Our Product / Services
Surface Coating And Paint Equipments
2 Products availableGifts, Handicrafts & Artifacts
2 Products availableHeaters, Thermostats & Heating Devices
2 Products availableJigs
2 Products availableTesting Equipment
2 Products availablePolishing Machines
2 Products / Services availableOur Complete range of products are dust extraction unit, metal heaters, BOILER - cum - EVAPORATOR, HORIZONTAL CATHODE OSCILLATING UNIT and PRE-FILTER CHAMBER.
Sophisticated digital to simple non-indicating controls. Combination controls up to 150 amp capacity.
Excellent for DI spray rinse, precision cleaning and other applications. Electric inline water heaters with all titanium wetted parts.Sizes up to 144 kW.
A neat compact Dust Exhaust and Collector Unit is ideal for Polishing Motors. Separation of dust takes place in two stages, the heavy particles being deposited in the setting chamber, and finer dusts arrested by the filter bags. Capacity : 500 cfm, 1 h.p., 2 Nos. 4.5 dia Inlet, 8.5 x 6.5 Outlet, 60 sq. ft. filtration area.
These fabricated Baskets and Trays are suitable for alkaline cleaning and acid dips. Made out of Stainless Steel/M.S./Titanium wire mesh or perforated sheets, in sizes from 6 x 5ht. onwards, with fixed or collapsible handle. Rectangular trays are also available from 10 x 6 x 2 ht onwards with fixed handle, for multiple purpose utilities
Rod Insulators or Insulating block made from chemically inert material to give perfect insulation between bus-bar and tank. Available in size 1/2", 3/4", 1" and higher.
Variety of materials to match your application (titanium, 316 stainless, 304 stainless and plain steel). Sizes up to 54 kW.Standard and custom configurations for over the side and bottom installations.
Heat exchangers designed and built to your specific application, including simple U coils, single and multi bank grid coils, helical coils, serpentine coils, standard and custom designs.
his custom fabricated special equipment is for multi-purpose utilities like Hot Water Curing System or Evaporation of Drag out, Process baths, Rinses to reduce Waste Water Volume. The concentrate is returned to the process or pumped out for disposal. Single or double chambered in MS, SS, (also in PVC or PP) with sources of gas, steam and electric heat, controllers and safety fittings. Additional fittings like transfer pump, combination of auto-fill and clean out systems, steam or hot water steam atomizing chamber, etc.
In Cathode rod movement unit, the cathode rod (or sometimes the anode rod) slowly moves back and forth to 6, 4 or 2 amplitude of strokes, over rollers fastened on the tank flanges. Unit can oscillate single or double Cathode powered by 0.125, 0.25, 0.5 or 1 h.p. motor, any fixed speed from 6 to 18 cycles.
Plating Jigs or Racks are useful where the output is large and even for distribution of electric current. Other advantage uses are a good deal of saving inlabour, time and ensures speedy loading increasing productivity reducing production costs. Jig Spines are made from Copper, Brass, SS or Titanium and contact tips are from tempered Stainless Steel, Phosphor Bronze or Titanium Wires.
igs are to be used for Electroplating, Electro polishing, Painting and Anodizing. For surface treatment such asPhosphating, Electro painting and Enameling, jigs can be used and these are termed as furnace furniture. Jigs made of Titanium are to be used for anodizing / electro polishing. Jigs can be designed, fabricated and insulated according tocustomersrequirements. The following details are required while enquiry/order :
(a) Cathode rod diameter or cross section.(b) Vat depth, solution depth, nature of solution and temperature.(c) Spine style, contact style and configuration.(d) Distance between Cathode rod and Anode bus bars and Rectifier Capacity.(e) Nature of articles (if possible samples should be sent).
IG MATERIAL FOR PLATING & ANODIZING |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Connectors made of Brass are available in single way and double ways. Thediaof connectors will be ", 3/4" & 1" or higher sizes. Also available clamps for strip conductors; cable and bus bar connections.
Bag, Carbon or Cartridge individually or in combination) : This is an on-line filtering device with or w/o pump set for flowupto5000 lit/hr.upto10 micron with replaceable filter bags, activated carbon or filtering cartridge. Must for contaminated plating solution or water containing excessive dissolved solids, thereby enhancing efficiency of filter / DM water plant.
