Our Products
Valves & Valve Fittings
2 Products availableCooling Tower, Heat Exchanger & Parts
2 Products availableElectronic Components
2 Products availableConveyors
2 Products availableExhaust Systems
1 Products availableOur Complete range of products are Nex Flow Mini-High Force Air jet, Ring Blade Air Wipe Blowoff Systems, Manifold Mounted Systems, X Stream Hand Vacuum Gun and ION BLASTER BEAM.
nex flow air amplifiers are simple, inexpensive devices with virtually no maintenance that can convey fumes, smoke, lightweight materials and move a high volume of air for cooling, blowoff and drying applications. They use the "coanda effect" which entrains a large amount of surrounding air using only a small amount of compressed air. The effect is an amplification of up to 17 times the airflow or more (depending on the size) with reduced noise levels.
applications
superior designed air jets reduce compressed air consumption and noise levels while maintaining laminar flow for strong blowoff. Air jets entrain large volumes of surrounding air through the jet (similar to air amplifiers) and are more efficient than air nozzles. They cover a larger blowoff target than a nozzle and ideal especially for part ejection.
all nex flow air jets meet osha standard cfr 1910.242(b) for dead end pressure. Noise levels are dramatically reduced with air jets in addition to lower energy use.
applications
The Nex Flow's Ring Blade Air Wipe produces an even 360 degree blow off around the part, light in weight and compact. Easy to install and maintain and allows removal of a continuous piece. Reduces compressed air use for energy savings plus lower noise levels. Maintenance free with output easily controlled.
Designed as two pieces hinged together to open and close around the part. Instant on-off with no moving parts The 360 Degree Air Wipe System produces a "laminar" flow of air along its 360 angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Air Wipe System to produce an output flow up to 30 times
Available in 10 standard (inside) diameters AND in 3 versions:Special diameters for the Air Wipe Blow-Off System - X-Stream Ring Blade are available on special request from Nex Flow.
Air Wipe Blow-Off System - X-Stream Ring Blade comes with a standard .002" outlet gap which will work for 90% of all applications encountered.
If greater force is required, a second .002" (.05mm) shim may be installed to open the gap for greater flow. Materials of construction anodized aluminum or 316L stainless steel.
APPLICATIONS
|
Size (Internal Diameter) Inches (mm) |
Air Consumption per unit with Standard 0.002" (0.05mm) gap SCFM (SLPM) |
Air Consumption per unit with 0.004" (0.10mm) gap (shim added) SCFM (SLPM) |
Sound Level @3FT dbA |
| 1/2" (12.7mm) | 14 (396) | 28 (793) | 75 |
| 1" (25.4mm) | 19 (538) | 38 (1076) | 76 |
| 2" (50.8mm) | 30 (850) | 60 (1699) | 77 |
| 3" (76mm) | 40 (1132) | 80 (2265) | 79 |
| 4" (102mm) | 51 (1444) | 102 (2888) | 81 |
| 5" (127mm) | 60 (1700) | 120 (3398) | 82 |
| 6" (152mm) | 71 (2010) | 142 (4021) | 84 |
| 7" (178mm) | 80 (2266) | 160 (4532) | 85 |
| 9" (229mm) | 102 (2880) | 204 (5760) | 87 |
| 11" (279mm) | 123 (3480) | 246 (6960) | 89 |
Manifold Systems combine the Nex Flow Air Edgers and Air Nozzles in combinations of two, four and 6 items for blow off an cooling applications where air knives may not be applicable and where a set length of blow-off is required. Provided with any of the air nozzles and in particular theAir Edger flat jet nozzle to provide a more power air knife effect when regular air knives are not powerful enough.
Available in aluminum and stainless steel.
APPLICATIONS
Frigid-X Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.
It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.
Produces cold air at approximately 50 F (28 C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.
Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.
APPLICATIONS
When lubrication is required as well as cooling, lubricating mist can be reduced and cooling enhanced.Heavy coolant can be messy, costly and must be carefully maintained. Dry machining is not always possible due to the need for lubrication or additional cooling that cold air alone cannot provide.
The unique patent pending low costFrigid-XSub-Zero VortexTool Cooling Mist Systemis ideal for these applications. The unit is comprised of a coolant/lubrication suction system which draws any water based liquid into a specially designed delivery system. This cools the liquid to deliver a very cold fluid "mist" at around 40 degrees F (5 degrees C). This cooling allows for as much as 20% less coolant needed, faster production rates and improved quality. An Adjusting screw controls the amount of mist required. Simple operation, no moving parts except for the adjusting screw means long life, low cost operation and zero maintenance.
