Our Products
Fashion Jewelry
2 Products availableGaskets
1 Products availablePlastic Component
1 Products availableValves & Valve Fittings
1 Products availableGifts, Handicrafts & Artifacts
1 Products availableWashers
1 Products availableWe are leaders in the market for providing best range of SWR Seals, Kesaria NBR O-Ring Repair Kit- 5C, Kesaria Silicone O-Ring Repair Kit- 5C, Food Grade Silicone O Rings and Kesaria Silicone Iron Rest Pad
ptfe is resistant to corrosion & all chemical even at very high temperatures & pressures. It has lowest coefficient of friction of all solid & rigid materials. Ptfe components can be used at temperatures ranging approx. -180c to +260 c. Ptfe has excellent electric properties which remain constant regardless of frequency & temperature. The basic material is ptfe but in order to assure an optimal function, a variety of fiiiers like carbon, giass, bronze & graphite can be added.
kesarla manufactures a variety of high performance static & dynamic ptfe parts designed for applications where high mechanical & chemical loads exceed the performance of traditional seaiing materiais. Ptfe parts are commonly used within chemical, food & drug, petrochemical, hydraulic & fluid applications. Our range of products includes:
o-rings and washers rods, bush and sheet, baii vaive gaskets, turned parts, bellow and flange gaskets & custom molded parts.
kesaria rubber is one of the largest manufacturers and exporters of rubber o-rings in gurugram, india. We offer our esteemed customers a wide range of elastomeric materials for both specials and standard applications which allow the o-ring to seal basically all liquid and gaseous media. We specialize in the manufacturing of rubber o-rings ranging from 3 mm to 500 mm. We manufacture o-rings in various sizes and colors from various types of rubber like fkm or viton, silicon, epdm, nbr, neoprene, sbr & natural.the hardness rating on a shore a scale for o-rings can be 30 95 durometer. Exact specifications should be clarified by our engineers, as chemical and physical properties of an o-ring can differ based on manufacturing technique. When custom o-rings are required, the width or thickness, insider diameter, and outside diameter are important to consider.
seals are used to create a barrier between a rotating and a stationary surface. They function to retain or separate lubricants or fluids, keep out contamination, and contain pressure. V-ring seals are all rubber seals used primarily to exclude dirt and other contaminants. Wipers are also flexible lip exclusion seals. Hydraulic seals and pneumatic seals are designed for the reciprocating motion that is common in hydraulic and pneumatic applications, such as cylinders. Rod seals & piston seals are radial seals. The seal is fit onto a shaft with the sealing lip contacting the housing bore. Double acting or bi-directional seals are effective when sealing in both directions
important dimensions to consider when specifying seals include shaft od, id, housing bore diameter or seal outer diameter, axial cross section or thickness, and radial cross section. Important service limits parameters to consider include maximum operating speed, maximum operating pressure, vacuum rating, operating temperature and any fluids with which they may come in contact. Rubber sealing element or lip material choices for seals include aflas, viton, silicon, epdm, tpr, nbr, neoprene, pu, sbr & natural. The hardness rating on a shore a scale for seals can be 30 95 durometer. Exact specifications should be clarified by our engineers, as chemical and physical properties of seals can differ based on manufacturing technique.
washers are disks of rubber placed beneath a nut, an axle bearing, or a joint, to relieve friction, prevents leakage, isolate, prevent loosening or distribute pressure. There are many different types of washers and washer type products for a variety of applications. Common types include flat washers, beveled, c-washers, d-shaped washers, sealing washers, spherical washers, square washers & shoulder washers. Flat washers are thin, flat, and circular general-purpose washers, with a centrally located hole.
washers can be specified in ansi nominal sizes or ansi metric sizes. Important size dimensions to consider when specifying washers include inside diameter, outside diameter, thickness or working height, and rated or working load. Materials of construction include aflas, fkm or viton, silicon, epdm, nbr, neoprene, ptfe, pu, sbr & natural. The hardness rating on a shore a scale for washers can be 30 95 durometer. Exact specifications should be clarified by our engineers, as chemical and physical properties of washers can differ based on manufacturing technique.
Additional Information:
Delivery Time : 15 Days
KESARIA Produces O Rings to prevent leakage of all types of liquids, gases & oil in equipments used for wide range of applications, specifically Food Processing & Medical Industry.
Kesaria Silicone O Rings are made up of finest quality food grade silicone material in compliance with set industrial norms. These O Rings have superb thermal, chemical & electrical resistance. Our Food Grade Silicone O Rings are free from peroxide, non-toxic, non-allergic, withstand discoloration, resistance to bacteria build-up & provide a reliable service at wide temperature range.
Kesaria Food Grade Silicone O Rings are widely used in Food & Beverage Industry, Dairy Industry, Medical Industry, Water Purifiers, Cooking Utensils etc.