Heavy Duty Buckets are available in capacity: 10, 15 & 25litres, with or w/o perforation for dipping and rinsing operations. Also available tailor-made PP/PVC baskets with or w/o perforation.
HI 9828 : pH, pH/mV, ORP, % saturatoin DO, mg/L DO, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure, fast tracking & logging and temperature, all in one unit !
Ideal for most acidic chemistries. Metal grounded quartz sheathed heaters up to 30 kW. Polypropylene guards standard.
Excellent chemical compatibility. Rugged construction with perforated guards
Compatible with virtually any chemistry. Sizes up to 27 kW. Large variety of standard and custom configurations for over the side and bottom installations.
HI 98301 (DiST1) : 1999 ppm (mg/l); 1ppm;Rs.2, 856/-
12) HI 98302 (DiST2) : 10.00g/L (ppt); 0.01g/LRs.2, 856/-
13) HI 98303 (DiST3) : 1999 S/cm; 1S/cmRs.2, 856/-
14) HI 98304 (DiST4) : 19.99mS/cm; 0.01 mS/cm;Rs.2, 856/-
15) HI 98311 (DiST5) Combo: Waterproof, 3999S/cm/ TDS 2000ppm / Temp. 60 C;
Rod Heaters are having replaceable element and Tubular Heaters (Straight 'U' 'L' & Hair Pin Shapes) are having non-replaceable elements. Vertical Mounting, meant for all Electroplating and Metal Finishing Processes. For horizontal mounting these heaters are supplied with threaded flanges. Available from 0.5 to 5.0 KW capacities in single or 3 phase operation.
1)HI98190
Waterproof Portable pH/ORP Meter
2)HI98191
Waterproof Portable pH/ORP/ISE Meter
3)HI98192
Waterproof Portable EC /TDS /Resistivity /Salinity Meter
4)HI98193
Waterproof Portable Dissolved Oxygen and BOD Meter
Common Features
>Ergonomic, rugged, water proof (IP67) design
>Data logging
>GLP Features
>Contextual help at the press of button
>Backlit, Graphical
>PC Connectivity
>Auto Calibration
In this Salt Spray Apparatus Chamber, coated articles viz. Electroplated, Painted, Anodising, etc are exposed to a mist of salt. Saturated air produced by spraying common salt solution in an enclosed Cabinet. The articles being positioned for this accelerated corrosion test in such a way that they are exposed to the hot mist produced in the chamber, through the controlled andregulatableair and liquid nozzles. |
Standard sizes: The apparatus comprising of Double Chamber FRP body, having internal size :850 x 655 x 825 mm ht., Dome roof, volume 455ltrs, suitable for housing 120 Numbers of standard panel size : 150 x 100 mmHumidity ChamberWater level controllerHumidity ControllerMica plate heatersTemperature indicator 500C display cum - controllerfiltered salt solution feed of min 0.5 liters per hour130litressalt solution reservoirPeristaltic PumpLarge specimen testing capacityEasy access to test panelsHour counterControl panel with main switch. |
Today we have several options to select the material of construction in plating Tanks for solving corrosion problems. They are durable and cost effective. Plain double welded tailor-made self-supporting tanks of any shape & dimension and volume as desired can be adopted for Storage, Electroplating, Electropolishing, Anodising, Phosphating, Pickling and other Process requirements. Fabricated from Rigid Polyvinyl Chloride (PVC), Perspex, Polypropylene, Linear Polyethylene, Polyglass(PP), CPVC, PVDF, StainlessSteel 304/316, Mild Steel etc. supplied with rim, reinforcement and legs. All the tanks externally coated with acid & alkali resistant epoxy paint or FRP inIsotholic, BisphenolorVinylplastersResins.
The cleaning machine in which a water based cleaning cycle is carried out on the small components in an enclosed cabinet. This process involves hot alkaline cleaning fluid (2 to 5%) in a rotary spray system with in washing cabinet, pump, heater, filter & chemicals.
Optional : Steam Extractor, Dosage equipment, Oil Skimmer and Automatic water refill.
Wide variety of heater types and features to fit virtually any application. Stainless, titanium, fluoropolymer and other materials. Sizes from screw plug to 14 flanged.
