Our Products
Room Heater
2 Products availableWelding Machine Parts
2 Products availableWelding Helmet
1 Products availableBusiness And Corporate Gifts
1 Products availableOffice Stationery And Calculators
1 Products availableIndustrial Chemicals
1 Products availableElectrical Cables & Wires
1 Products availableWelding Torches
1 Products availableRubber & Rubber Products
1 Products availableDrying Ovens
1 Products availableOur product range contains a wide range of Co2 Welding Torch, CO2 Gas Preheater and gas welding blowpipe
The Gravity Flow meter is accurately designed to give true easy to read flow measurement for Mig and Tig welding. The Gravity Flow Meter is built to be durable, long lasting product with brass body and shatter resistant polycarbonate tube.
Applications
Features
Gravity Thermelchalks are available in different temperature ratings and are systematically lined between 50 deg C to 600 deg C as per the requirement .These crayons are easy to use and are densely constructed for long lasting offering economical and accurate temperature readings.
Applications
Standard temperature ranges in deg C
| 50 | 60 | 70 | 75 | 80 |
| 100 | 120 | 125 | 150 | 175 |
| 180 | 200 | 225 | 250 | 275 |
| 300 | 350 | 400 | 450 | 500 |
Welding Hand Screen made from thermoplastic for high heat resistant & durability having space for 4 x 3 glass size with molded round handle for firm grip.
Applications
Features
K-2 is available in 3 forms as follows giving the same results. Application of K-2 Passivation solution is a must after the application of all forms of K-2 chemical in order to avoid further corrosion and contamination.
It is used to clean weld seams and the areas surrounding the welds.
HOW TO APPLY K 2 PASTE1. S1-56 Degreaser (Removal of oil 50gm/lit.) Apply liquid S1-56 Degreaser on to the surface for 5- 10 minutes.Then wash the surface thoroughly with water.2. K-2 paste is to be applied on the weld seam and surrounding area with a brush.3. Leave the K-2 paste on the weld seam for 15-45 minutes depending on the thickness of the oxide scale.4. Scrub the surface with a plastic bristled brush and then wash surface thoroughly with water.5. Apply K-2 passivation on the surface and leave it for 10 15 minutes.6. Wash the surface thoroughly with water.
The Gravity Range of welding hose pipe has been specifically designed for the Indian market. The hoses conform to pressure & tensile load requirements as laid down in BIS 447 for welding, cutting & allied processes.It is important to use the correct type of hose for the required gas to be used. Pressure drops will occur through hoses therefore allowances made to compensate for this when setting up equipment and adjusting requirements.
Applications
Recommended For Use With Welding And Cutting In Workshops, Ship Yards, Construction Sites , Power Stations , Etc.
| Nominal Bore (mm) | Tolerance on Nominal Bore (mm) | Minimum Thickness of Cover (mm) | Working Pressure (kgf/cm2) | Bursting Pressure (kgf/cm2) |
| 8.00 | ±0.75 | 1.00 | 12.50 | 50 |
| 10.00 | ±0.75 | 1.00 | 12.50 | 50 |
Gravity Cutting Nozzle is precision machined & hand finished to give a positive seat. Every nozzle is inspected & flame tested at the point of manufacture. The nozzle can be dressed using a nozzle cleaner provided with the nozzle. The flame shape & nozzle performance depends heavily on orifices having sharp, square edges.
Applications
Features
The standards achieved in design have resulted in a product at the leading edge of performance, reliability and safety. Working in conjunction with the diaphragm the valve delivers superior performance and control.
Applications
Designed To Maintain Pressure Settings For Welding, Cutting And Heating Job.
Features
Gravity LPG regulators are specifically designed to control the flow of liquid petroleum gas and are manufactured from forged brass. The regulator is compact in design offering consistent smooth operation featuring a well designed plastic molded knob for pressure adjustment.
Applications
Features
The GravityCo2 Gas Pre-Heateris designed to be connected between the outlet of a cylinder & inlet of a regulator , the powerful heating element heats the gas as it flows thru the body of the heater and thus avoiding regulator freezing .
Applications
Features
Gravity Portable Cutting Machine having wrapped round handle for easy portability made of pressed steel & fitted with 220 volts FHP geared reversible motor.
Applications
Features
Rugged & Reliable electrode oven provided with thermostat or digital control for precise setting of drying temperature required for diverse types of welding electrodes.
Applications
Features
flexible welding cable available in different sizes with outer sheath of natural rubber compound suitable for demanding working conditions with aluminum or copper conductor.
applications
Specifications
| Electrode Size | Equivalent Cable As Per IS :434 |
Manual Welding (sq. mm) | ||||
| Copper | Aluminium | |||||
| SWG | M.M | HOFR | TRS | HOFR | TRS | |
| 14 | 2.00 | – | 16 | 16 | 25 | 25 |
| 12 | 2.50 | – | 16 | 16 | 25 | 25 |
| 10 | 3.15 | 150A | 16 | 25 | 25 | 35 |
| 8 | 4.00 | 230A | 25 | 35 | 35 | 50 |
| 8* | 4.00 | 400A | 35 | 50 | 50 | 70 |
| 6 | 5.00 | 600A | 50 | 70 | 70 | 95 |
| 4 | 6.00 | 800A | 70 | 95 | 95 | 120 |
* For Longer Length Than 15 Mtr.
Wide range of both air-cooled & water-cooled tig welding torches in various amperage ranges to meet the diverse performance requirements featuring flexible, light weight & ISI certified welding cable for ultimate comfort & maneuverability.
Applications
Features
WELDING HELMET
Modern design high quality wide view welding helmet with fully adjustable headband & front shutter system.
Applications
Features
The use of flashback arrestor is required to limit the potential damage that may result if a flashback occurs. If not stopped aflashback may travel back to the cylinder. Gravity flashback arrestor have a very sensitive non return valve that stops the gas flow and a fine sintered filter that quenches the flame.
Applications
Features
Ajmeri Gate, Delhi 