The Dura-Flat is a compact emitter specially developed for agriculture. It employs a wide flow path cross-section and an extra-large filtration area which combine to create an effective, efficient agricultural dripper with excellent clogging resistance.

THE OMNIFLOW ADVANTAGE

The Dura-Flat emitter employs the Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water.

EXTRA LARGE FILTER

Dura-Flat has an oversized filtration area along the entire length of the dripper.

ASYMMETRY

The Dura-Flat is a no symmetrical dripper which allows a narrow design suitable for pipe 12mm and 16mm.

QUALITY

The Dura-Flat is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

A Hydro cyclone separates sand and other solid matter from water with very little head loss and 90% or better efficiency. There is no head loss build up and no clogging when the solids are separated. Hydro cyclones are easy to operate and maintain, and have no moving parts or screens.

Versatility in system configurations and ease of installation are some of its great advantages.

A Hydro cyclone uses a tangential injection flow process, enhancing the centrifugal forces and moving solid particles outwards. The dispersed particles move downward in a spiral path into an underflow chamber (sedimentation tank) while clean liquid moves upwards to the centre of the spiral, towards the top outlet.

A specially designed rubber insert protects the neck of the Hydro cyclone from erosion and increases separation efficiency. The Sedimentation Tank can be drained automatically with an automatic flushing kit (an electric valve, controller and small command filter). Automatic flushing will not interfere with the proper functioning of the Hydro cyclone. The Hydro cyclone has a 100 micron protective coating of extra durable polyester applied electrostatically and oven cured on a zinc-phosphate layer for maximal anti-corrosion protection.

• Union assembly ball valve is manufactured from polypropylene a chemically inert thermoplastic.
• Union assembly ball valve is specially suited for drip irrigation system and other water flow control.
• Online maintenance is possible in this valve as all internals can be replaced withount removing the vale from the pipeline.
• Union assembly ball valve contains no metal part, failure due to corrosion eliminated widely used by chemical industries.
• Union assembly ball valve possess excellent ultraviolet resistivity due to presence of carbon on black
• Proper care taken for full strength and leakage proof manufacturing design.
• Hydraulically tested at 10 kg/cm2
• Union assembly ball valve is approved and used by many drip irrigation manufacturers.

This dripper is a low flow emitter specially developed for well water agriculture applications where there is a high degree of suspended solids. It employs an extra-large flow path cross-section, a very long Omniflow labyrinth, and an elevated filter, which combine to create an agricultural dripper with unparalleled clogging resistance.

THE OMNIFLOW ADVANTAGE

This dripper emitter employs the patented Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water.

LONG LABYRINTH

This dripper has a very long labyrinth with a large cross-sectional area. The long flow path ensures a gradual drop in pressure over the entire emitter. It also ensures that gradual and unavoidable sedimentation on the labyrinth surface will not clog the emitter.

ELEVATED FILTER

This dripper has an elevated filter which has several benefits. The elevated filter draws from water that is closer to the centre of the pipe where water is traveling at high velocity. The higher velocity helps keep the filter surface clean. Also the elevation of the filter entrance inhibits solids from settling on it between flow cycles, regardless of dripper orientation in the pipe.

QUALITY

The dripper is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

COMPACT ROUND DRIPPER

This is compact emitter specially developed for agricultural applications. It employs a wide flow path cross-section and up to three separate filter entrances which combine to create an effective, efficient dripper with excellent clogging resistance.

THE OMNIFLOW ADVANTAGE

This emitter employs the patented Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water.

EXTRA FILTRATION

It has up to three separate filters, which has several benefits. Filters are on opposing sides to ensure that at least one of the filters will not be in the undesirable downward position regardless of dripper orientation in the pipe. The filters are also on opposing ends of the dripper so that at least one filter is always near the upstream end of the emitter, which has anti-clogging benefits.

LARGE LABYRINTH

Its labyrinth has a large cross-sectional area which reduces the risk of clogging.

QUALITY

The Monsoon dripper is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

Drippers

Applications :

• On-surface multi seasonal row crops.

