Our Products
Monoblock Pumps
2 Products availableAC Motor
2 Products availableCentrifugal Monoblock Pumps
1 Products availableOur product range contains a wide range of Three Phase Openwell Submersible Monoblocks, Three Phase Horizontal Open Well Pumpset, Horizontal Openwell Submersible Pump Set (Domestic Series) and Horizontal Openwell Submersible Pump Set (Agriculture Series)
Kirti Electricals brings forth heavy-duty and cost-effective Horizontal Openwell Submersible Pump Set for domestic and agricultural use. Horizontal Openwell Submersible Pump Set is designed to provide efficient water solution for various applications. Designed to excellence, Horizontal Openwell Submersible Pump Set promises efficient performance at low operating cost.
Manufacturer and Exporter of Three Phase Horizontal Open well Pumpset.
Horizontal Openwell Submersible Pump Set (Domestic Series) is an efficient solution for all water requirements of household. Horizontal Openwell Submersible Pump Set is sturdy, strong, and engineered to last. Our valued customers can avail Horizontal Openwell Submersible Pump Set in different specifications as per their requirement.
Winding Wire : Poly Wrap Double coated copper wire
Applications :
Specifications 01
Power range | 0.5 HP – 3.0 HP |
---|---|
Speed | 2880 RPM |
Version | Single Phase 200-240V, 50Hz, A.C supply |
Degree of Protection | IP 58 |
Nominal delivery size in mm | 25, 50, 65 & 75 |
Type of Duty | S1 (continuous) |
Method of starting | Capacitor Start Capacitor Run (CSCR) / Permanent Split Capacitor (CSR) Direct Online upto 5kW SD upto 30 kW |
Maximum starts per hour | 6 times |
Specifications 02
Motor Body |
Stainless Steel with 1% Nickel |
---|---|
Volute Chamber |
Volute Chamber is designed to give the best possible hydraulic efficiency. |
Impeller |
Dynamically balanced Gun metal and hardened cast iron impeller offers vibration free operation with long life. |
Bearing |
Specially designed water lubricated bearings are used to withstand axial thrust loads with minimum wear and tear. |
Stator |
The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. |
Rotor Shaft |
Stainless Steel 420 H&T dynamically balanced rotor gives vibration free and noise free operation, thereby increase efficiency and lifecycle of the motor. |
Sealing |
Motor sealing is made by means of grommets, ‘O’ rings, Nitrile rubber oil seals and sand guard to avoid ingress of well water sand into the motor. |
Stamping | Electrical grade silicon steel sheet with 3.9 to 4.5 Watt loss/hour. |
Our valued customers can avail from us Horizontal Openwell Submersible Pump Set for agricultural use. With sturdy and corrosion resistant body, Horizontal Openwell Submersible Pump Set (Agricultural Series) can be used for underwater applications. Horizontal Openwell Submersible Pump Set is easy to install, cost-effective to maintain and pocket friendly too. Horizontal Openwell Submersible Pump Set can be used for fountains, wells, sumps, and water tanks.
Winding Wire : Poly Wrap Double coated copper wire
Applications :
Specifications 01
Power range | 3.0 HP – 15 HP |
---|---|
Speed | 2880 RPM |
Version | Three phase, 380-415V, 50Hz, A.C supplY |
Degree of Protection | IP 58 |
Nominal delivery size in mm | 50, 65, 75 & 100 |
Type of Duty | S1 (continuous) |
Method of starting | Capacitor Start Capacitor Run (CSCR) / Permanent Split Capacitor (CSR) Direct Online upto 5kW SD upto 30 kW |
Maximum starts per hour | 6 times |
Specifications 02
Motor Body |
High grade Cast Iron materials |
---|---|
Volute Chamber |
Volute Chamber is designed to give the best possible hydraulic efficiency. |
Impeller |
Dynamically balanced Gun metal and hardened cast iron impeller offers vibration free operation with long life. |
Bearing |
Specially designed water lubricated bearings are used to withstand axial thrust loads with minimum wear and tear. |
Stator |
The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. |
Rotor Shaft |
Stainless Steel 420 H&T dynamically balanced rotor gives vibration free and noise free operation, thereby increase efficiency and lifecycle of the motor. |
Sealing |
Motor sealing is made by means of grommets, ‘O’ rings, Nitrile rubber oil seals and sand guard to avoid ingress of well water sand into the motor. |
Stamping | Electrical grade silicon steel sheet with 3.9 to 4.5 Watt loss/hour. |
The AC Electric Motor, offered by us, can operate in both motoring and braking modes to generate electrical energy from mechanical energy. We are a well-known AC Electric Motor Manufacturer, Exporter and Supplier in India.