These Industrial Water Cooler or Packaged Water Chillers are :
CompactReliableDurableQualitative
Smooth Performanceand ready to use units forELECTROPLATINGandANODISING.
The Capacity is 2 to 15 T.R. flow rate 600-6000 LPH and have some of the best desirable features and quality components like:
Suction gas cooled hermetically sealedCompressor;Air cooledCondenserwith special fins giving high heat transfer coefficient;Refrigerant Pipinghaving All colour coded design as per ASHRAE norms, fitted with filter Dryer, Inspection glass and leak test with dry Nitrogen at 400 psi. Evacuated upto 50 microns before charging; SuctionAccumulatorsupplied as standard equipment;Control Panelwith fuses, switchgears, relays, electronic timers, Connectors with full function control, Wiring colour/number code; Accessories Integral Tank, Chilled Water Pumps with mechanical seal; dependable Safety Relief Valve, Low & High Pressure cut-outProtection;in sturdyconstructionand skid mountedinstallation
General Technical Specifications For 100C Process Water at ambient temp. 350C
Models | KWC-1 | KWC-2 | KWC-3 | KWC-4 | KWC-5 | KWC-6 | |
Cooling Capacity |
kcal/hr |
2250 |
3000 |
4500 |
6000 |
9000 |
15000 |
The plain fabricated tanks can be supplied with "drop-in" liners internally to suit the individual process application. Lining such as Semi-hard Rubber, Lead (loose, patch bonding or full bonding), Antimonial/Lead. Tin/Lead lining, Stainless Steel, Rigid P.V.C /Polyglass(P.P.) / PVDF Flexible (PVC) / CPVC, Fiberglass-reinforced Plastics (FRP) SprayGalvanising, etc. are in general for various corrosion resistance applications.
This Tin/Solder Coating Machine is used for coating the Tin or Solder (or other metal) on Printed Circuit Board. This improves thesolderabilityand protects the PCBs. The clean drilled PCBupto310mm width (also available 450 and 600mm) is passed between the coating rollers, rotating at 0.25r.p.m. The bottom roller transfers tin or solder alloy for the PCB, and the top roller applies uniform pressure for uniform coating. The metal bath is of 7kgs.capacity, duly insulated and fitted with an electronic temperature controller, 2x0.75 KW heater, 12V DC high torque, variable speed motor, with AC lower drive housing AC input 230V, 50cycles. The unit is housed in stainless steel body or coated with special epoxy coating to ensure durability. Also fitted with Mains, on-off switch, Heaters on - off, Controls & Indicators are housed in a separate or built-in control console.
n range 3, 5 & 7.5 H.P. in 3 phase 3000 RPM mounted on Heavy duty C-I stand, complete with push button starter & wheel guard.:
SPECIFICATIONS | |||||
MODEL | H.P. | KW. | PH. | RPM | SPINDLE |
KPM-11 KPM-12 KPM-13 KPM-14 KPM-15 KPM-34 KPM-35 KPM-36 KPM-37 KPM-38 |
0.25 0.33 0.50 0.75 1.00 1.00 2.00 3.00 5.00 7.50 |
0.18 0.25 0.37 0.55 0.75 0.75 1.50 2.25 3.75 5.50 |
1 1 1or 3 1or 3 1or 3 3 3 3 3 3 |
2800 2800 2800 2800 2800 1400 2800 2800 2800 2800 |
100 165 165 165 165 165 200 220 220 220 |
Special Barrelling Units are made to meet production requirement. The unit on left side is for a hoist lifting mechanism having plating & rinsing tank attachments, while on right is two Barrels plating set up with fittings for doubling output. Any type of tailor made Barrel can be designed and fabricated.from5 kg to 80 kg capacity.
