These cooling incubators are designed specially for close control of incubation / Storage temperatures. These are used for storage for BOD .tests, Storage of sensitive Cultures, Vaccines, etc. culture of bacteris micro - organism & plantlife seed germination work, serum incubation studies & immunological work etc.

Construction o fthe double wall the exterior is made os GI with powder coating flush Fitting insulated door has magnetic gasket, the inner chamber is made up of 304 quality stainless steel.

The plexiglas inner door makes it possible to inspect specimens without disturbing the temperature the shelf postion of trays is adjustable.

A compartment is formed at the back of interior into which is fitted the refrigeration evaporator , heater & powerful Centrifugal forced air circulator for creating positive airflow through the incubator. A hermetically sealed compressor housed below the unit provides temperature below ambient , built in safety PT -100 Sensor prevents damage to sample in case of temperature controller malfunctioning .

All controls are mounted on the top of the unit for better viewing & controlling. A solid state temperature with digital & Pt-100 sensor. Amirco processor controller can be provided with cyclic digital timer as per the given order.

These humidity test chamber can satify a variety of environmental condition. They are especially suitable for the simulation of temperature & there relative Humidity (RH) values above freezing point, seed germinator are useful for seed testing, biological studies, forestry research work, stability, packing & electronic test specimens. The Chamber are widely used for testing electronic & electric components, corrosion test on mechanical assemblird, test on packages, paints &varnishes, cement plants & variety of application.

Construction of the double walls the exterior is made of GI. With power coating Flush fitting insulated door has magnetic gasket, the inner chamber is mde up of 304 quality stainless steel. The Plexiglas inner door makes it possible to inspect specimens without disturbing the temperature. The self postion of trays is adjustable. A rear chamber of interior if fitted the refrigeration evaporator, heater & powerful air circulating fan for creating positive airflow through the chamber. A hermetically sealed compressor housed below the unit provides temperature below ambient. The same compartment houses a boiler with the immersion heater & water level controller for creating humidity. All controls are mounted on the top of the unit for better Viewing & controlling. A solid state temperature controller with digital temperature display control are simple to set direct humidity % RH & temperature in digital indicator.

Refrigerated water baths are widely used for day bacteriological and varied laboratory application requiring incubation as well as general test and procedures in a variety of research and testing laboratories including Wassermann, Kilmer tests. Apart from that these refrigerated water baths have a variety usages in tissues culture application, enzyme reaction studies, growth observation studies, fermentation analysis and various other general specialized application in various laboratories. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individuals and specialized research application.

Apart from that we are supplying out refrigerated water bath in India catering to variety of customers ranging from defense installations, Research laboratories, Educational Institutes and various R & D laboratories of leading a national an multinational companies.

Construction Details refrigerated water bath:

Our refrigerated water baths are double walled convection heated units, outer body of our refrigerated water baths is constructed out of thick PCRC steel sheet, duly pre-treated with primers for rust proofing and painted with air drying paint / stove enamel / powder coating. The inside chamber of the unit is made of heavy gauge stainless steel sheet of grade ss304. the unit is provided with one stainless steel racks.

Heating:

Indirect heating system is provide in our refrigerated water bath comprising of air heaters made of high grade kanthal A-1 wires of suitable wattage. The temperature is evenly distributed throughout the chamber through natural water convection mechanism ensuring a very good temperature sensitivity.

Cooling :

An energy efficient cooling unit is installed in our carbon dioxide incubator to enable bio chemical demand studies at lower room temperature. We uses ISI marked high end CFC free comressors of kirloskar / Tecumseh make, conforming to latest international standards and guidelines.

Temperature Range:

Temperature range of standard refrigerated water bath models are 50 c to 850 c However we have capacity modify the same suit the individual specialized requirement of out customers

Temperature Sensitivity:

Temperature inside our refrigerated water bath is controlled with a sensitivity of +-0.5o c or better(with PID Controller )

Front Panel:

Front panel of our refrigerated water bath comprises of on / off switches h heating & mains indicator lamps and temperature controller.

Internal Capacity :

Standard 5 lt/10 ltr/20 ltr/35 ltr/ 50 ltr.

Note : The above mention sizes are of our standard refrigerated water bath. However we are fully capable to cater to demand of any customized size for any special application.

Incubators are widely used for day to day bacteriological and culture tests performed in various laboratory applications.