Technical Specifications
We are counted among the prominent business organizations engaged in manufacturing, supplying and exporting a comprehensive assortment of Centrifugal Monoblock Pump. Available in varied sizes & specifications, our Centrifugal Monoblock Pump can also be customized as per the requirements of the customers. The Centrifugal Monoblock Pump, we offer, can be applied for various applications like domestic, fountain, high rise building, construction, agriculture, drip & sprinkler irrigation etc.
Applications :
Additional Information:
Packaging Details : Export Worthy Packing
Specifications
Power range | 0.5 HP – 3 HP (1Ph.) 3 HP – 20 HP (3 Ph.) |
---|---|
Speed | 2880 RPM |
Version | Single Phase 200-240V, Three phase, 380-415V, 50Hz, A.C supply |
Degree of Protection | IP 44 |
Nominal delivery size in mm | 25, 40, 50, 65, 75 & 100 |
Type of Duty | S1 (continuous) |
Insulation Glass | B (class ‘F’ on demand) |
Features
Motor Body |
Graded Cast Iron |
---|---|
Volute Chamber |
Cast Iron Volute Chamber is designed to give the best possible hydraulic efficiency. |
Suction & Delivery Flange |
Cast Iron |
Impeller |
Dynamically balanced impeller offers vibration free operation with long life |
Bearing |
Specially designed water lubricated bearings are used to withstand axial thrust loads with minimum wear and tear. Thrust plate with fibre pad and CT bearing of gunmetal. |
Stator |
The stator is wound with special water proof Synthetic film insulated copper winding wires and made up of low watt loss steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. |
Rotor Shaft |
Stainless Steel 420 H&T dynamically balanced rotor gives vibration free and noise free operation, thereby increase efficiency and lifecycle of the motor. |
Sealing |
Monoblock pumps with Asbestos Gland Packing and Mechanical Steel (Carbon/Ceramic) |
Stamping |
Super enameled EC grade Copper wire |
Cooling Fan |
P.V.C. Nylon / C.I. |
Cooling Fan Cover | M.S. |
Details
The Self Priming Monoblock Pump, we offer, is suitable for wide voltage operation ranging from 160 to 240v V. Our Self Priming Monoblock Pump features brass forged impeller and high quality mechanical seal double shielded ball bearings. There is no need of additional lubrication tefc capacitor start and run type motor. Our Self Priming Monoblock Pump comes with high quality enameled copper wire fitted with T.O.P (thermal overload protector) for safety of motor self-priming up to 30ft of suction lift. Our Self Priming Monoblock Pump finds applications in residential bungalows, apartments, gardening and small plants solar heater systems, lawn sprinklers, small farms car washing, booster applications etc.
Features :
Applications :
Technical Specifications
Motor Body | 0.37 kW /0.75 kW |
---|---|
Head Range | 6 – 36 m |
Capacity | 3200 – 300 LPH |
Voltage | 160-240V (1PH) |
Liquid / Operating Temp | Clear Water / 40°c |
Material Of Construction
Power Rating | Aluminum Extruded |
---|---|
Impeller | Forged Brass/ Gunmetal |
Delivery Casing | Cast Iron |
Bracket, E.Cover | Cast Iron |
Shaft | Carbon / Stainless Steel |
Details