GST : 36AABCK7920K1ZC
Verified
Write a Review
Our Products
Drilling Job Work
1 Products availableHammers
1 Products availableHydraulic Cylinder Accessories
1 Products availableKLR DTH 1500 is mounted on heavy duty 6x4 truck powered by suitable engine. This is suitable for hole dia 6.5 (continuous), 9, 10 and 12(over burden) up to a depth of 1500 feet. Rotary head produces max.speed of 170 rpm and max.torque 280 kg.m. Power for the Rig is taken from truck engine through transfer gear box. Mast, Rotary head, control panel, compressor, Hydraulic tank, welding machine, battery box are mounted on the same truck.
The comprehensive range of Portable Water Well Drilling Rigs and Water Drilling Rigs of KLR DTHR-100 Portable offered by KLR are manufactured using high grade raw material, so that the end product is defect free. Appreciated for their excellent functionality, the rigs can also be altered to drill horizontal bores up to 100 feet. The unit is equipped with compressors, hydraulic system, and rotary head to ensure high speed and efficient performance.
Technical Specifications
| Technical Data | Description |
|---|---|
| Hole Diamete | 6.5"(Continuous)9",10" and 12"(Over burden) 8"(Continuous)12 ¼"(Reaming) |
| Depth | 100 Meters |
| Truck | 25.280 or 2516 / 2518 / As per customer request |
| Prime Mover | Truck Engine |
| Truck | 25.280 or 2516 / 2518 / As per customer request |
| Application | Water Well Drilling Rig |
| Formation | Soft / Hard / unconsolidated / Alluvial |
| Mast | Hydraulic cylinder with pulley and wire rope. | Maximum Pull up force - 8500 kgs | Maximum Pull down force - 4500 kgs | Reeving Ratio 1:3s | Maximum Pull up | |speed - 45 meter / minutes | Maximum Pull down speed - 60 meter / minute |
| Head | Max speed: 0- 170rpm | Maximum Torque: 300 kg.m |
| Hydraulic system | Maximum Working pressure 210 kg/cm2 | Pumps: Load sensing |
| Hydraulic Oil Cooler | 70gpm |
| Break out Wrench | Maximum Torque: 500kg.m2 | Cylinder bore: 80mm / 100mm | Stroke: 300mm / 350mm |
| Leveling Jacks | Four Hydraulic levelling jacks |
| Water Injection Pump | Triplex Reciprocating Pump Powered by Hydraulic Motor |
| Water Injection Pump | Triplex Reciprocating Pump Powered by Hydraulic Motor |
| Optional Attachments | Shock sub | Stem lock | Hole sweeper | Dust collector | Digital controls | Auto drilling | Auto Rod charger | GPS system | Driller AC cabin | Data logging system | Welding generator | Six Rod Carousal & Mud Pump. |
| Rod Changer | Manually operated rod changer to handle single rods with 1000 kgs. Capacity pull up winch to carry drill rods, casings and hammer tools |
| Mast Raising Cylinder | Bore: 100mm2 | Stroke: 800mm | Quantity: 2 No's |
| Air Compressor | Atlascopco XRH 1000 cfm - 300 psi or 1000 cfm - 275psi / As per customer request |
| Air Line Lubricator | 18 liters |
| Mud Pump | Capacity: 4½” X5" | Linear size: 4½” | Stroke : 5" | Flow : 500 lpm | Pressure : 17.21 bar |
The comprehensive range of KLR DTHR 300 drilling rig offered by us is widely used in DTH cum Rotary drilling rig which is suitable for hole dia 6.5” (continuous), 9”, 10” and 12”(overburden) by DTH Drilling and 8”(Continuous), 12 ¼ & 16”(Reaming) by Rotary Drilling up to a depth of 300 meters. These truck-mounted rigs use power from the truck engine through the transfer gearbox to ensure better performance. The rig has a box-type structure with excellent rod handling capacity. The pull-up and pull-down functions are performed by means of a hydraulic cylinder and wire rope in the equipment. We offer our products with additional attachments like welding machine, 6” x 8”mud pump.