We specialize in both standard and customized models, specially designed to meet the challenging demands of various scientists for individual and specialized research applications.We are supplying our Bacteriological incubators in India catering to variety of customers ranging from Defence installiations, Research Laboratories, Educational Institutes and Various R&D Laboratories of leading national and multinational companies.

Bacteriological Incubators are triple walled convention heated units.Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with lasting stove enamel or elegantly power coated.The inner chamber is made of heavy guage stainless steel of ss-304 grade.The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bacteriological incubators. The unit is mounted on a study steel frame and provided with castor wheels(larger Sized Models Only)for easy movement inside the labrotary. The unit is provided with one to three stainless steel shelves(as per the inner size).

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade tublar heater of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans at the back ensuring a very good temperature sensitivity.

Temperature Range:

Temperature range of our standard bacteriological models are 50c above ambient temperature to 70oc .However we have the capacity to modify the same to suit the individual specialized requirements of our customers.

Temperature Sensitivity:

Temperature inside our bacteriological incubators are controlled with a sensitivity of +-0.5oC or better

Front Panel:

Front Panel of our units comparises of on/off switches Heating and mains indicators lamps, temperature controllers/Thermostat

Temperature control:

The temperature inside our bacteriological incubator is controlled either through hydraulic type German thermostat(Sensitivity-+2oc) through solid or Micro-processor based on temperature controllers cum indicators.

Inner Chamber(W*D*H) Volume Liters

The Shaker Water bath is double walled with glass-wool insulation from all side. Outer M.S enamel painted and inner chamber stainless steel polished .Removable S.S tray with lotus clamps suitable for various flasks is fitted inside the workinf chamber. The speed and stroke length of tray platform is adjustable.

Tublar S.S sheath heater are fitted below platform are controlled by Digital Temperature Controller. Temperature Up to 100? C=0.5? A timer can be provided. The Unit have gabled lid added drain cock.40 to 160 strokes per minute.Speed control by solid regulator.

Tray Capacity :6 Flasks of 250 Ml9 Flasks of 250 Ml 12 Flasks of 250 Ml18 Flasks of 250 Ml

Application in various research laboratories for shaking the liquid in glass flasks. It is a concept bench top model unit. Heavy platform is fitted with rubber disc to hold conical flasks from 50mlm to 1000ml capacity. The shaker is mounted on ball bearing crankshafts to give an orbital circular motion to the flasks. The diameter of the orbit is approximately 2".

The entire assembly is mounted on a rental casing which houses a motor coupled by means of V belt with pitch pulleys. The motors supplied is of Compton Greaves or equivalent make.

Rotary Flask Shaker:

Power requirements To work on 220 Volts, Single phase, 50 Hz, AC supply

Platform Sizes:

Holding Capacity H.P(Motor) 450mm*450mm 16flasks of 250ml 0.25 550mm*550mm 24flasks of 250ml 0.25 850mm*650mm 36flasks 0f 250 ml 0.25

Griffin Flask Shaker

Heavy duty M.S Body mounted on four vibration absorbing rubber legs.AFHP motor is used. The Horizontal Spindle is caused to oscillate through a small angle. Flask of 500ml Capacity each can be mounted at any desired angle on the spindle. Continuously variable speed control can be achieved from a gentel motion to a violent agitation.Unit works on 230V AC, 50 Hz.Supply.

Incubators are widely used for day to day bacteriological and culture tests performed in various applications. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications.We are supplying our bacteriological incubators in India , catering to a variety of customers ranging from defence Installations, Research Laboratories, Educational Institutes and various R&D Laboratories of leading national and multinational companies.

Bacteriological Incubators are double walled convection heated units outer pre- treated withprimers and rust proofing and painted with long lasting stove enamel oe elegantly powder coated.The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade.The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bacteriological incubators. The unit is mounted on a sturdy steel frame and Provided with castor wheel (large Sized Models Only) for easy movement inside the laboratory.The unit is provided with one to three stainless steel shelves(As per the inner size).

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade tublar heaters of suitable wattage .The warm air is evenly distributed throughout the chamber through natural convention.

Temperature Range:

Temperature inside our bacteriological incubators are controlled with a sensitivity of -+0.5oc better.

Front Panel:

Front panel of our units comprises of on/off switches heating and mains indicators lamps, temperature controller/Thermostat,

Temperature Control :

The temperature inside our bacteriological incubators is controlled either through hydraulic type German thermostat (sensitivity -+2oc) or through sold state or micro processor based

These cooling incubators are designed specially for close control of incubation / Storage temperatures. These are used for storage for BOD .tests, Storage of sensitive Cultures, Vaccines, etc. culture of bacteris micro - organism & plantlife seed germination work, serum incubation studies & immunological work etc.