Specifications :

• Pressure-compensating range: 0.4-2.5/3.0 bar (according to flow rate model & dripper lines wall-thickness)
• Recommended filtration: according to drippers flow rate.
• Labyrinth with large water passage.
• A wide assortment of dripper lines wall thickness (0.31, 0.34, 0.38, 0.50, and 0.63 mm).
• Injected dripper, very low CV.
• Injected silicon diaphragm
• UV resistant. Resistant to standard nutrients used in agricultural

Features and Benefits :

• Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water and nutrient distribution along the laterals.
• Continuously self-flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted dripper operation.
• Self-flushing system with wide filtration area improves resistance to clogging thus making pc highly resistant when using low quality water.
• Labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance. Widest water passages within the dripper.
• The water is drawn in to the dripper from the stream centre, preventing the entrance of sediments in to the drippers.
• Injected silicon diaphragm
• UV resistant. Resistant to standard nutrients used in agricultural

2. 50 m3/h/m2 (20 gpm/ft2) for dirty water.

For special water conditions, e.g. iron content and recycled water, other media typesare available at lower flow rates please consult our service department or your distributor

1. Weekly

• Once a week perform a manual back flush, make sure that the differential pressure isbelow 0.25 bar (4 psi), after the back flush.

2. Monthly

• Close valves at the inlet and outlet of filters.
• Release pressure within the filter and open the top filling port.
• Inspect media level and its cleanliness. If media is missing add to required level.
• If the media is not effective anymore (long usage, or tough caking), perform chlorination treatment (see clause 3 bellow) or according to the following instructions.

REPLACING THE FILTERS MEDIA

• Replace the gravel when the amount of dirt (that cannot be back flushed), prevents proper functioning of the filter.
• Close all the valves.
• Open the filter drain plug, to release the pressure and to drain all the filters water.
• Open the top filling port.
• Open with care the side service ports.
• Empty the gravel from the filter, through the side service ports.
• Rinse the interior thoroughly with clean water.
• Inspect the double bottom of the filter including the partition and the mushrooms diffusers.
• Check the protective coating for damage and repair if necessary.
• Close the side service ports with covers and tighten properly.
• Fill the filter through the top filling port with the right amount of gravel and shut the top filling port and tighten the cover properly.
• Check the Flow Limit Valve, or readjust the Throttle Valve (F) Back flush the filter with the new gravel to wash out dirt and dust, for at least two minutes.
• Open the valves for normal operation (see installation) Maintenance Instructions

General Notes :

• For efficient filtration the media should be crushed with sharp edges, .
• Flow recommendation according to dirt load (for crushed granite and crushed basalt) :
• 1. 75 m3/h/m2 (30 gpm/ft2) for average water condition.
• 2. 50 m3/h/m2 (20 gpm/ft2) for dirty water.
• For special water conditions, e.g. iron content and recycled water, other media types are available at lower flow rates please consult our service department or your distributor.
• Minimum media grain size: 0.6 mm.
• 1. Weekly
• Once a week perform a manual back flush, make sure that the differential pressure is below 0.25 bar (4 psi), after the back flush.
• 2. Monthly
• Close valves at the inlet and outlet of filters.
• Release pressure within the filter and open the top filling port.
• Inspect media level and its cleanliness. If media is missing add to required level.
• If the media is not effective anymore (long usage, or tough caking), perform chlorination treatment (see clause 3 bellow) or according to the following instructions.

REPLACING THE FILTERS MEDIA

• Replace the gravel when the amount of dirt (that cannot be back flushed), prevents proper functioning of the filter.
• Close all the valves.
• Open the filter drain plug, to release the pressure and to drain all the filters water.
• Open the top filling port.
• Open with care the side service ports.
• Empty the gravel from the filter, through the side service ports.
• Rinse the interior thoroughly with clean water.
• Inspect the double bottom of the filter including the partition and the mushrooms
• Check the protective coating for damage and repair if necessary.
• Close the side service ports with covers and tighten properly.
• Fill the filter through the top filling port with the right amount of gravel and shut the top filling port and tighten the cover properly.
• Check the Flow Limit Valve, or readjust the Throttle Valve (F) Back flush the filter with the new gravel to wash out dirt and dust, for at least two minutes.
• Open the valves for normal operation (see installation)

