We are offering dust collector Cartridges which are made spun bonded polyester to provide high quality surface filtration. This unique and hard finished materials provides features of good pleat ability, excellent stable structure, fine dust release & good resistance of particle more...
A pre-filter is an integral part of almost any air purifier that you see on the market. It's the first stage of filtration, and it essentially helps to capture large particles . This prolongs the life of your filter, and it makes your system much more efficient.more...
Prefilters are designed to remove particles down to 3, 5 or 10 microns (identified as super, standard and junior) at retention efficiencies 99%, 98% and 95% respectively when tested as per bs 2831 using test dust ii. The fiber glass media (4, 2, 1 layers respectively for 3, 5 & 1more...
AFi Pocket Cubes are made with a two-stage 100% non-woven polyester media. The seams of all AFi Cubes are sewn together for maximum durability. The Internal Supported Cubes use a heavy-duty internal wire frame for added rigidity. The back panels of the Unitized Cubes are fastenedmore...
Our HEPA (High Efficiency Particulate Air) filter is constructed from high quality wet laid micro-glass media and uses corrugated aluminum separators. The pleat pitch is designed for minimum air flow resistance and the spacer edges are 'safety rolled' to prevent media puncture. Tmore...
Efficiency as per B. S. 2831, Test Dust No II & III : : 98 to 99.97%.
Initial Pressure Drop : : 10 to 25 mm. of wg.
Product Name : : Mini Plate Hepa Filter
Filter Grade : : EU 6 to EU 13
Model : : CMP Series
Recommended Air Velocity : : 0.5 to 1.5 mtr./sec.
Media & Constraction : The basic media of these filters are either glass fibre paper or cellulose and synthetic fibre mix paper. The seperator used are hot melt type and are suitable to work upto temp. of 100 C. The media is encased in aluminium, G.I. frame with no metallic spacemore...
Efficiency as per B. S. 2831, Test Dust No II & III : : 99.97%.
Filter Grade : : Absolute
Media & Constraction : Filter media fabricated from water repellent 100%micro glass fibre paper pleated over corrugated aluminium/paper board seprator, encased in an GI /Al frame.Neoprene sponze rubber sealing provided for leakproof sealing Application : Cleanroom of class 1000 &more...
Efficiency as per B. S. 2831,
Test Dust No II & III : 98 to 99.97%.
Product Name : : Mini Plate Hepa Filter
Recommended Air Velocity : 0.5 to 1.5 mtr./sec.
Initial Pressure Drop : 10 to 25 mm. of wg.
Filter Grade : EU 6 to EU 13
Media & Construction :- The basic media of these filters are either glass fibre paper or cellulose and synthetic fibre mix paper. The separator used are hot melt type and are suitable to work upto temp. of 100 C. The media is encased in aluminium, G.I. frame with no metallic spacmore...
Media & Construction :- Filter media fabricated from water repellent 100% micro glass fibre paper pleated over corrugated aluminium/paper board separator, encased in an GI /Al frame.Neoprene sponge rubber sealing provided for leakproof sealing Application : Cleanroomof class 1000more...
Product Name : : Pocket Type Bag Filter with housing
Efficiency as per B. S. 2831, Test Dust No II & III : : 90 to 99%.
Media & Construction :- It is made of hyloft, HDPE, Synthetic Felt, sandwiched with nylon cloth / tissue, PES (2 to 12 Nos.). Pockets are made in a metallic frame to makes its fitment easy. Application : It is applied in air ventilation system e.g. sophisticated industrial assembmore...
Testing and certification for this range of filters has been sadly lacking in our country. For many years, and right upto the present time, efficiencies for this range of filters are reported in terms of BS 2831, which is an obsolete standard.Current international norms call for more...
Our 'hot-melt mini-pleat' filter design configuration increases its energy efficiency due to lower pressure drop in comparison to conventional deep pleat HEPA. The 'Spectra Mini-Pleat' filters are thus the lowest cost filters to operate over the filter's life. In new applicationsmore...
The Caracas of the plenum will be made of extruded aluminum sections in such a manner that the air is passed only through the filters only. Plenum unit for laminar flow diffuser will be made of thick aluminum sheet. The complete unit will have factory prepared fine sealing systemmore...
The packaging commences under the strict supervision of experts and other team members; they ensure that the products are packed sternly to circumvent loss during transit. Delivering the orders on time is one of our specialties for which we are highly admired by the clients. more...
We are offering hepa filter, absolute filter. Application for hepa absolute filter mainly use in hospital , operation room, computer room, electronic room & precision industry. Construction made of al. (0.04 mm – 0.03mm)corrugated foil. Fold are separated by hv paper. These aremore...
SAF MB Series Melt Blown [M5-F9] MERV-8-16 The pockets are manufactured from 100% polypropylene fibers laid on a colored polypropylene carrier material. The unique weld pattern design ensures that pockets inflate easily without touching adjacent pockets giving evenly distributed more...