Construction o fthe double wall the exterior is made os GI with powder coating flush Fitting insulated door has magnetic gasket, the inner chamber is made up of 304 quality stainless steel.

The plexiglas inner door makes it possible to inspect specimens without disturbing the temperature the shelf postion of trays is adjustable.

A compartment is formed at the back of interior into which is fitted the refrigeration evaporator , heater & powerful Centrifugal forced air circulator for creating positive airflow through the incubator. A hermetically sealed compressor housed below the unit provides temperature below ambient , built in safety PT -100 Sensor prevents damage to sample in case of temperature controller malfunctioning .

All controls are mounted on the top of the unit for better viewing & controlling. A solid state temperature with digital & Pt-100 sensor. Amirco processor controller can be provided with cyclic digital timer as per the given order.

These humidity test chamber can satify a variety of environmental condition. They are especially suitable for the simulation of temperature & there relative Humidity (RH) values above freezing point, seed germinator are useful for seed testing, biological studies, forestry research work, stability, packing & electronic test specimens. The Chamber are widely used for testing electronic & electric components, corrosion test on mechanical assemblird, test on packages, paints &varnishes, cement plants & variety of application.

Construction of the double walls the exterior is made of GI. With power coating Flush fitting insulated door has magnetic gasket, the inner chamber is mde up of 304 quality stainless steel. The Plexiglas inner door makes it possible to inspect specimens without disturbing the temperature. The self postion of trays is adjustable. A rear chamber of interior if fitted the refrigeration evaporator, heater & powerful air circulating fan for creating positive airflow through the chamber. A hermetically sealed compressor housed below the unit provides temperature below ambient. The same compartment houses a boiler with the immersion heater & water level controller for creating humidity. All controls are mounted on the top of the unit for better Viewing & controlling. A solid state temperature controller with digital temperature display control are simple to set direct humidity % RH & temperature in digital indicator.

Refrigerated water baths are widely used for day bacteriological and varied laboratory application requiring incubation as well as general test and procedures in a variety of research and testing laboratories including Wassermann, Kilmer tests. Apart from that these refrigerated water baths have a variety usages in tissues culture application, enzyme reaction studies, growth observation studies, fermentation analysis and various other general specialized application in various laboratories. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individuals and specialized research application.

Apart from that we are supplying out refrigerated water bath in India catering to variety of customers ranging from defense installations, Research laboratories, Educational Institutes and various R & D laboratories of leading a national an multinational companies.

Construction Details refrigerated water bath:

Our refrigerated water baths are double walled convection heated units, outer body of our refrigerated water baths is constructed out of thick PCRC steel sheet, duly pre-treated with primers for rust proofing and painted with air drying paint / stove enamel / powder coating. The inside chamber of the unit is made of heavy gauge stainless steel sheet of grade ss304. the unit is provided with one stainless steel racks.

Heating:

Indirect heating system is provide in our refrigerated water bath comprising of air heaters made of high grade kanthal A-1 wires of suitable wattage. The temperature is evenly distributed throughout the chamber through natural water convection mechanism ensuring a very good temperature sensitivity.

Cooling :

An energy efficient cooling unit is installed in our carbon dioxide incubator to enable bio chemical demand studies at lower room temperature. We uses ISI marked high end CFC free comressors of kirloskar / Tecumseh make, conforming to latest international standards and guidelines.

Temperature Range:

Temperature range of standard refrigerated water bath models are 50 c to 850 c However we have capacity modify the same suit the individual specialized requirement of out customers

Temperature Sensitivity:

Temperature inside our refrigerated water bath is controlled with a sensitivity of +-0.5o c or better(with PID Controller )

Front Panel:

Front panel of our refrigerated water bath comprises of on / off switches h heating & mains indicator lamps and temperature controller.

Internal Capacity :

Standard 5 lt/10 ltr/20 ltr/35 ltr/ 50 ltr.

Note : The above mention sizes are of our standard refrigerated water bath. However we are fully capable to cater to demand of any customized size for any special application.

Incubators are widely used for day to day bacteriological and culture tests performed in various laboratory applications.