• Available in Flange Type & in screw end from 15 mm to 100 mm.
• Manufactured from Polypropylene, a Chemically inert thermoplastic.
• Can be used upto 90C Temp.
• Full bore design resulting lower friction loss.
• Hydraulically and Pneumatically tested for 15 Kg up to 4.
• Protective and Resistive from most of the corrosive Chemicals.
• Carbon black and UV stabilizers resist ultraviolet rays and prevent degradation of PP in sun light exposure.
• Approved and used by many known Drip Irrigation manufacturers.

One Piece Top Entry ball valve is manufactured from polypropylene, a chemically inert thermoplastic.One piece ball valve is specially suited for Drip Irrigation System and Sugar Industries.One-piece rugged body eliminates joints / unions / Gaskets / Fasteners and consequently eliminates leakage and corrosion. Fewer Parts lower inventory of spares.On line maintenance possible as all internals can be replaced without removing the valve from the pipe-line.Since this ball valve contains no metal parts, failure due to corrosion eliminated. Widely used by chemical industries.Excellent ultraviolet resistivity due to presence of carbon black.Proper care taken for full strength and leakage proof manufacturing design.Hydraulically tested at 10kg.CM.Approved and under use by many renowed Drip Irrigation manufacturers

These assemblies are primarily used for irrigation purposes as these possess a high pressure recovery. As these are less prone to erosion, the assembly offers low installation

Features :

• Delivers plant nutrients directly into the wet zone (where root development is intensive)
• In-built check valve for protecting the injected liquid against back flow
• Can be used with a large variety of chemicals
• Uniform application of fertilizers
• Saves Energy & Manpower
• Optimum performance
• Easy to install
• Longer service life

Superior grade, economical prices and unmatched standard distinguishes our Drip Irrigation Pipe from others in the market. We are situated in Gujarat(India) and we have a well-developed network that assists us in reaching any destination.

The Dura-Flat is a compact emitter specially developed for agriculture. It employs a wide flow path cross-section and an extra-large filtration area which combine to create an effective, efficient agricultural dripper with excellent clogging resistance.

THE OMNIFLOW ADVANTAGE

The Dura-Flat emitter employs the Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water.

EXTRA LARGE FILTER

Dura-Flat has an oversized filtration area along the entire length of the dripper.

ASYMMETRY

The Dura-Flat is a no symmetrical dripper which allows a narrow design suitable for pipe 12mm and 16mm.

QUALITY

The Dura-Flat is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

A Hydro cyclone separates sand and other solid matter from water with very little head loss and 90% or better efficiency. There is no head loss build up and no clogging when the solids are separated. Hydro cyclones are easy to operate and maintain, and have no moving parts or screens.

Versatility in system configurations and ease of installation are some of its great advantages.

A Hydro cyclone uses a tangential injection flow process, enhancing the centrifugal forces and moving solid particles outwards. The dispersed particles move downward in a spiral path into an underflow chamber (sedimentation tank) while clean liquid moves upwards to the centre of the spiral, towards the top outlet.

A specially designed rubber insert protects the neck of the Hydro cyclone from erosion and increases separation efficiency. The Sedimentation Tank can be drained automatically with an automatic flushing kit (an electric valve, controller and small command filter). Automatic flushing will not interfere with the proper functioning of the Hydro cyclone. The Hydro cyclone has a 100 micron protective coating of extra durable polyester applied electrostatically and oven cured on a zinc-phosphate layer for maximal anti-corrosion protection.

• Union assembly ball valve is manufactured from polypropylene a chemically inert thermoplastic.
• Union assembly ball valve is specially suited for drip irrigation system and other water flow control.
• Online maintenance is possible in this valve as all internals can be replaced withount removing the vale from the pipeline.
• Union assembly ball valve contains no metal part, failure due to corrosion eliminated widely used by chemical industries.
• Union assembly ball valve possess excellent ultraviolet resistivity due to presence of carbon on black
• Proper care taken for full strength and leakage proof manufacturing design.
• Hydraulically tested at 10 kg/cm2
• Union assembly ball valve is approved and used by many drip irrigation manufacturers.