APPLICATIONS
Blow dirt, chip and debris out of deep blind holes in one easy step. Can clean holes up to 1 inch diameter and 20 inches deep.! Blow guns alone can create potentially hazardous flying debris. All the debris is contained within the unit and passed into a reusable collection bag, protecting the operator.
The Blind Hole Cleaning System consists of a Blind Hole Gun assembly, an adaptor for the diameter of the hole and the nozzle for the particular depth range of hole. The Blind Hole Cleaning Kit includes all hole diameter adaptors, all nozzles as well as a water removal filter with auto drain.
The Model 40002FMS STREAM VAC is a versatile and affordable compact air cleaning system is ideal for the removal of fumes, dust and other air pollution from work stations without the need for heavy and bulky machinery. The Nex Flow Stream Vac is an in line air conveyor that when hooked up to a 2" hose up to 25 feet (8 meters) and connected to a compressed air line, it will remove up to several hundred cubic feet of air while using only a minimal amount of compressed air, taking with it welding fumes, soldering fumes, particulate from local grinding operations, smoke and particulate from almost any "spot" application.
FEATURES
Manufactured in 316L Stainless Steel: The Reversible Drum Angel/ Drum Pump is a maintenance free system to recover spilled liquids, coolant, sludge, tramp oil, wastewater and other liquids using only compressed air. The compressed air system attaches easily to any closed head of a drum (30 or 55 US gallon, or 45 Imperial gallon or 205 litre drum) The reversible feature allows you to fill or empty the drum in under two minutes with the simple turn of a knob. Using no electricity, these system last and last, unlike many electrical units that wear out quickly in harsh industrial.
The Nex Flow Ring Vac Air Conveyor is available in both ANODIZED Aluminum, Heavy Duty HARD Anodized or ALL STAINLESS STEEL. Simply clamp a standard hose size to each end of the Ring-Vac to create this high energy conveying system. No moving parts for maintenance free operation with capacity and flow controlled with a pressure regulator.
Known as Hopper Loaders or Venturi Loaders, originally designed to eliminate manual bending and lifting. Conveying rate depends on density of material ( Lbs / cubic foot ), horizontal run, vertical lift. These vacuum conveyors provide a simple, low cost solution compared to other pneumatic conveying systems
APPLICATIONS
The X-Stream Hand Vac is the low cost solution to a variety of industrial housekeeping applications. It is a blow gun, a vacuum gun, a collection system and a transfer system in one simple package. The X-Stream Hand Vac is lightweight die cast aluminum and uses less air than a normal blow gun. It draws a vacuum at one end to produce a high vacuum for collection or transfer of materials. It is easily converted from a blow gun into a vacuum gun and back again. It can also be used to transfer material over a long distance using a vacuum hose which can be supplied. In vacuum mode, it can be used to vacuum up debris if more appropriate than blowing air, and debris can be collected in an available reusable vacuum bag.
APPLICATIONS
The Flex.US Ultrasonic Leak Detector is a hand held, high quality compressed air leak detection system that has all the features necessary for flexible use in finding costly air leaks.
The FLEX.US ultrasonic leak detector kit comes with the FLEX.US unit, carrying case, and manual and utilizestwo AA alkaline batteries(included). The FLEX.US is a complete kit the high quality flexible sensor is mounted on the end of a flexible steel pipe so the ultrasonic sound can access hard to reach areas. The unit converts the ultrasonic noise of a leak into a sound humans can hear (hissing sound) and not just some beeping sound or LED display that may not distinguish a leak sound fromother phenomenon.
The headset has excellent noise attenuation for use in the noisiest of environments.
A rugged carrying case protects your FLEX.US when not in use.
The FLEX.US is a solid tool built to last, it is easy to use and will providemany years of service.
The FLEX.US ultrasonic leak detector kit comes with the FLEX.US unit and manual and utilizes two AA alkaline batteries (included).
The FLEX.US is a complete kit the high quality flexible sensor is mounted on the end of a flexible steel pipe so the ultrasonic sound can access hard to reach areas. The unit converts the ultrasonic noise of a leak into a sound humans can hear (hissing sound) and not just some beeping sound or LED display that may not distinguish a leak sound from other phenomenon.
The headset has excellent noise attenuation for use in the noisiest of environments.
A rugged carrying case protects your FLEX.US when not in use.
The FLEX.US is a solid tool built to last, it is easy to use and will provide many years of service.
Where air is required to affect static removal at a distance and compressed air is not available, the Haug Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar. These units are easy to mount and simple to operate with an adjustable fan. The bar is located outside the blower for easy maintenance and cleaning. Three different sizes are available small, medium and large lengths.
NOTE: If strong blow-off force is required and compressed air cannot be utilized, Nex Flow Air Products Corp. partners with companies that can supply regenerative blower systems.