Mechanical Seal type in fabricated PP, UHMW and SS 316 MOC having a wide ranges from Lab. Model of 12 x 12 mm 1 M3/H, 1 M. Head to bulk Industrial design of 100 x 75 mm, 105 M3/H & 70 M. Head and 0.125 to 20 HP motor. | ||
|
SPECIFICATION OF MAGNETIC DRIVE PUMPS | ||||||||
MODEL | Hose Connected |
Max. capacity lpm |
Max. head M |
Standard M./lpm |
S.G. | Motor Watts | ||
KMP-10 KMP-15R KMP-20RM KMP-30RM KMP-40RM KMP-55RM KMP-70RM KMP-100RM KMPH-400 KMPH-401 |
14 |
14 |
12 |
1.5 |
1-8 |
1.1 |
6 |
1 |
Heavy duty buffing machines from 0.25 to 7.5 H.P. are available in two or four ball bearings. Construction of the machines are made sturdy and robust to offer vibration free performance. All Bench Polishers are equipped with reversely, threaded tapered spindles to take buffing mops.
Aqueous Industrial Ultrasonic Cleaning machines are manufactured indigenously to high International specifications. Available in various standard capaciters and also non-standard models for specific requirement.
Ultrasonic Power at high frequency-normally 30Khz (also available in range 23 Khz to 40Khz) is fed to piezo electric transducers (PZT). The electrical power is converted to mechanical vibrations by these PZT. The transducers are bonded to the bottom (or on sides in some applications) of the SS tank containing cleaning solutions. The mechanical vibrations are transferred to the liquid through the tank surface, creating microscopic bubbles - known as cavities in the liquid, which implode with high pressure forming brushing effect on the surface of the components to be cleaned. As a result the contamination is removed. These cavities being microscopic can reach inaccessible crevices, holes in the components where manual cleaning with brush is impossible. The cleaning agent normally dissolves the contamination leaving only the sediment that is not dissolved. Single stage ultrasonic cleaning system is useful with Neutral, Alkaline liquid or mildly Acidic solution.
Dryers are mainly used for speedy drying of small articles after dipping, plating or other wet operations. It eliminates the use of sawdust. The electrically heated dryer body is safe and robust construction, easy to operate & maintenance free. Stain-free evergy-saving and fast drying. Space saving and compact design.
FEATURES:
Ÿ Pedal for starting Machine which also operates locking bolt, when the dryer is running (if the lid is of side opening design)
Ÿ The perforated basket is easily removeable for quick emptying, made of MS duly galvanized or stainless steel.Brake control operated by foot lever for rapid starting and stopping.
Ÿ Ball Baring Housing for smooth running of Center Spindle.
Ÿ Grease / Cup Lubrication for regular maintenance.
Ÿ The Motor is driven through V-belt and fitted with a starter, start & stop pedal.
Ÿ Electrical heating elements are replaceable and activated only when the dryer is on.
Ÿ The basket and the flywheel are balanced to minimize the vibrations.
SPECIAL OPTIONAL ATTACHMENTS: | ||
| ||
OTHER DRYERS: | ||
|
TECHNICAL SPECIFICATION:
|
||||||||||||||||||||||||||||||||||||||||||
|
Conductivity and capacitive style controls for the ultimate in reliability. Multi-level controls available. .
This is one piece economical model, on Coulometric principles, on destructive bases for measuring thickness of plating like Brass, Cadmium, Chromium, Copper, Gold, Lead, Nickel, Silver, Tin, Zinc & Alloy plating on ferrous , Non Ferrous and Non Metals bases. This Digital unit can be used for determination of thickness of almost all Combinations of Standard Plating or Metallic Coating on Magnetic base like Mild Steel, Nickle, Cobalt, S.S. etc. Non Magnetic Base like Aluminium, Brass, Cadmium, Chromium, Copper, Silver, Tin etc.
Engineered specifically to your needs. Spiral plate, tube-in-tube and other designs available.