This dripper is a low flow emitter specially developed for well water agriculture applications where there is a high degree of suspended solids. It employs an extra-large flow path cross-section, a very long Omniflow labyrinth, and an elevated filter, which combine to create an agricultural dripper with unparalleled clogging resistance.

THE OMNIFLOW ADVANTAGE

This dripper emitter employs the patented Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water.

LONG LABYRINTH

This dripper has a very long labyrinth with a large cross-sectional area. The long flow path ensures a gradual drop in pressure over the entire emitter. It also ensures that gradual and unavoidable sedimentation on the labyrinth surface will not clog the emitter.

ELEVATED FILTER

This dripper has an elevated filter which has several benefits. The elevated filter draws from water that is closer to the centre of the pipe where water is traveling at high velocity. The higher velocity helps keep the filter surface clean. Also the elevation of the filter entrance inhibits solids from settling on it between flow cycles, regardless of dripper orientation in the pipe.

QUALITY

The dripper is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

COMPACT ROUND DRIPPER

This is compact emitter specially developed for agricultural applications. It employs a wide flow path cross-section and up to three separate filter entrances which combine to create an effective, efficient dripper with excellent clogging resistance.

THE OMNIFLOW ADVANTAGE

This emitter employs the patented Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water.

EXTRA FILTRATION

It has up to three separate filters, which has several benefits. Filters are on opposing sides to ensure that at least one of the filters will not be in the undesirable downward position regardless of dripper orientation in the pipe. The filters are also on opposing ends of the dripper so that at least one filter is always near the upstream end of the emitter, which has anti-clogging benefits.

LARGE LABYRINTH

Its labyrinth has a large cross-sectional area which reduces the risk of clogging.

QUALITY

The Monsoon dripper is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

Drippers

Applications :

• On-surface multi seasonal row crops.

Specifications :

• Pressure-compensating range: 0.4-2.5/3.0 bar (according to flow rate model & dripper lines wall-thickness)
• Recommended filtration: according to drippers flow rate.
• Labyrinth with large water passage.
• A wide assortment of dripper lines wall thickness (0.31, 0.34, 0.38, 0.50, and 0.63 mm).
• Injected dripper, very low CV.
• Injected silicon diaphragm
• UV resistant. Resistant to standard nutrients used in agricultural

Features and Benefits :

• Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water and nutrient distribution along the laterals.
• Continuously self-flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted dripper operation.
• Self-flushing system with wide filtration area improves resistance to clogging thus making pc highly resistant when using low quality water.
• Labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance. Widest water passages within the dripper.
• The water is drawn in to the dripper from the stream centre, preventing the entrance of sediments in to the drippers.
• Injected silicon diaphragm
• UV resistant. Resistant to standard nutrients used in agricultural

2. 50 m3/h/m2 (20 gpm/ft2) for dirty water.

For special water conditions, e.g. iron content and recycled water, other media typesare available at lower flow rates please consult our service department or your distributor

1. Weekly

• Once a week perform a manual back flush, make sure that the differential pressure isbelow 0.25 bar (4 psi), after the back flush.

2. Monthly

• Close valves at the inlet and outlet of filters.
• Release pressure within the filter and open the top filling port.
• Inspect media level and its cleanliness. If media is missing add to required level.
• If the media is not effective anymore (long usage, or tough caking), perform chlorination treatment (see clause 3 bellow) or according to the following instructions.