Special Notes:Haug static bars all come with a patented connector to assure safety in operation and maintenance. Field repairable, it prevents a connection if the static bar is removed or attached while power is still on at the power supply.
Cable is FULLY SHIELDED unlike some manufacturers which claim shielding which may only be partial. This results in much longer life for Haug products.
REPAIRABLE POWER SUPPLIES almost unheard of in the industry, Haug power supplies are repairable and come with a 2 year warranty.
APPLICATIONS
The Nex FlowIon Blaster Beamneutralizes static electricity and can remove static free dust up to 15 feet (4.6 m) away with no moving parts. It's compact design allows it to be used in hard to reach areas or confined spaces. The air volume and velocity are infinitely adjustable over a wide range using a pressure regulator to address any application from light to heavy duty. The use of an"air amplifier"(Model AM40) maximizes ionized airflow with large volume entrained while minimizing the use of compressed air.
In most applications only 10 psig (0.7 bar) is required to operate effectively. The Ionizing Point is a powerful ionizer which remains effective because the air exit "plastic PET head" of the unit prevents weakening if ions which metal attachments may do. This can make theIon Blaster Beamfar more effective than systems using metal.
FEATURESCertification: North American Power Supplies certified to UL and CSA standards and Spot Ionizer used with the Ion Blaster beam is included with the certification. European Power Supplies CE approved and Spot Ionizer used with the Ion Blaster Beam is included with the certification. Stainless steel emitters on the ionizer.
Electrical:For use with 7 kV rms, 5 milliamperes (max) power supply which will last much longer than 5 kv power supplies.
Electrical Hazard:Shockless (less or eualt to 5mA)
Maximum Ambient Temperature:122 degrees F or 50 degrees C.
The HAUGRNionizing bars is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively, even at high operating speeds.
The coaxial high-voltage plug-and-socket connection of the HAUG systemX-2000offers a unique advantage in that the gastight high-voltage plug can be connected to the HAUG power pack easily and without tools. The flexible, coaxially shielded cable connects the ionizing unit with the voltage supply.
The round construction of the RN ionizing bars permits the exact axial adjustment in the direction of travel of the material. The ionizing bars is safe to touch. Special wear-resistant electrodes guarantee long service life.
APPLICATIONS
TheRing Ionizer Ionizing Nozzlesare a highly effective the discharging and cleaning of surfacesin particular of non-conductivematerials. The Nozzles can also be mounted to a handgun if they need to be converted to manual use.
TheOne-Point-Ionizer OPIwas developed for the neutralization of the smallest of parts. Emitting positive and negative ions, this unit reliably neutralizes spot charges.
This ionizer is perfectly suited for mounting in places where there is little room. The plug of the electrode must simply be connected to the high voltage transformer (power pack) and the unit can be quickly set into operation without tools.
The One-Point-IonizerOPIhas proven its value repeatedly in daily use, e.g. in the medical industry. TheOPIcan also be equipped with compressed air(Mini-Jet Ionizer).
NOTE:The pin carries high voltage and must not be touched while in operation.
The LG is an indispensable production aid for film processing, electronic manufacture, and precision mechanics. This device has also proven to be very reliable and efficient for the manufacture of measuring devices and control gears, for pcb assembly as well as for screen, pad printing and other printing procedures.
Electronic Thermostat ELC (Electronic Control Digital Thermostat) is a way for precise control of one or two Nex Flow Frigid-X panel coolers.
Supply Voltage: AC120-240V (24V on request)
Standard unit comes with one solenoid valve, but it can operate two units and also complete additional tasks
The"Liquid Super Separator" is a new concept of a pneumatic mist remover without filter element. The "Element Free Pneumatic Water Separator" uses a special centrifugal technique with "radial multi-nozzles" that is world patent pending and makes it possible to reject liquid mist (water and oil) to 99.9%! This pneumatic mist separator is virtually maintenance free, as there is no need to replace any filter element. A standard traditional filter with an element and automatic drain may be placed downstream to control micron size but the high liquid and mist removal of the separator will keep it clean and it may not require element replacement for an extended period of time. Maintains extremely low pressure drop
FEATURES
The unique Nex Flow RIGID FLEX Hose is an all stainless steel hose that does not break after a few bends like competitive rubber hoses with simple copper inserts. It is resistant to creep and crimping. Its all stainless construction allows is use in any difficult environment.
The Nex Flow RIGID FLEX Hose is used to flex, direct and then hold in placeair nozzles, air jetsand other small blow off products TM TM such as our Model 40001adjustable air amplifierand 3"X-Stream Air Blade Air Knife. The RIGID FLEX Hose can also be used with liquid spray jets.
