Our Products #11316971

• The system consists of two portals. On the right is the automatic car wash and on the left is the drying unit, the under chassis wash system is fitted on the wash pad Modular Form 
• The 3 modules - Car Wash, Drying Unit & Under Chassis wash can be supplied individually or as a complete system 

Product Details:

• Multi Programme System
• Adjustable Under Chassis Wash System
• Electronic Pressure Sensing Unit 
• Safe Touch Free Drying Unit 
• The system can wash & dry 80 or 140 cars per 8 hrs without extra cost 

Additional Details:

• The machine is rigidly constructed from high quality materials, fully treated for corrosion prevention. The appearance is enhanced by PVC moulded coverings finished in soft colours. The new generation KWE Car Wash is automation with programmable logic controller (PLC) with built-in-memory. It controls all machine movements with absolute precision and safety. In case of any fault the machine it can easily be read and diagnosed by LED display on the PLC. The KWE Car Wash is a self contained 3 brush, roll over type of machine. In the presoak cycle the vehicle is totally covered with soap flakes which are rinsed of in the return traverse after which the brush wash is started. In the first pass the vehicle is given a thorough cleaning with shampoo and gentle brushing action and in the return traverse liquid wax in predetermined quantity is sprayed over the vehicle surface. The horizontal brush keeps to the contour of the car body by electronic pressure sensing and its up/down movement controlled by a geared motor system. Accurate ampere sensing by use of Variable Frequency Drive provided constant speed and pressure control of horizontal brush for safe and smooth cleaning operation by UP and Down movement of brush, thus maximizing the cleaning process. 
• Provision is given in the machine to adjust the pressure setting of the horizontal brush to "Mild", "Medium" and "Hard", To suit Indian Conditions it also incorporates a luggage carrier avoidance circuit. The vertical brushes wash the sides of the vehicle automatically adjusting to varying vehicle widths. The movement of the vertical Units, makes the vertical brushes exert equal pressure on the vehicle side for excellent Cleaning of the Sides. The brushes are made of polyethylene material bristles mounted on PVC pads of 305mm length for easy replaceability. 2 to 3 electronic metering pumps monitor the correct ratio of mix of detergent/wax. 

• A stand-alone type of machine specially designed and manufactured to biophysically treat wash water from car/bus wash activity either manually or by automatic car/bus wash system.

Advantages: 

• No recurring consumption of chemical products. 
•  No carcinogenic sludge is produced (produced in the chemical-physical type purification system).
• Since no chemicals are used the problem of maintaining correct chemical balances, checking their levels and the cost of chemicals are avoided. 
• Zero discharge as water is recycled. 
• The KWE policy is one of constant product development.

 The company, therefore, reserves the right to amend the design of equipment whenever necessary without notice. 

Product Details:

• The system has been especially designed and manufactured to biophysically (without use of chemicals) treat waste wash water coming from car/bus washing activity being carried out either manually / or by Automatic Vehicle Washing Machine. 
• In order to preserve the quality of the water sent back for reuse, air is blown into the storage tank of water to be treated and that of treated water - to prevent setting in of anaerobic process that creates degradation phenomena with the formation of bad and unpleasant odors. (This will depend on the organic matter found in the Influent and may not be essentially required). 
• The quartzite filtering column and following activated carbon adsorption columns complete the purification process of the wash water. The quartzite-filtering phase removes any sedimentable or suspended matters from the water that escaped the previous treatment phases. The activated carbon adsorption section eliminates the residual organic matters such as oils, detergents and solvents. The plant is not designed to deal with substantial quantities of free oil. The water, following the aforesaid biophysical treatment, is suitable to be sent back for reuse for washing or can be thrown in drains as it will meet the limits specified by local pollution control committee. 

The treatment cycle consists of: 

• Sedimentation
• Oil Separation
•  Biological  oxidation (wherever required) 
• Treated Water Tank
•  Aeration
•  Recycling the treated water. 