Additional Information:
Delivery Time : 15 Days
a gasket is a mechanical seal which fills the space between two or more mating surfaces, generally used to prevent fluid or gas leakage from or into the joined objects while under compression to seal high pressure under static conditions. The gasket must be able to maintain a seal under pressure and temperature changes. Important size dimensions to consider when specifying washers include inside diameter, outside diameter, thickness or working height, and rated or working load.
we manufacture a large variety of rubber gaskets of different shapes & sizes from a variety of rubber grades like viton, silicon, epdm, nbr, neoprene, sbr & natural. The hardness rating on a shore a scale for gaskets can be 30 95 durometer. Exact specifications should be clarified by our engineers, as chemical and physical properties of gaskets can differ based on manufacturing technique.
rubber diaphragms are flexible seals that prevent unwanted transmission of substances between two places. These substances can be liquids, gases or solutions. The flexible nature of this diaphragm allows pressure effects to cross the barrier but not the material being contained. Diaphragms are also used to protect a process fluid from the pressure sensor. They are characteristically tough & dynamic and essential in many flow control applications. Diaphragms can be manufactured to suit a wide variety of applications, which can be found in all sections of industry.
diaphragm has wide applications include electrical & pneumatic control valves, pressure regulators, high pressure pump, gas regulators, and pressure relief valve etc. Diaphragm materials range are nbr, silicon, epdm, neoprene however exact material specifications should be clarified by our engineers, as chemical and physical properties of grommets can differ based on manufacturing technique & application.
rubber ring for shafts requiring a dynamic seal (primary or back-up) in the axial direction. The body of v seals rotate with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counterface. Additionally, the v series rings has good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt and other foreign materials. V-rings are available in both buna n and viton .
typical applications: conveyor rollers, appliances, motors, agriculture, wheel hubs, appliances, pumps and gear boxes etc.
1) Kesaria Iron Rest Pads are made from high quality silicone in the shape of iron which makes ironing very convenient as you can rest your hot Iron on it without any damage.
2) Kesarias iron rest pads are highly durable, lightweight & long lasting with high heat resistant capacity upto 229 degree celsius.
3) Protects surfaces from a hot iron, prevent burn spots on your ironing board/mat or even your carpet, help prevent scratches on your iron & safe for use on ironing boards, tables or counters.
4) Raised lines allow good air flow to help your iron cool faster. The mat uses specially designed silicon rubber supports on base pad to keep iron elevated so it cannot harm the surface underneath while also providing a slip resistant protection to keep the iron from falling off.
5) Small & Light pad can be kept on any side of the ironing board as convenient. The hot iron can be kept flat on this surface so saves time of switching off the iron. You can restart ironing without having to wait for the iron to heat up.
6) It is high heat resistant & can handle up to 229 C of heat resistance. Silicone is known for its ability to maintain its properties and structure over a wide temperature range, which is good enough to handle most irons.
8) Easy to clean and store. You can roll, fold, or even hang for easy and convenient storage. It is easy to clean with warm water and soap and can be wiped dry or left to air dry. Its also dishwasher safe.
9) The silicone rest pad is slip resistant so that the iron does not accidentally fall or slip when it's on standby.
Additional Information:
Delivery Time : 15 Days
our o-ring kit contains a total of 382 pieces in 30 assorted sizes that are oftenly used in various industrial applications.the hard-wearing saffron storage case with a detailed label on the top indicating the sizes & quantity of o-ring seals in each compartment.the o-rings are made up of soft, pliable & durable nitrile rubber material (nbr). an o- ring is a loop of elastomer with a round cross-section intended to be sealed in a groove & squeezed together at the interface to block the passage of liquids or gases.it can create a static or dynamic seal.the hardness rating of our o-rings on a shore- a scale is 4090 durometer.and can be used across a wide range of temperature from -45 to 130 degree celsius.our o-rings can bear the high impact of oil, watertightness, corrosion & have high tensile strength that makes them suitable for high dynamic loads & abrasion resistant. as well as their super pliable construction & extra thick wall design stands for long term service & durability. kesaria o-rings provide sealing & prevents leaking for a wide range of applications such as plumbing, machinery, hydraulic & pneumatic repair & automobile etc.
1) CLINT is made up of premium quality 100% PTFE material & is used for sealing threaded joints & preventing leakage in various industrial Applications.
2) It is designed in such a way that it can seal basically all liquid & gaseous media for a long term of period & is highly durable.
3) When covering a thread portion for sealing CLINT Thread Seal Tape has to be rolled only 4 times whereas other thread seal tapes are rolled 12 times as it is three times more thicker than other tapes.
4) CLINT is packed in a box consisting of all the detailed technical specifications & instructions to use.
5) Each box contains a pack of 10 Pieces & each piece has been kept separated & organized inside the box.
6) Each roll of PTFE Tape is covered with a sturdy plastic cover that protects the tape from dust once the work has been done just place the roll back into the cover it provides safety to your tape.
7) Our PTFE Tape has a network structure consisting of micro- slender fibers & knots that provides high durability, excellent toughness & high longitudinal strength also its quite easy to deform lately.
8) CLINT PTFE Plumbers Tape provide sealing & prevents leaking for a wide range of applications such as Plumbing- Pipe Fittings, Water Pumps, Water Taps & Faucets, Electronic Appliances like Washing Machine, Water Purifier, connector Fittings, Aquariums & any other water related equipment, Automotive, Hydraulics & Pneumatic Repair & many more.
Additional Information:
Delivery Time : 15 Days