Our Products
Valves & Valve Fittings
2 Products availableCooling Tower, Heat Exchanger & Parts
2 Products availableElectronic Components
2 Products availableConveyors
2 Products availableExhaust Systems
1 Products availableWe offer a complete product range of AIR MAG AIR NOZZLES, Air Knives, Air EdgerTM Flat Jet Nozzles, Ion Air Knife and Air Blade Knife
The Nex FlowAir MagAir Nozzle is an engineered nozzle with a unique "patent pending design" to assist in focusing the compressed air from the supply line and entrained air from the surroundings to a more sharp laminar flow of air with the highest force per SCFM on the market. This both reduces compressed air energy use and noise levels as compared to open jets and pipe. Even replacing competitive air nozzles can provide significant cost savings in energy and noise levels. The nozzle is of rugged, cast zinc, single piece design ideal for harsh environments
Air Knife Systems utilize compressed air for industrial blow off and cooling applications. Used extensively for replacing rows of nozzles or jets or drilled pipe to reduce energy. The curtain like airflow of the Air Knife is an efficient way to dry, clean, and cool.
Applications includes the removal of excess oils, liquids, and dust. The Air Knife is used in printing, labeling and packaging, and used in part or component cooling, Industries include: Converting and Packaging, Films and Laminating, Form and Fill, Sheet and Web Materials of all types from film to metals, Bag opening/fill operations, Conveying or hold down, Food Processing, Paint preparation and drying.
APPLICATIONSModel 47011 Air Edger Flat Jetair nozzle is designed to provide a powerful stream of high velocity laminar flow and high force for blow off and cooling where air knives may not be enough.
When bench tested against several other flat jets, even those with special designed holes or shims, theAir Edger Flat Jetoutperformed them all despite whatever claims others may make. Air consumption and noise levels are minimized with its special design and configuration.
TheNex Flow Air EdgerFlat Jet is available with various size "gaps" all set by a flat shim. Three standard shim sizes are available - .004" (.10 mm), .008" (.2mm) and .020" (.51 mm). One, two or more shims can be "stacked" for a larger gap and greater force.
APPLICATIONSA Low Cost but powerful static eliminator that rapidly removes static charge and cleans.
The Standard Air Blade Ionizer combines the superior designedStandard Air BladeAir Knife the qualityHaug static bars the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds. The standard Air-Blade Air Knife uses slightly more compressed air than theSilent X-Stream Air Bladeand has a higher sound level but still produces a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.
Static Elimination Air-Blade Ionizers are supplied in several versions.
Standard Air-Blade Ionizerwith a standard Nex Flow Air Blade Air Knife and standard strength Model RN Haug static bar. These units are ideal for most static removal applications.
X-Stream Air-Blade Ionizerwith the extra quiet Nex Flow X-Stream Air Blade Air Knife and standard Strength Model RN Haug static bar. These units apply to most static removal applications where noise levels must be extremely low.
Super Triple Standard Air-Blade Ionizerwith a standard Nex Flow Air Blade Air Knife and a triple strength Model VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required such as very high speed applications or materials that can produce very high charges such as Mylar or tissue.
Super Triple X-Stream Air-Blade Ionizerwith extra quiet Nex Flow X-Stream Air Blade Air Knife and a triple strength Mode VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required and where noise issues are important.Special materials and static bars can be utilized for unique applications. If greater blow-off force is required, shims may be added to the Air Blade Ionizer for higher capacities.
The Nex FlowAir MagAir Nozzle is an engineered nozzle with a unique "patent pending design" to assist in focusing the compressed air from the supply line and entrained air from the surroundings to a more sharp laminar flow of air with the highest force per SCFM on the market. This both reduces compressed air energy use and noise levels as compared to open jets and pipe. Even replacing competitive air nozzles can provide significant cost savings in energy and noise levels. The nozzle is of rugged, cast zinc, single piece design ideal for harsh environments
APPLICATIONS
Air Mag™ Nozzle - 1/4" - Model 47004AMF | ||||||
---|---|---|---|---|---|---|
Inlet Pressure PSIG (Bar) |
20 (1.4) |
40 (2.8) |
60 (4.1) |
80 (5.5) |
100 (6.9) |
120 (8.3) |
Force LBS (Grams) |
0.247 (112) |
0.474 (215) |
0.705 (320) |
0.937 (425) |
1.172 (532) |
1.143 (519) |
Air Consumption SCFM (SLPM) |
5.5 (156) |
9.0 (255) |
12.0 (340) |
15.5 (439) |
19.7 (558) |
23.4 (663) |