• The Monarch is a self-contained, 3 brush roll over gantry-type machine giving a full 2 pass wash to the vehicle. In the first pass the vehicle is given a thorough cleaning with shampoo and gentle brushing action and rinsed with water in the 2nd pass. The horizontal brush follows the contour of the vehicle surface by electronic pressure sensing. The pressure of the horizontal brush is adjustable as Mild, Medium' and 'Hard'. To suit Indian conditions it also incorporates a luggage carrier avoidance circuit, anti-trap, and back-track sensing systems. The ventricle brushes wash the sides of the vehicle automatically adjusting to varying vehicle widths. 
• The new generation KWE-Monarch is automated with a Programmable Logic Controller (PLC) with EEPROM memory. It controls all machine movements with absolute precision and safety. Faults can be east), read and diagnosed by the LED display on PLC

Product Details:-

• A stand alone equipment 
• Assembled on a channel frame 
• Minimal civil work
• Can use recycled water. No fresh water required. 
• Normally takes 15 seconds to clean the under body.
• Can be fitted anywhere-on existing ramps, roofs etc. 

Fixed Type

• Assembled on a channel frame and requires minimal civil work 
• An assembly of 80 nozzles spread to cover the whole under side of big car 
• Provision to work only 60 nozzles. by means of a 90 degree ball valve to wash a smaller car 
• Gives a fierce spray of water by fan / jet shaped nozzles fitted on series of galvanized pipes to cover the entire under chassis. 
• The water pressure is assisted by air 
• Provision to select time for operation is given in control panel (0-6 minutes) 
• Auto / manual operation can be selected by selector switch 

• The system consists of two portals. On the right is the automatic car wash and on the left is the drying unit, the under chassis wash system is fitted on the wash pad Modular Form 
• The 3 modules - Car Wash, Drying Unit & Under Chassis wash can be supplied individually or as a complete system 

Product Details:

• Multi Programme System
• Adjustable Under Chassis Wash System
• Electronic Pressure Sensing Unit 
• Safe Touch Free Drying Unit 
• The system can wash & dry 80 or 140 cars per 8 hrs without extra cost 

Additional Details:

• The machine is rigidly constructed from high quality materials, fully treated for corrosion prevention. The appearance is enhanced by PVC moulded coverings finished in soft colours. The new generation KWE Car Wash is automation with programmable logic controller (PLC) with built-in-memory. It controls all machine movements with absolute precision and safety. In case of any fault the machine it can easily be read and diagnosed by LED display on the PLC. The KWE Car Wash is a self contained 3 brush, roll over type of machine. In the presoak cycle the vehicle is totally covered with soap flakes which are rinsed of in the return traverse after which the brush wash is started. In the first pass the vehicle is given a thorough cleaning with shampoo and gentle brushing action and in the return traverse liquid wax in predetermined quantity is sprayed over the vehicle surface. The horizontal brush keeps to the contour of the car body by electronic pressure sensing and its up/down movement controlled by a geared motor system. Accurate ampere sensing by use of Variable Frequency Drive provided constant speed and pressure control of horizontal brush for safe and smooth cleaning operation by UP and Down movement of brush, thus maximizing the cleaning process. 
• Provision is given in the machine to adjust the pressure setting of the horizontal brush to "Mild", "Medium" and "Hard", To suit Indian Conditions it also incorporates a luggage carrier avoidance circuit. The vertical brushes wash the sides of the vehicle automatically adjusting to varying vehicle widths. The movement of the vertical Units, makes the vertical brushes exert equal pressure on the vehicle side for excellent Cleaning of the Sides. The brushes are made of polyethylene material bristles mounted on PVC pads of 305mm length for easy replaceability. 2 to 3 electronic metering pumps monitor the correct ratio of mix of detergent/wax. 

Product Details:

• The PREMIER s is a self-contained, 2 brush roll over gantry-type machine giving a full pass wash to the vehicle. In the first pass the vehicle is given a thorough cleaning with shampoo and gentle brushing action and rinsed with water. The ventricle brushes wash the sides of vehicle automatically adjusting to varying vehicle widths. 

Additional Details:

• Easily Replaceable Brushes: The brushes are made of polyethylene material bristles having X' section profile, mounted on PVC pads of 305 mm (1 Ft.) for easy replaceability. 
•  Outstanding Quality Wash: Excellent brush coverage ensures a thorough wash. 
•  Shampoo Application: A shampoo reservoir is housed within the machine. The shampoo is injected into the water system by a metering pump ensuring an accurate balance of the mix. If required, an additional system can be supplied to apply war or rinse aid materials. 
•  Robust Construction: The machine is rigidly constructed from high-quality materials, all surfaces being fiddly treated for corrosion prevention. The appearance is enhanced by FRP molded coverings finished in soft colors. 
• Economics The washing operation is quickly and efficiently carried out, the time cycle varying from 3 minutes for a car to approximately 4 minutes for a large commercial vehicle depending on the vehicle.