The rigid flex hose is available in three different sizes 6" (152 mm), 12" (304 mm) and 18"(457 mm) and in two configurations 1/4? male NPT welded end connection both ends or 1/4" male NPT welded connection one end and female NPT welded connection other end.
| PART NO. | DESCRIPTION |
|---|---|
| 6RF connections | 6" overall length - 1/4" NPT male to 1/4" NPT male |
| 6RF -MF connections | 6" overall length - 1/4" NPT male to 1/4" NPT female |
| 12RF connections | 12" overall length - 1/4" NPT male to 1/4" NPT male |
| 12RF -MF connections | 12" overall length - 1/4" NPT male to 1/4" NPT female |
| 18RF connections | 18" overall length - 1/4" NPT male to 1/4" NPT male |
| 18RF -MF connections | 18" overall length - 1/4" NPT male to 1/4" NPT female |
Cabinet Panel CoolerAccessories are available with a standard two-way normally closed solenoid valve and thermostat kit Model 90015 (120V) or Model 90016 (240V). This limits the flow of air only when required. The thermostat is factory set at 95F (35C) and will normally hold +/- 2F (1C) inside the enclosure. It is rated 24V-240V, 50/60Hz. Ul recognized and CSA approved.
Thermostat And Solenoid Valve Kit
This kit comes complete with a solenoid valve, thermostat, and a resistor. The resistor is included should you encounter rapid temperature fluctuations in the control panel causing the solenoid to cycle on and off to quickly (chattering). The resistor is installed (if needed) across the leads of the thermostat and prevents chattering by dampening the thermo switch sensitivity.
NEX FLOW MOUNTING SYSTEM FOR AIR BLADE AIR KNIVES & AMPLIFIERS Flexible and Durable
Mounting Systems for air knives and amplifiers provide a convenient and flexible way to utilize the products for blow-off and cooling applications. All Mounting Systems are made of powder coated steel. One knob controls the infinite flexibility of the system and secures it in place after the air knife or amplifier is properly positioned. Optional magnetic base can secure it to a magnet accepting platform. Rugged and secure positioning.
FEATURES
The Nex Flow's Ring Blade Air Wipe produces an even 360 degree blow off around the part, light in weight and compact. Easy to install and maintain and allows removal of a continuous piece. Reduces compressed air use for energy savings plus lower noise levels. Maintenance free with output easily controlled.
Designed as two pieces hinged together to open and close around the part. Instant on-off with no moving parts The 360 Degree Air Wipe System produces a "laminar" flow of air along its 360 angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Air Wipe System to produce an output flow up to 30 times
Available in 10 standard (inside) diameters AND in 3 versions:Special diameters for the Air Wipe Blow-Off System - X-Stream Ring Blade are available on special request from Nex Flow.
Air Wipe Blow-Off System - X-Stream Ring Blade comes with a standard .002" outlet gap which will work for 90% of all applications encountered.
If greater force is required, a second .002" (.05mm) shim may be installed to open the gap for greater flow. Materials of construction anodized aluminum or 316L stainless steel.
APPLICATIONS
We are the main supplier of this product.
pneumatic presses used in all types of industrial settings. Kjn enterprises manufacturing pneumatic presses for more than 25 years. Pneumatic presses common applications are: compacting, blanking, extruding, marking, cupping, peening, deep drawing, flaring, punching, rivetting, notching, cutting etc., india.
pneumatic pressing tonnage:50 kg to 5 tonnes
type of frame :c - frame, single pillar, 2 - pillar, 4 - pillar
pneumatic conventional press, tandem press, impact press and toggle press. Our base plates are manufactured from prime-quality ms with the working surface ground and hard chrome plated for long rust-free life.
base plate :
our base plates are manufactured from prime-quality ms with the working surface ground and hard chrome plated for long rust-free life. Various base plate construction options are available. Please refer our questionnaire for the same.
controls :
pneumatic presses can be operated in many ways. It can be completely plc controlled or can be operated by a simple hand lever valve. Please refer our questionnaire for the various control options available.
additional features :
many additional features can be provided on the pneumatic presses for ease of operation, safety of the operator and better finish of the component being pneumatic presses. The various features that can be provided are listed in the questionnaire. Please refer our questionnaire for further information.
Pneumatic Rotary Valves are a type of directional control valves which are used for control of pneumatic cylinders or as part of large pneumatic circuit, They are largely used for panel mounting applications.
Quick Exhaust valve is used to allow direct exhaust by unrestricted flow to atmosphere from a pressurized system. They are used for increasing piston speed of pneumatic cylinders upto 3 times by allowing quick exhaust of the back pressure on the piston when mounted directly on the exhaust port. Another example of their use is for rapid closure of the pneumatic brake of a power press.
Andheri East, Mumbai, Maharashtra 