Vertical Etching Machines are designed for modern etching of Line andHalfoneplates (copper or zinc), aluminiummetallables, also etching of printed circuits boards by conventional process. These machines are made of acid resisting PVC such as nitric, chromic, cupric and ferric chloride. The thickness of PVC sheet is 5 mm, and mounted upon an iron base provided with anti-rust paint. The acid tank is fitted with a plastic tube for draining out acid. There is also a fume exhaust to let out the acid fumes to conform to the Factories Act Regulations. Plastic cover for motor is provided to safe guard the motor from acid. | |
Model |
KEM 1 |
KEM 2 |
Max. plate size |
4 plates of 30 x 38 cm |
4 plates of 40 x 50 cm |
Etching time |
4 minutes |
4 minutes |
Bath capacity |
30 litres |
60 litres |
Floor space |
55 x 55 cm |
80 x 80 cm |
Overall height |
100 cm (40") |
140 cm (56") |
Motor |
1/4 H.P. 1/220/50 A.C. |
1/4 H.P. 1/220/50 A.C. |
Rinsing ratio |
acid : water 1 : 5 |
acid : water 1 : 5 |
Solid-liquidseperationdewatering hazardous wastes, sludges, reclamation of solids and recovery of chemicals solution. Recessed, gasketedPP plates with manual or air operated Hydraulic enclosure having modelsupto50 cu. ft., plate sizes 355 x 355 mm to 1200 x 1200 mm. Used by Chemical Mfrs. and in Effluent Treatment Plant. | |
Are commonly available in form of Plates, Flats, Oval, Dog Bone, Rounds, Nuggets, Balls, Pallets, Crowns or Coins, for plating like : | ||||||||||||
|
Hull Cell 267 ml in Perspex or PVC plain body; and with fittings like air agitation coil, air pump or reciprocating agitator, immersion heater, thermostatic control, polished brass and MS cathodes, wire and wireclips, special hull cell anodes hot water bath controls, 0-60 min. Timer, glass thermometer 1000C, DC rectifier for ripple free power supply 0-8V/0-5A or 0-12V/0-10 Amp., supplied as a kit or in loose parts
This is an attachment to the overflow collection tank in cleaning system, in which oil contaminated cleaning solution is coming in contact with a rotating disc and scraper. This while in motion separates oil from the fluid surface to give double benefits namely, Cleaning solution is recycled which enhances the service life of cleaning bath and oil can be reused after filtration.
| |
Cartridge type filtration units comprising of seal type PP chemical pump orseallessmagnetic drive powered by AC motor of PVC, PP or CPVC non metallic corrosion proof maintenance free filter chamber (also in S.S.) with cartridge type filter elements and standard fittings. |
MODEL |
CAPACITY |
Filtering |
KC-F-1 |
200/100 |
1.75 |
Unique or difficult applications are our specialty. Configurations available include: lab heaters, flexible riser heaters, phosphate heaters, deep tank heaters, Varipower TM heaters, EASYPLUG
TM heaters, etc.
made from Polypropylenefibrein spun cloth or yarn wound. Granular Activated Carbon filled Cartridge is also supplied either loose or with on-line housing. Disc type PP filter cloth media in woven or non-woven available open or stack form. Also P.P. or Polycarbonatemouldedfilter housings.
A new concept in the Polarity Changeover Switch, replacing vertical plate, mounted manual unit. This Heavy duty, Double Pole Double Throw (DPDT) Knife Switch fixture is horizontal ranging upto 10000 Amps DC current, powered by 3 hp Motor through Geared Box, separate Control Panel working on Remote Control mode.
This set in a briefcase or wall mounted cup board provides all the Apparatus and re-agents necessary for carrying out regular tests, to estimate the contents like metal, the free cyanide, chloride, boric acid or causticity etc. in various solution. Reagents, and methods of analysis are supplied with the sets. (While ordering, please specify the type of plating solution desired to be analysed and which are the items to be determined from such solution so as supply the kit accordingly).
These turbine blowers consist of a dynamically balanced impeller which revolves in a stator cum-compression chamber supplies oil-free compressed air, non-pulsating flow, friction & vibration free, low maintenance, compact, light weight unit with large & forceful suction and pressure are required in agitation of chemicals.
| |||
SIDE CHANNEL BLOWER | |||
Model |
Capacity M3 / Hr |
Pressure Mbar |
Motor HP |
KA-TB-SC-01 KA-TB-SC-02 KA-TB-SC-03 KA-TB-SC-04 KA-TB-SC-05 KA-TB-SC-06 |
50 160 175 240 270 300 |
60 150 160 175 185 210 |
0.25 0.5 0.75 1.0 1.5 2.0 |
| |
|
PERFORMANCE DATA
|
|||||||||||||
|
These are small application oriented filter units, especially designed for precious metal plating operations. Table top model with plate type filter stack, portable, mostly with magnetic drive, sealless, PP Chemical Pump powered by 1 or 3 phase motor.
|
SPECIFICATIONS |
|||||||||
|