Technical Specifications
| Technical Data | Description |
|---|---|
| Hole Diameter | 6.5"(Continuous)9",10" and 12"(Over burden) 8"(Continuous)12 ¼" & 16"(Reaming) |
| Depth | 300 Meters |
| Truck | CLA 26.280 / 31.230 / 25.280 / As per customer request. |
| Prime Mover | Truck Engine |
| Application | Water Well Drilling Rig |
| Formation | Soft / Hard / unconsolidated / Alluvial |
| Mast | Hydraulic cylinder with pulley and wire rope | Maximum Pull up force - 14500 kgs | Maximum Pull down force - 7500 kgs | Reeving Ratio 1:3 | Maximum Pull up speed - 45 meter / minute | Maximum Pull down speed - 60 meter / minute |
| Rotatory Head | Max speed: 0- 170rpm | Maximum Torque: 600 kg.m |
| Hydraulic system | Maximum Working pressure 210 kg/cm2 | Pumps: Load sensing |
| Hydraulic Oil Cooler | 120gpm / 150 gpm |
| Break out Wrench | Maximum Torque: 500kg.m2 | Cylinder bore: 80mm / 100mm | Stroke: 300mm / 350mm |
| Levelling Jacks | Four Box Hydraulic levelling jacks |
| Water Injection Pump | Triplex reciprocating pump powered by hydraulic motor |
| Optional Attachments | Shock sub, Stem lock, hole sweeper, Dust collector, Digital controls, Auto drilling, Auto Rod charger, GPS system, Driller AC cabin, Data logging system, Welding generator, Six rod carousal and mud pump.. |
| Rod Changer | Manually operated rod changer to handle single rods with 1000 kgs. capacity pull up winch to carry drill rods, casings and hammer tools. |
| Mast Raising Cylinder | Bore: 100mm2 | Stroke: 800mm | Quantity: 2 No's |
| Air Compressor | Atlascopco XRV 1200 cfm - 330 psi / 1100 cfm – 300 psi / As per customer request. |
| Air Line Lubricator | 18 liters |
| Mud Pump | Capacity: 6" x 8" | Linear size: 6" | Stroke : 8" | Flow : 1024 lpm | Pressure : 20.74 kg/cm2 | Optional : 6" x 8"(capacity) |
KLR DTHR 600 is powered by a 6X6 truck engine or separate deck engine. Based on the latest technology, these drills are used to drill water wells is suitable for hole dia 6.5” (continuous), 9”, 10” and 12”(overburden) by DTH Drilling and 8”, 12 ¼(Continuous) & 16”(overburden) by Rotary Drilling up to a depth of 600 meters. The rotation with direct circulation ensures that the drilling is done properly. A hydraulically driven 7 ½ “X 10” mud pump is also mounted on the same truck.
Technical Specifications
| Technical Data | Description |
|---|---|
| Hole Diameter | 6.5"(Continuous)9",10" and 12"(Over burden) 8"(Continuous)and 12 ¼" & 16"(Over burden) |
| Depth | 600 meters |
| Truck | AL 6 X 6 / 31.230 / 31.280 /As per customer request. |
| Prime Mover | Deck Engine or As per customer request. Horse Power : 320HP |
| Application | Water Well Drilling Rig |
| Formation | Soft / Hard / unconsolidated / Alluvial |
| Mast | Hydraulic cylinder with pulley and wire rope | Maximum Pull up force - 32840 kgs | Maximum Pull down force - 16085 kgs | Reeving Ratio 1:3 | Maximum Pull up speed - 35 meter / minute | Maximum Pull down speed - 45 meter / minute |
| Rotary Head | Max speed: 0- 170rpm | Maximum Torque: 1300 kg.m |
| Hydraulic system | Maximum Working pressure 320 kg/cm2 | Pumps: Load sensing |
| Hydraulic oil cooler | 120gpm / 150 gpm |
| Break out wrench | Maximum Torque 500kg.m2 | Cylinder bore 80mm / 100mm | Stroke 300mm / 350mm |
| Leveling jacks | Four Box Hydraulic leveling jacks |
| Water injection pump | Triplex reciprocating pump powered by hydraulic motor |
| Optional attachments | Shock sub, Stem lock, hole sweeper, Dust collector, Digital controls, Auto drilling, Auto Rod charger, GPS system, Driller AC cabin, Data logging system, Welding generator, Six rod carousal and mud pump. |
| Rod changer | Manually operated rod changer to handle single rods with 1000 kgs. capacity pull up winch to carry drill rods, casings and hammer tools. |
| Mast raising cylinder | Bore: 125mm2 | Stroke: 800mm | Quantity: 2 No's |
| Air compressor | 1500 cfm – 400 psi / 1200 cfm – 330 psi or 1100 cfm – 300psi / As per customer request |
| Air line lubricator | 18 liters |
| MUD PUMP | Capacity: 7½" x 10" | Linear size: 7½" | Stroke : 10" | Flow : 2494 lpm | Pressure : 20.74 kg/cm2 |
KLR Hammers are the most sustainable Hammers and they give a very long life. The Hammers are ISO 9001: 2015 Certified.