We specialize in both standard and customized models, specially designed to meet the challenging demands of various scientists for individual and specialized research applications.We are supplying our Bacteriological incubators in India catering to variety of customers ranging from Defence installiations, Research Laboratories, Educational Institutes and Various R&D Laboratories of leading national and multinational companies.

Bacteriological Incubators are triple walled convention heated units.Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with lasting stove enamel or elegantly power coated.The inner chamber is made of heavy guage stainless steel of ss-304 grade.The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bacteriological incubators. The unit is mounted on a study steel frame and provided with castor wheels(larger Sized Models Only)for easy movement inside the labrotary. The unit is provided with one to three stainless steel shelves(as per the inner size).

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade tublar heater of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans at the back ensuring a very good temperature sensitivity.

Temperature Range:

Temperature range of our standard bacteriological models are 50c above ambient temperature to 70oc .However we have the capacity to modify the same to suit the individual specialized requirements of our customers.

Temperature Sensitivity:

Temperature inside our bacteriological incubators are controlled with a sensitivity of +-0.5oC or better

Front Panel:

Front Panel of our units comparises of on/off switches Heating and mains indicators lamps, temperature controllers/Thermostat

Temperature control:

The temperature inside our bacteriological incubator is controlled either through hydraulic type German thermostat(Sensitivity-+2oc) through solid or Micro-processor based on temperature controllers cum indicators.

Inner Chamber(W*D*H) Volume Liters

The Shaker Water bath is double walled with glass-wool insulation from all side. Outer M.S enamel painted and inner chamber stainless steel polished .Removable S.S tray with lotus clamps suitable for various flasks is fitted inside the workinf chamber. The speed and stroke length of tray platform is adjustable.

Tublar S.S sheath heater are fitted below platform are controlled by Digital Temperature Controller. Temperature Up to 100? C=0.5? A timer can be provided. The Unit have gabled lid added drain cock.40 to 160 strokes per minute.Speed control by solid regulator.

Tray Capacity :6 Flasks of 250 Ml9 Flasks of 250 Ml 12 Flasks of 250 Ml18 Flasks of 250 Ml

Application in various research laboratories for shaking the liquid in glass flasks. It is a concept bench top model unit. Heavy platform is fitted with rubber disc to hold conical flasks from 50mlm to 1000ml capacity. The shaker is mounted on ball bearing crankshafts to give an orbital circular motion to the flasks. The diameter of the orbit is approximately 2".

The entire assembly is mounted on a rental casing which houses a motor coupled by means of V belt with pitch pulleys. The motors supplied is of Compton Greaves or equivalent make.

Rotary Flask Shaker:

Power requirements To work on 220 Volts, Single phase, 50 Hz, AC supply

Platform Sizes:

Holding Capacity H.P(Motor) 450mm*450mm 16flasks of 250ml 0.25 550mm*550mm 24flasks of 250ml 0.25 850mm*650mm 36flasks 0f 250 ml 0.25

Griffin Flask Shaker

Heavy duty M.S Body mounted on four vibration absorbing rubber legs.AFHP motor is used. The Horizontal Spindle is caused to oscillate through a small angle. Flask of 500ml Capacity each can be mounted at any desired angle on the spindle. Continuously variable speed control can be achieved from a gentel motion to a violent agitation.Unit works on 230V AC, 50 Hz.Supply.

Incubators are widely used for day to day bacteriological and culture tests performed in various applications. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications.We are supplying our bacteriological incubators in India , catering to a variety of customers ranging from defence Installations, Research Laboratories, Educational Institutes and various R&D Laboratories of leading national and multinational companies.

Bacteriological Incubators are double walled convection heated units outer pre- treated withprimers and rust proofing and painted with long lasting stove enamel oe elegantly powder coated.The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade.The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bacteriological incubators. The unit is mounted on a sturdy steel frame and Provided with castor wheel (large Sized Models Only) for easy movement inside the laboratory.The unit is provided with one to three stainless steel shelves(As per the inner size).

Heating:

Indirect heating system is provided in our units, comprising of air heaters made of high grade tublar heaters of suitable wattage .The warm air is evenly distributed throughout the chamber through natural convention.

Temperature Range:

Temperature inside our bacteriological incubators are controlled with a sensitivity of -+0.5oc better.

Front Panel:

Front panel of our units comprises of on/off switches heating and mains indicators lamps, temperature controller/Thermostat,

Temperature Control :

The temperature inside our bacteriological incubators is controlled either through hydraulic type German thermostat (sensitivity -+2oc) or through sold state or micro processor based