K- Pack Systems Pvt Ltd.

Tardeo, Mumbai, Maharashtra

We are offering waste water treatment plant. Products wastewater treatment plant sewage treatment oil water separation unit dissolved air flotation units lamellasettlers turnkey project solutions in etpwtp wwtp pfr pipe flocculator corrugated plate packs products > wastewater treatment plant > oil water separation unit > tpi systems in the modern tpi system, the separating surface area is increased vertically by the addition of a number of parallel plates mounted at an inclination. This not only affords a dramatic space saving but also facilitates very small separating diameter. The k-pack tpi consists of a plate pack constructed of closely spaced corrugated plates inclined at a 45° angle or more, depending on the application. Waste water flows through these plated either parallel to the corrugations in "counter-current flow" or at right angles to the corrugations in "cross flow". Under laminar flow conditions, the short distance between the inclined plates is now the only distance over which the pollutants have to rise or sink before they are intercepted and separated from the mother fluid.

We are offering corrugated plate packs. The corrugated plate pack represent the very heart of our various purification systems consisting of a number of parallel corrugated plates (see photograph). These are framed in a housing and the whole pack is stiffened by a frame made from plastic material andor steel. The liquid to be treated flows through the spaces between the corrugated plates. Flow through the pack is laminar thus allowing the separation to take place under ideal conditions. In addition, much attention has been given to the profile of the corrugated plates. These have been chosen so that a smooth transfer and compaction of the separated particles is effected. To promote equal and uniform supply to the plates, specially designed flow baffles are used. In order to reduce the frictional resistance between the separated material and the corrugated plates to the minimum, particular attention was paid to the smoothness and hardness of the plate surface. The corrugated plates as well as the casing are made from glass fiber reinforced isophtalacid polyester resin. This material is resistant to the most frequently used chemical additives and temperatures. For applications under more aggressive conditions bisphenolic polyester resin or another suitable material is used. For erection and inspection purposes the plate pack has been fitted with lifting eyes so that it can be easily removed from or replaced into the installation. Upon request these plates can be made of other grp resins like orthopthalic acid, bisphenol and vinyl ester resins. Stainless steel packs have also been supplied as a special case.

We are offering dissolved air flotation units. Daf is a gravity seperation process whereby the separation of two phases is achieved by increasing the specific gravity difference of the two phases. This is achieved by attaching micro air bubbles, brought about by saturating water with air under pressure, and then expanding the wa terstream through valves to atmospheric pressure. These micro bubbles nucleate onto the solid particles to be separated, thus lowering the specific gravity and allowing contaminants to rise to the surface. suspended solids, grease and oil are very efficiently removed by daf, and a combination of screening and daf results in bodcod removals upto 60% depending on the application.however, a combination of flocculation and floatation can result in bod removals of around 80-90%.

We are offering lamella settlers. Lamella settlers are basically cross flow plate separators designed for removal of settleable solids.the water containing solids flows in a horizontal direction between the closely spaced plates in the plate pack. Completely laminar flow conditions are established while water flows across the plate pack from inlet to the outlet side. Solids with the higher density than the carrier fluid will settle down into the sludge compartment of the seprator, which is a sloped compartment to facilitate removal of the solid particles. The number and size of the plate is governed by the water flow rate and the settling velocity of the solid, which in turn are proportional to the diameter of the solids to be settled.

We are offering pfr pipe flocculator. Coagulation and flocculation by controlled turbulence the pipe flocculator is a plugflow reactor in which processes such as coagulation, flocculator, demulsification, precipitation and ph control can take place under hightly controlled and well defined conditions. the above mentioned processes take place under turbulent flow conditions. At the chemical injection points the pipe diameter is adapted to ensure instantaneous mixing of chemicals and wastewater. Through the cross-section of a pipe the mixing intensity is virtually homogeneous. Reaction time is determined by the pipe length and flowrate and based on the exact requirements, no excess is required. In the plug flow reactor the process can be influenced at any time as opposed to tank reactors, where only one conditions per tank can be maintained.

We offer Sewage Treatment. SBR is an activated sludge wastewater treatment system for removing dissolved and suspended organic materials and nutrients. In SBR all the unit operations such as aeration, settling and decanting are achieved in a single reactor, all by automatic operations. Due to this new technology industrial wastewaters can now be treated biologically in ideal conditions, regardless of flow or load variations. Phosphorous and nitrates can be removed biologically as well.