Konark Filters Pvt Ltd

Satara Road, Pune, Maharashtra

Major applications include, but not limited to

Mineral, Paint & pigments, Pharmaceutical, Bio-technology, Petrochemical, Food and food processing, Fertilizers, Sugar, Distillery, Edible oil, Coal, Cement, Engineering, Metal finishing, Oil-water separation, Coolants, Textile processing, ETP, STP etc.

Salient Features:
	Effective separation and recovery		Pneumatic or hvdro-pneumatic cake dewatering
	Closed chamber filtration, cake washing and dewatering		Reduces exposure of hazardous streams
	Easy CIP cleaning and quick change over in multiple product applications		Avoids cross contamination
	Leakless chamber locking arrangement		Roll form reusable filter cloth
	Uniform and horizontal cake formation		Least 0 & M costs
	Easy inert gas blanketing		MOC as per requirement
			Other

Operation:The upper chamber is Feed chamber and the lower one is Filtrate chamber. A suitable reusable filter cloth is operational in between the chambers. Depending upon the configuration, one of the chamber is kept fixed and the other moved up & down. The moving chamber is assisted with locking arrangement. The operation of filter can be broadly divided into 4 stages. Filtration, cake washing, dewatering and discharge. Additional sequences can be adopted depending upon requirement

Filtration :Feed and filtrate chamber are held pressed with each other with reusable filter cloth in between them. Liquid Is fed in the feed chamber. Suspended solids start getting accumulated on the filter cloth. Clear filtrate passes into the filtrate chamber and flows out. After sufficient build up of cake sensed by pressure switch or the time limit. whichever happens earlier, filtration cycle comes to an end.

Cake washing :Cake wash liquid is fed Into feed chamber for effecting replacement cake washing. Washed liquid can be collected separately. Multiple type cake washing can also be done.

Dewatering :The formed cake inside the feed chamber is squeezed either pneumatically or hvdro-pneurnancatlv. All the held up liquid inside chamber and the voids of suspended solids is removed out and taken for further processing. Hot air can now be fed into the chamber for further drying of solids.

Discharge :The locking dts-enqaqas the two chambers. Drive motor starts to discharge Out the solids.After complete discharge the two chambers close in again to start the next cycle.

Applications:Valuable chemicalsSolventsHazardous chemicalsMultiple product linesR & d and pilot plant applicationsFor ascertaining vario LIS filtration parametersDynamic, ever changing and confidential product developmentAll industries having filtration unit operation

Operation :
The upper chamber is feed Chamber and lower one is filtrate chamber.A reusable filter cloth is operational in between the chambers.One of the chamber is kept fixed and the other movad up and down.The Moving Chamber is assisted with locking arrangement.The operation of the system consist of filtration. dewatering and sludge discharge

Salient Features:
	Compact and specially developed for large sludge generation for large baths		No recurring cost
	Obsolesces filter press, tilted plate separator etc.		Reduces wastage of chemicals
	Crystal clear filtrate		Reduces load on etp
	Highly dewatered sludge for disposal		Reduces quantity of hazardous waste taken out for disposal
	Gives great control on the phosphating process		Enhances house keeping and EHS compliance.
	Improves quality phosphating		Least maintenance
			Fully automatic PLC base system
			Has helped many phosphating users in India

Kombelt-Mono

Is suitable for all types of etp and stp sludge, like, chemical, biological, primary, secondary, or mixture of them etc.

Even oily sludges are also effectively handled by this range of filters.

They come in 4 different sizes catering from 10 cu.m to 400 cu.m/day of sludge flow.

They are fully automatic needing very little manpower supervision or intervention.

They are engineered in a way that would require very least maintenance and is carried out very easily.

State of the art modern manufacturing set up with 5000 sq.ft construction. We invariably look to build fully automatic and manpower independent systems. R & d and innovation is our leading light. Have modern facilities to conduct such activities related to filtration.

Benefits : Economical filtration solutions.Reduce suspended solids in mainstream flowEasy to retrofit.enhances housekeeping and EHS compliance.Reduces energy and chemical consumption more then 10%

It retains the cake and moves together with the belt. Various MOC, porosity, weaving type ere. are available. The box at its tops-de has two lips covered with low friction synthetic strip liners that seal through intermediate wear belts between the bottom side ofthe belt and the surface of the strips.