Our Products
Fuel Injection System
1 Products availableChemical Reactors & Process Tanks
1 Products availableIndustrial Machinery
1 Products availableFertilizer Machine
1 Products availableWe are leaders in the market for providing best range of firing equipments, soot blowing equipment, POLUTION CONTROL EQUIPMENTS and HEAVY PIPE FABRICATION
| Boiler Construction is Three Pass Fully Wet Back Type. |
| Designed with proper grate area and furnace volume for efficient burning of solid fuels. |
| Proper Furnace Volume is provided For Liquid and Gaseous Fuels for better Combustion Efficiencies. |
| Higher boiler efficiencies as designed properly with required heating surface areas based on Fuel Type. |
| Available for liquid fuels like LDO/HSD/FO/LSHS, Gaseous fuels like Natural Gas/LPG/Biogas and Solid Fuels like Bagasse, Husk, Wood, Coal and other Agro-Wastes. |
| Good Steam Quality up to 98% dry saturated as large disengaging surface and free board distance in boiler shell. |
| Consistent and trouble free performance under Normal Operating Conditions. |
| Capacities from 50 kg/hr to 6000 kg/hr for Solid Fuels and from 50 kg/hr to 20, 000 kg/hr for Oil/Gas Firing are available. Pressure Ratings 10.54 kg/sq.cm, 15 kg/sq.cm, 17.5 kg/sq.cm, 21 kg/sq.cm or as per Clients Requirement |
| Manufactured in the range of 1000 kg/hr to 15, 000 kg/hr Capacities with different pressure ratings of 10.54 kg/sq.cm, 15 kg/sq.cm, 17.5 kg/sq.cm, 21 kg/sq.cm. |
| Manufactured in both Five Side Membrane Panel and Two Side Membrane Panel Type Furnace Designs. |
| Advantages of both Water Tube and Smoke Tube Boilers together. |
| High Fuel Combustion Efficiency as Greater Furnace Volume and more Grate Areas. |
| Provided with Different type of grates based on type of fuel, capacity of the boiler and application in the process. Available with Fixed Grate/Dumping Grate/Pulsating Grate/Travelling Grate/FBC Grate. |
| Manual and Auto Feeding Arrangements are possible. |
| Quick Steam Generation and Better performance on Fluctuating Loads. |
| Greater Shell Diameters with properly designed shell internals for Better Steam Purity up to 98% Dry . |
| Proper Water Circulation Ratios and Greater Heat Transfer Areas Makes Our Boiler more reliable and has longer life of steady operation. |
| Boiler Construction is Three Pass Fully Wet Back Type. |
| Designed with proper grate area and furnace volume for efficient burning of solid fuels. |
| Proper Furnace Volume is provided For Liquid and Gaseous Fuels for better Combustion Efficiencies. |
| Higher boiler efficiencies as designed properly with required heating surface areas based on Fuel Type. |
| Available for liquid fuels like LDO/HSD/FO/LSHS, Gaseous fuels like Natural Gas/LPG/Biogas and Solid Fuels like Bagasse, Husk, Wood, Coal and other Agro-Wastes. |
| Consistent and trouble free performance under Normal Operating Conditions. |
| Capacities from 1, 00, 000 kcal/hr to 100, 00, 000 kcal/hr with Maximum Water Temperatures of 230 deg.C. |
| Manufactured in both Smoke Tube and Water Tube Type Construction. |
| Natural or Forced Circulation Type Configuration is possible. |
| WHRU system is designed based on the Waste Gases Type and other Basic Design Parameters, Hence Reliable Operation. |
| Smoke chambers are lined with castable refractory material to protect the inside surfaces. |
| Simple arrangement of smoke chamber door fixing, facilitate easy periodical tube cleaning. |
| Finned Tube Construction is available in water tube forced circulation Waste Heat Recovery arrangement, makes the WHRU compact. |
| Steam Heat Recovery Boilers ar available in both Bi-Drum and Single Drum type arrangements. |
| Due to proper shell or steam drum diameters, steam volume is more & hence better steam quality. |
| Steam Quality is better as Properly Designed Drum Internals are Provided. |
| Provided with accessories like Super Heater, Economiser, Deaerator Tank etc. as per requirement for better performance of the Waste Heat Boiler. |
| Capacity and Working Pressure of the Waste Heat Recovery is considered as per Customers requirement. |
| Heat Exchangers and Waste Heat Recovery Boilers are especially made as per codes like IBR 1950 with its Latest Amendments/TEMA etc. |
| Designed as per customers requirements and as per latest amendments of different codes to suit the application. |
| Our Vessels are more Reliable and Durable as Construction of the vessels is done strictly following the Norms of Codes and as per Standard Engineering Practices. |
| Good workman ship makes our vessels more elagant. |
| All testing facilities are in house. |
| Vessels are Designed as per Design Codes such as ASME Section VIII, Division I, ABS, IS 2825, IBR 1950 with its Latest Amendments etc. |
We offer excellently designed Fuel Feeding Systems, which are manufactured at our facility using graded alloys. These high performance Fuel Feeders have extensive application in feeding of the fuels in various industries. We manufacture these using sophisticated technologies, offering them qualities like sturdy construction, high speed, durability, trouble free performance and low maintenance cost. We also offer customization in our products.
Some of the variants availed by us are as follows:
| Bagasse rotary type feeders |
| Screw feeders |
| Bagasse silos with drum feeders |
We have on offer high grade Fuel Spreaders which are manufactured using sophisticated technology and quality raw materials. These are efficient solution for minimizing the amount of waste and residual material for disposal. The Fuel Spreaders provided by us are perfect for direct feeding of incinerators and homogeneous feeding of bins and stores. These are high performance spreaders with little maintenance, offering reliable and continuous feeding.
Some of the variants of our spreaders are as follows:
We manufacture a large range of Firing Equipments, which are manufactured using high grade materials in compliance with industry standards. These have extensive application in initiating fire process of the furnaces in various industries. These Firing Equipments can also be customized as per the clients requirements.
We offer the following variants in our products:
| Traveling grate |
| Pulsating grate |
| Dumping grate |
| FBC grate |
We design and manufacture a wide range of Soot Blowing Equipments, which are designed and fabricated under the close supervision of our quality auditors. These are efficient in removing unwanted deposits of soot on heating surface of pressure parts. Our systems are perfect for proper cleaning of heating surface for best results of heat transfer. Some of the distinguishing features of our products are as follows:
| Solid high speed steam jot due to specially designed nozzles |
| Highly effective cleaning |
| Very low steam consumption |
| Minimal power requirement |
| Easy to operate and install |
| Simple design |
| Sturdy and compact construction |
| Low maintenance |
| Dust protection due to totally enclosed construction |
Our Soot Blowing Equipments are available in following variants:
| Manual and motorized rotary soot blowers |
| Motorized retractable soot blowers |
| Sequential operating control arrangement |
We provide effective solution for pollution control. Our engineers have designed a quality range of Pollution Control Equipments for checking pollution levels. These are able to handle air, fume or vapor release in the environment. Our equipments are used extensively in various industries, like pulp & paper, chemical processing, plating or waste water treatment industries. We use high grade materials to manufacture these equipments, thereby ensuring their quality.
We offer the following variants in this category:
| We offer Heavy Pipe Fabrication work for a range of heavy duty and robust structural components. These are used extensively in various industries, and require services of experts in their installation. We provide you these services at very low costs and in stipulated time frame. |
