We can also make Gas Fired Conveyer Ovens

The heating media used is an oil/ gas fired burner attached to heat exchanger. These are widely used in automotive industry besides various other industries.

• It is similar to Electrical belt Conveyor Oven but it has Oil/Gas fired heat exchanger as heating media instead of electrical heating elements.
• The total fuel consumption varies depending upon the size of working chamber & the working temperature.
• Saves running cost as compared to electrical conveyor oven.
• The air circulation is done with the help of dynamically balanced blowers to achieve uniform temperature throughout the inner chamber.
• Fully automatic imported burners are fitted on the heat exchanger for burning of Oil/ LPG.
• Temperature control: Automatic-Electronic
• Heating Media: Diesel or LPG fired.
• Easy to operate requires minimum training.

KERONE can supply an energy efficient oven to use with your overhead conveyor. The oven can be made to support the conveyor track inside the heated chamber to help contain heat and fumes, or to have a slot on top to for part hangers to pass through. Ovens have been built with part profiles as small as 4"x12" to as large as 8ft x 11ft.

Ovens and control panels are built to be installed quickly, with a minimum of field wiring required. When permitted, all systems are completely factory assembled, set up and tested prior to shipment to assure a simple trouble free start up.

Overhead Conveyor Ovens are used in a wide variety of applications in manufacturing facilities. The most common uses are in the finishing industry for drying, preheating, powder coating pre-gel and cure, and e-coat boost and cure. For more information and advantages also see Booster Oven page.

Whether it is a couple heaters on a frame to roll on line for that stubborn part, or a complete insulated oven with vestibules, we welcome the opportunity to review your process heating challenge. PROTHERM overhead conveyor ovens are a simple economical option to boost line speed, increase production, and improve quality.

KERONE are having +40years experience in designing and manufacturing infrared conveyorised oven that are one of the best suited solution for the process of sand mould curing. We design as per the size and process need of the client.

Feature of the Sand Mould Curing / Drying Conveyors Ovens

• Continuous process due to conveyor
• Heating is highly controllable
• With IR heating system shape requirement is less
• Drying, cooling or calcination.
• Easy maintenance.

Kerone's Heating Oven are designed and manufactured with standard and custom thermal processing system with different configuration.We manufacture high quality of Heating Oven which can be upgraded and configured with the latest technology as per the customer's requirement.Heating Oven are used for electric range ovens, electric stoves and microwave ovens, Oven Heating element.

Kerone also manufacture Industrial oven and various heating system for temperature as high as 400 degree Celsius.Our high quality of manufacturing Industrial oven made us the leading manufacturer of Industrial oven in India. The Quality large capacity Ovens boasts generous size of working chamber and the same time offers extremely distribution.

These are quite suitable for industrial use like Paint Baking, Varnish Baking Plastics granules, drying chemical & powder drying , Electrode drying Taflon coating, Annealing, Core hardening , Aging or Preheating

Construction :

Heavy Angle Frame Structure, covered with M.S. sheet -welded joints.Glass wool insulation to minimum 100 m.m. thick.Double or triple walled construction with mild steel or stainless steel inner chamber.Fill sixe door and runners for trolley at bottom level.Air circulation from side or top motor & blower.

Heating & controls :

Heating is provided by long life S.S. tubler air heaters situated in the side cavities.The heaters are easily replaceable.Working temperature within Oven is controlled by thermostat or Digital controller.Main Switch, Heater Selectors Switch.Amps Meter, Volt meter, Starter for motor, contactor, indicating lamps are provided in control panel

Size & Temperature :

Industrial Oven of 7'*7'*7' and temperature 250Deg.C are available.Bigger size and higher temperature ovens are available on request

We can also make Gas Fired Conveyer Ovens

The heating media used is an oil/ gas fired burner attached to heat exchanger. These are widely used in automotive industry besides various other industries.

• It is similar to Electrical belt Conveyor Oven but it has Oil/Gas fired heat exchanger as heating media instead of electrical heating elements.
• The total fuel consumption varies depending upon the size of working chamber & the working temperature.
• Saves running cost as compared to electrical conveyor oven.
• The air circulation is done with the help of dynamically balanced blowers to achieve uniform temperature throughout the inner chamber.
• Fully automatic imported burners are fitted on the heat exchanger for burning of Oil/ LPG.
• Temperature control: Automatic-Electronic
• Heating Media: Diesel or LPG fired.
• Easy to operate requires minimum training.

KERONE can supply an energy efficient oven to use with your overhead conveyor. The oven can be made to support the conveyor track inside the heated chamber to help contain heat and fumes, or to have a slot on top to for part hangers to pass through. Ovens have been built with part profiles as small as 4"x12" to as large as 8ft x 11ft.

Ovens and control panels are built to be installed quickly, with a minimum of field wiring required. When permitted, all systems are completely factory assembled, set up and tested prior to shipment to assure a simple trouble free start up.

Overhead Conveyor Ovens are used in a wide variety of applications in manufacturing facilities. The most common uses are in the finishing industry for drying, preheating, powder coating pre-gel and cure, and e-coat boost and cure. For more information and advantages also see Booster Oven page.

Whether it is a couple heaters on a frame to roll on line for that stubborn part, or a complete insulated oven with vestibules, we welcome the opportunity to review your process heating challenge. PROTHERM overhead conveyor ovens are a simple economical option to boost line speed, increase production, and improve quality.

KERONE are having +40years experience in designing and manufacturing infrared conveyorised oven that are one of the best suited solution for the process of sand mould curing. We design as per the size and process need of the client.

Feature of the Sand Mould Curing / Drying Conveyors Ovens

• Continuous process due to conveyor
• Heating is highly controllable
• With IR heating system shape requirement is less
• Drying, cooling or calcination.
• Easy maintenance.

Kerone's Heating Oven are designed and manufactured with standard and custom thermal processing system with different configuration.We manufacture high quality of Heating Oven which can be upgraded and configured with the latest technology as per the customer's requirement.Heating Oven are used for electric range ovens, electric stoves and microwave ovens, Oven Heating element.

Kerone also manufacture Industrial oven and various heating system for temperature as high as 400 degree Celsius.Our high quality of manufacturing Industrial oven made us the leading manufacturer of Industrial oven in India. The Quality large capacity Ovens boasts generous size of working chamber and the same time offers extremely distribution.

These are quite suitable for industrial use like Paint Baking, Varnish Baking Plastics granules, drying chemical & powder drying , Electrode drying Taflon coating, Annealing, Core hardening , Aging or Preheating

Construction :

Heavy Angle Frame Structure, covered with M.S. sheet -welded joints.Glass wool insulation to minimum 100 m.m. thick.Double or triple walled construction with mild steel or stainless steel inner chamber.Fill sixe door and runners for trolley at bottom level.Air circulation from side or top motor & blower.

Heating & controls :

Heating is provided by long life S.S. tubler air heaters situated in the side cavities.The heaters are easily replaceable.Working temperature within Oven is controlled by thermostat or Digital controller.Main Switch, Heater Selectors Switch.Amps Meter, Volt meter, Starter for motor, contactor, indicating lamps are provided in control panel

Size & Temperature :

Industrial Oven of 7'*7'*7' and temperature 250Deg.C are available.Bigger size and higher temperature ovens are available on request