 320 mm x (D) 410 mm x (H) 310mm
• Weight 20 Kg, Connected Load : 0.36 kVA,
• Max. Speed : 16000 RPM, Max. RCF : 17600 xg,
• Max. Tube Size : 5 ml, Max. Capacity : 32 ml

Blood Bank Centrifuge Technical Data

• (W) 860 mm x (D) 960 mm x (H) 965mm Weight: 285 Kg, Connected Load : 10 kVA, Max. Speed ; 4800 RPM, Max. RCF : 6000 xg, Max. Tube Size : 500 ml, Max. Capacity : 6000 ml.
• Our centrifuge has Swing Out Rotor Heads and multiple carriers for any Blood Bank Applications that is best dealt for a Centrifuge Model KBC

KBC Features

• Microprocessor built controls
• Installed 99 program memory
• Brush less induction in motor drives

Core Features

• Speed control up to 5000 RPM with 10 RPM increment.
• Temperature in the range -20°c to +40°c with 1 C Working temp range -5°c to 20°c.
• Preset timer range 1 to 120 minutes withi minute increment & infinite mode.
• User programmable Acceleration and Deceleration time range from 40 seconds to 450 seconds.

Other Features, Displays & Safety Systems

• Real time read outs of working RCF Value
• Pre-cooling and standby emergency cooling facility
• Programmed Emergency with manual lid lock release in case no power
• Easy Safety lid open
• An Imbalance indication
• Safety switch on/off mechanism
• Hydraulic hold
• Mechanical and Electronic lid with a lock & indicator
• Floor Model heavy duty unit with epoxy coated body and stainless steel chamber.

Dimension (W x D x H) mm: 860 x 960 x 965.

KHS-20D Features

• Step less speed regulator
• Digital speed Indicator,
• 1-99 minutes Digital timer & infinite mode.
• Zero Start interlock.
• Imbalance safety cut off.
• Safety Lid switch.
• Dynamic Brake.

KHS-20B Features

• Brushless low noise AC Induction Motor with variable frequency drive.
• LCD Display of Speed & time.
• 1-120 minutes Digital timer S infinite mode.
• Programmable Acceleration / Deceleration- range 40- 240 seconds.
• Dynamic Brake.
• Memory of last used program.

SafetyImbalance detection & safety switch off.Safety Lid switch.

Technical Data

• MHS-20D / MHS-20B)
• (W) 450 mm x (D) 570 mm x (H) 510mm
• Weight: 50 Kg, Connected Load : 0.75 kVA
• Max. Speed : 20000 RPM, Max. RCF : 34500 xg,
• Max. Tube Size : 100 ml, Max. Capacity: 400 ml.