Technical Specifications
| Hammer Name | Bits Suitable for the Hammer |
|---|---|
| 3" Cheetha | Bits Cheetha 3.0"/3.5"/4.0"/4.5" |
| 3.5 DHD-3.5 | Bits DHD-3.5(Convex) 3.5"/105mm |
| 4.5" HP | Bits Panther 4"/ 4.5"/ 5"/5.5"/ 6"/6.5"/7" |
| 4.5" Super-5 | Truck Engine |
| D-40 | Bits D-40(SD-4) 4.2"/4.5"/ 5"/5.5"/ 6"/6.5"/7" |
| DHD-340 | Bits DHD-340 4"/4.5"/ 5"/5.5"/ 6" |
| 4" SPEED | Bits Mission-40 4.5"/5.0"/5.5" |
| QL-40 | Bits QL-40 4"/4.5" |
| D-45 | Bits D-45 4.75"/ 5"/5.5"/ 5.75"/6"/6.5"/7" |
| D-50 | Bits D-50 5"/5.5"/ 6.0" |
| D-55 | Bits D-55 5"/5.875"/6.67"/6.5"/7.4"/7.875" |
| Tiger-2 | Bits Mega/SD-6 6.0"/6.5"/7.0"/7.5"/8.0"/8.5"//9.0"(OB) |
| DHD-360 | Bits DHD-360 6.0"/6.5"/7.0"/7.5"/8.0"/8.5"//9.0"(OB) |
| D-62 | D-62 6.0"/6.5"/8.0" |
| 6" SPEED | Bits Digger 6.0"/6.5"/7.0"/7.5"/8.0"/8.5"/8.5"(OB)/9.0"(OB)/10.0"(OB)/10.5.0"(OB)/11.0"(OB)/12.0"(OB) |
| 6" Digger | Bits Digger 6.0"/6.5"/7.0"/7.5"/8.0"/8.5"/8.5"(OB)/9.0"(OB)/10.0"(OB)/10.5.0"(OB)/11.0"(OB)/12.0"(OB) |
| 6.5" Digger | Bits Digger 6.5"/7.0"/7.5"/8.0"/8.5"/8.5"(OB)/9.0"(OB)/10.0"(OB)/10.5.0"(OB)/11.0"(OB)/12.0"(OB) |
| 6.5" SPEED | Bits Digger 6.5"/7.0"/7.5"/8.0"/8.5"/8.5"(OB)/9.0"(OB)/10.0"(OB)/10.5.0"(OB)/11.0"(OB)/12.0"(OB) |
| 7" TURBO | Bits Rajkot 7.0"/7.5"/8.0"(RD)/8"(JRK)/8.5"(OB)/9.0"/10.0" |
| 8" D-17 | Bits D-17 8.0"/8.5"/9.0"/10.0"/10.5"/11.0"/12.0"(OB)/13.0" |
| LR8_Pin | Bits SD-8 8.0"/8.5"/9.0"/9.5"/10.0"/10.5"/11.0"/11.5"/12.0" |
| DHD-380 | Bits DHD-380 8.0"/8.5"/8.714"/9.0"/9.5"/10.0"/10.5"/11.0"/11.5"/12.0"/12.5"/14.0" |
| 8" MACH-88 | Bits Mach - 88 9" |
| 8" SPEED LR | Bits SD-8 8.0"/8.5"/9.0"/9.5"/10.0"/10.5"/11.0"/11.5"/12.0" |
| 8" Gladiator | Bits Gladiator 7.875"/8.0"/8.5"/9.0"/9.5"/10.0"/10.5"/11.0"/11.5"/12.0" |
| 8" SPEED-G | Bits Gladiator 7.875"/8.0"/8.5"/9.0"/9.5"/10.0"/10.5"/11.0"/11.5"/12.0" |
| D-100 | Bits D-100 10.0"/10.5"/12"/14.0"/16.0" |
| SD-10 | Bits SD-10 9 7/8"/11"/11 7/8"/12"/12 7/8" |
| D-120 | D-120 15"/18"/20" |
Products Range
| Model | Bore Size Minimum | Bore Size Maximum | Maximum Pressure bar | Fetures |
|---|---|---|---|---|
| KHT | 40 | 300 | 160 | Confirms to ISO Standards | Choice of Different Mounting Styles | Imported Seals | Compact Tie-Rod Design |
| KHR | 40 | 300 | 160 | Confirms to ISO Standards | Choice of Different Mounting Styles | Imported Seals | Mill Duty Design |
| KHH | 50 | 300 | 250 | Confirms to ISO Standards | Choice of Different Mounting Styles | Imported Seals | Energizer or Chevron Packing Type | Rod Seals-Poly Urethane 'U' type or PTFE-Bronze Ring With O-Ring Energizer Or Chevron Packing Type |
| KHG | 40 | 200 | 200 | For Mobile Application | Flush Design With Threaded Rod | Gland and Welded Cap | Port Piping As per Customer Need | Easy to Service |
| Special | 40 | 800 | 400 | For Mobile Application | Flush Design With Threaded Rod | Gland and Welded Cap | Port Piping As per Customer Need | Easy to Service |
