Drilling Rigs in Kolkata

• MOQ : 1 Piece Piece(s)
• Length : 1220 mm (4'FT)
• Brand Name : LCC
• Material : Stainless Steel
• Flushing Hole Size : 9.2 mm
• Weight : 7.2 Kg

more...

• Brand Name : LCC
• Weight : 21.5 Kg
• Color : Black
• Flushing Hole Size : 9.2 mm
• Length : 3660 mm (12'FT)

more...

• Length : 3050 mm (10'FT)
• Surface Finishing : Color Coated
• Flushing Hole Size : 9.2 mm
• Brand Name : LCC
• Weight : 17.9 Kg

more...

• Capacity : 80 meter
• Automatic Grade : Semi Automatic
• Surface Finished : Paint Coated
• Application : Mining
• Driven Type : Hydraulic
• No-Load Speed : 400 RPM
• Brand Name : Voltas

more...

• Rod Diameter : 10 mm
• Application : Mining
• Matrial : Carbide Tipped
• Length : 3 Meter
• Feature : Excellent Quality, Fine Finishing

more...

• Application : Mining
• Material : Stainless Steel
• Length : 60-100 mm

more...

• MOQ : 1 Piece
• Length : 780 mm
• Vibration : 2100 Blow Per Minute
• Material : Alloy Steel
• Air Consumption : 350 cfm
• Original : Original Make also available
• Brand : IMT
• Air Pressure : 90 cfm
• Chuck Capacity : 38.10 mm ( Hole Dia - 48 to 75 mm)
• Discount : On quantity order.

more...

Integral Drill Steels are normally produced from 19mm (3/4" ), 22mm ( 7/8") or 25mm (1") Hexagon Drill Steel, where the dimensions given are measured across the flat of the hexagon. Integral Drill Steels are a fixed length with a shank at one end and a bit at the other, and are able to drill to a depth equiva more...

• MOQ : 1 piece
• Application : Heavy Constructional Drilling Work
• Weight : 100-1000kg, 1000-2000kg
• Driven Type : Hydraulic
• Hole Diameter : 200-300mm, 400-500mm, 500-600mm, 700-800mm, 800-900mm
• Condition : New
• Feature : Easy To Operate, High Performance
• Drilling depth : 1000-1200feet, 200-300feet, 300-400feet, 400-500feet, 500-600feet, 600-700feet, 800-900feet
• Automatic Grade : Automatic

Radiant series 7000 Hydraulic Drilling & Bolting Rig are rotary roof bolting machines with dust suppression system suitable for drilling vertical holes of 27mm to 43mm diameter and anchoring of roof bolts in underground mines in strata hardness up to 600 kg/cm2. It is totally indigenous equipment with mod more...

Radiant Hydraulic Face Drilling Machines (with Dust Suppression System) have been developed with an idea to achieve Wet Drilling on Coal Faces to avoid fatigue from coal dust to the operators. It is faster than any other conventional Drilling Machines & is also suitable for Drifting application in Sand St more...

• MOQ : 1 Piece(s)
• Travel Length : 3940 mm, 2200 mm, 1500 mm
• Feed Beam Length : 5430 mm, 4425 mm, 2825 mm
• Maximum Torque : 900 Nm
• Suitable hammer : 3", 4" Hammer
• Operating Pressure : 12 bar max.
• Driving Force : Piston type Rotation Air Motor (Type BBR-4)
• Hole Diameter : 85 - 130 mm
• Version : Down the Hole Hammer (DTH)
• Air Consumption : 450 cfm at 10.5 bar

The  DTH Hammer version of RMT Wagon Drill  is equipped with powerful piston type  air motor (BBR -4 type)  which is suitable for  DTH hammers of 3” and 4” . Possible drill hole sizes are 85 to 130mm and drilling depth up to 40 meters. With a quick  conversion kit,  the DTH version can be converted more...

• Drill Steel : R32 / R38 / T38
• Drilling Depth : 20 - 40 meter (66 feet - 131 feet)
• Details of Feed and boom : As below
• Feed Beam Length : 5430 mm, 4425 mm, 2825 mm
• Version : Top Hammer
• Hole Diameter : 48 - 76 mm
• Air Consumption : 400 cfm at 7 bar
• Drill Steel Length : 1.20 Meter, 2.50 Meter, 3 Meter
• Feed Type : Chain Drive
• Pneumatic Drifter : RMT 120F | BBC 120F

The  Top Hammer version of RMT Wagon Drill  is equipped with very high performer  pneumatic drifter “RMT 120F”  which is the same as  “BBC 120F Drifter” . The drifter comes with  Rifle Bar Rotation  feature. With a quick conversion kit, Top Hammer Version can be  converted to the DTH version  more...

• Minimum centre length of hole from ground : 125 mm
• Depth of hole - Vertical : 30 mtrs.
• Weight (Appx.) : 700 kg
• RPM : 0 to 50
• Width of rig : 600 mm
• Drill pipe size : ⌀ 76 mm
• Drill pipe length : 1.5 mtrs.
• Hole ⌀ : ⌀ 90 mm to ⌀ 150 mm
• Rotation unit : 4.5 HP
• Height of rig : 3250 mm

LD4 is a pneumatically operated drill capable of drilling holes in both down the hole & top hammer modes, ideally suitable for drilling lead holes for diamond wire cutting of decorative marble, granite rock, etc. This machine has been specially designed keeping in mind operator suitability, so it consists of more...

• Usage/Application : Mining
• Country of Origin : Made in India
• Supply Type : Manufacturer
• Brand Name : Wesbendia-Drill

more...

• Supply Type : Manufacturer

• Country of Origin : India
• Type : Drilled Screws

Products are manufactured to API Spec. 77-1 and API RP7G more...

NC26, NC31, NC38, NC40, NC46, NC50, NC50 more...

We offer a wide range of Wagon Drill Machine which includes Pneumatic Wagon Drill, Slim Drill Machine and Wagon Drill Rig. By using high grade raw material, the Wagon Drill Machine is offered with the robust locking arrangement. The Wagon Drill Machine is fixed on wheels that help it to shift properly and abl more...

By using high-grade raw material, these Wagon Drills are offered with the locking arrangement. These Wagon Drills are fixed on wheels and help them to shift properly and able to drill holes from horizontal to vertical. Available in the diameter of 102-114 mm, these Wagon Drills are offered at affordable rates more...

We offer Drill Rods of seamless and ERW. Our range of Drill Rods comes with superior surface finish and tolerance, which drastically reduce the risk of scaling from the pipes entering the hammer. The joints of these Drill Rods are welded to ensure maximum strength and the threads of the end-pieces are heat tr more...

We are offering Drill Rods more...

  Key features of a high quality DTH pipe are durability, accuracy and manageability. Atlas Copco Secoroc pipes are made from cold drawn piping, providing a superior surface finish and tolerance compared to conventional pipes made from hot rolled piping. more...

  Atlas Copco's range of surface crawlers raises the quality of rock drilling to a new level. The lowest cost per tonne of rock produced comes from the higher productivity; straighter holes and better overall economy are designed into the range. more...

We are a leading Manufacturer and Supplier of Drill Rods . Our Drill Rods are manufactured using the best industrial grade material. The Drill Rods are majorly used in Construction companies and Mining companies that are involved in breaking different types of stones and rocks. Our Drill Rods are highly durab more...