The Frigid-X series Cabinet Enclosure Cooler for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steelvortex tubeto create cold air from ordinary compressed air.

Our Cabinet Enclosure Coolers are compact and can be installed in minutes through a standard electrical knockout.

Nex Flow Offers 4 Types of UL Listed NEMA Rated Electrical Panel Coolers:

Frigid-X Cabinet Panel Coolers NEMA Type 12 (IP-52)For Electronic Control Panels for General use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.

Frigid-X Cabinet Panel Coolers NEMA Type 3R (IP-14)For Electronic Control Panels for Outdoor Use. Stainless steel to hold up to rain, snow, humidity and general outdoor use.

Frigid-X Panel Coolers NEMA Type 4-4X (IP-66)For Electronic Control Panels - splash resistant, for use in washdown environments as well as outdoor use. Unique patented design*for secure water tight protection. Stainless steel for food service and corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use.

Frigid-X Panel Coolers NEMA Type 4-4X-316L (IP-66) The Patented* NEMA TYPE 4-4X-316L (IP 66) Frigid-X Panel Cooler are constructed of316L Stainless Steel. Dust, oil-tight, spray resistant and used in environments where there are liquids and for food service and corrosive environments.

Features

The Silent X-Stream Frigid-X Panel Cooler series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Utilizing a hot and cold end muffling kit the unit is made extra quiet to under 64 dBA depending on capacity. The hot end muffler also acts a "heat guard" - you can actually wrap your hand around it without feeling much heat. The hot air is exhausted safely underneath the hot end muffler.

The Silent X-Stream Frigid-X Panel Cooler series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.

Features

The Frigid-X Adjustable Spot Cooler is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end.

Temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30F to room temperature and can be easily set with a thermometer.

TheAdjustable Spot Cooler comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts).

All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-X Adjustable Spot Cooler is Constantly Quieter Than Competition! Sub-zero cold air temperatures from an ordinary compressed air supply forspot air cooler applications where adjustability is important!

Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the adjustable spot cooler.

Units are available with either a single point hose kit for small surface areas, Adjustable Spot Cooler or a dual point hose kit when heat is generated over a larger surface area.

Adjustable spot cooler can produce a wide range of airflow and temperature by adjusting the knob at the hot end and changing the various generators supplied.

The generators control the air consumption and are easily interchangeable.

Our Adjustable spot cooler has a 25 SCFM (708 SLPM) generator installed that will produce up to 1, 800 Btu/hr. of cooling. If less is required, the 15 SCFM (425 SLPM) generator can deliver 1, 100 Btu/hr.

If more cooling is needed Nex Flow can supply you with the 30 SCFM ( 850 SLPM) generator for up to 2, 100 Btu/hr. of cooling.

APPLICATIONS ADVANTAGES

The Frigid-X series Cabinet Enclosure Cooler for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steelvortex tubeto create cold air from ordinary compressed air.

Our Cabinet Enclosure Coolers are compact and can be installed in minutes through a standard electrical knockout.

Nex Flow Offers 4 Types of UL Listed NEMA Rated Electrical Panel Coolers:

Frigid-X Cabinet Panel Coolers NEMA Type 12 (IP-52)For Electronic Control Panels for General use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.

Frigid-X Cabinet Panel Coolers NEMA Type 3R (IP-14)For Electronic Control Panels for Outdoor Use. Stainless steel to hold up to rain, snow, humidity and general outdoor use.

Frigid-X Panel Coolers NEMA Type 4-4X (IP-66)For Electronic Control Panels - splash resistant, for use in washdown environments as well as outdoor use. Unique patented design*for secure water tight protection. Stainless steel for food service and corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use.

Frigid-X Panel Coolers NEMA Type 4-4X-316L (IP-66) The Patented* NEMA TYPE 4-4X-316L (IP 66) Frigid-X Panel Cooler are constructed of316L Stainless Steel. Dust, oil-tight, spray resistant and used in environments where there are liquids and for food service and corrosive environments.

Features

The Silent X-Stream Frigid-X Panel Cooler series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Utilizing a hot and cold end muffling kit the unit is made extra quiet to under 64 dBA depending on capacity. The hot end muffler also acts a "heat guard" - you can actually wrap your hand around it without feeling much heat. The hot air is exhausted safely underneath the hot end muffler.

The Silent X-Stream Frigid-X Panel Cooler series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.

Features

The Frigid-X Adjustable Spot Cooler is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end.

Temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30F to room temperature and can be easily set with a thermometer.

TheAdjustable Spot Cooler comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts).

All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-X Adjustable Spot Cooler is Constantly Quieter Than Competition! Sub-zero cold air temperatures from an ordinary compressed air supply forspot air cooler applications where adjustability is important!

Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the adjustable spot cooler.

Units are available with either a single point hose kit for small surface areas, Adjustable Spot Cooler or a dual point hose kit when heat is generated over a larger surface area.

Adjustable spot cooler can produce a wide range of airflow and temperature by adjusting the knob at the hot end and changing the various generators supplied.

The generators control the air consumption and are easily interchangeable.

Our Adjustable spot cooler has a 25 SCFM (708 SLPM) generator installed that will produce up to 1, 800 Btu/hr. of cooling. If less is required, the 15 SCFM (425 SLPM) generator can deliver 1, 100 Btu/hr.

If more cooling is needed Nex Flow can supply you with the 30 SCFM ( 850 SLPM) generator for up to 2, 100 Btu/hr. of cooling.

APPLICATIONS ADVANTAGES