REPLACING THE FILTERS MEDIA

• Replace the gravel when the amount of dirt (that cannot be back flushed), prevents proper functioning of the filter.
• Close all the valves.
• Open the filter drain plug, to release the pressure and to drain all the filters water.
• Open the top filling port.
• Open with care the side service ports.
• Empty the gravel from the filter, through the side service ports.
• Rinse the interior thoroughly with clean water.
• Inspect the double bottom of the filter including the partition and the mushrooms diffusers.
• Check the protective coating for damage and repair if necessary.
• Close the side service ports with covers and tighten properly.
• Fill the filter through the top filling port with the right amount of gravel and shut the top filling port and tighten the cover properly.
• Check the Flow Limit Valve, or readjust the Throttle Valve (F) Back flush the filter with the new gravel to wash out dirt and dust, for at least two minutes.
• Open the valves for normal operation (see installation) Maintenance Instructions

General Notes :

• For efficient filtration the media should be crushed with sharp edges, .
• Flow recommendation according to dirt load (for crushed granite and crushed basalt) :
• 1. 75 m3/h/m2 (30 gpm/ft2) for average water condition.
• 2. 50 m3/h/m2 (20 gpm/ft2) for dirty water.
• For special water conditions, e.g. iron content and recycled water, other media types are available at lower flow rates please consult our service department or your distributor.
• Minimum media grain size: 0.6 mm.
• 1. Weekly
• Once a week perform a manual back flush, make sure that the differential pressure is below 0.25 bar (4 psi), after the back flush.
• 2. Monthly
• Close valves at the inlet and outlet of filters.
• Release pressure within the filter and open the top filling port.
• Inspect media level and its cleanliness. If media is missing add to required level.
• If the media is not effective anymore (long usage, or tough caking), perform chlorination treatment (see clause 3 bellow) or according to the following instructions.

REPLACING THE FILTERS MEDIA

• Replace the gravel when the amount of dirt (that cannot be back flushed), prevents proper functioning of the filter.
• Close all the valves.
• Open the filter drain plug, to release the pressure and to drain all the filters water.
• Open the top filling port.
• Open with care the side service ports.
• Empty the gravel from the filter, through the side service ports.
• Rinse the interior thoroughly with clean water.
• Inspect the double bottom of the filter including the partition and the mushrooms
• Check the protective coating for damage and repair if necessary.
• Close the side service ports with covers and tighten properly.
• Fill the filter through the top filling port with the right amount of gravel and shut the top filling port and tighten the cover properly.
• Check the Flow Limit Valve, or readjust the Throttle Valve (F) Back flush the filter with the new gravel to wash out dirt and dust, for at least two minutes.
• Open the valves for normal operation (see installation)

• Available in Flange Type & in screw end from 15 mm to 100 mm.
• Manufactured from Polypropylene, a Chemically inert thermoplastic.
• Can be used upto 90C Temp.
• Full bore design resulting lower friction loss.
• Hydraulically and Pneumatically tested for 15 Kg up to 4.
• Protective and Resistive from most of the corrosive Chemicals.
• Carbon black and UV stabilizers resist ultraviolet rays and prevent degradation of PP in sun light exposure.
• Approved and used by many known Drip Irrigation manufacturers.

One Piece Top Entry ball valve is manufactured from polypropylene, a chemically inert thermoplastic.One piece ball valve is specially suited for Drip Irrigation System and Sugar Industries.One-piece rugged body eliminates joints / unions / Gaskets / Fasteners and consequently eliminates leakage and corrosion. Fewer Parts lower inventory of spares.On line maintenance possible as all internals can be replaced without removing the valve from the pipe-line.Since this ball valve contains no metal parts, failure due to corrosion eliminated. Widely used by chemical industries.Excellent ultraviolet resistivity due to presence of carbon black.Proper care taken for full strength and leakage proof manufacturing design.Hydraulically tested at 10kg.CM.Approved and under use by many renowed Drip Irrigation manufacturers

These assemblies are primarily used for irrigation purposes as these possess a high pressure recovery. As these are less prone to erosion, the assembly offers low installation

Features :

• Delivers plant nutrients directly into the wet zone (where root development is intensive)
• In-built check valve for protecting the injected liquid against back flow
• Can be used with a large variety of chemicals
• Uniform application of fertilizers
• Saves Energy & Manpower
• Optimum performance
• Easy to install
• Longer service life

Superior grade, economical prices and unmatched standard distinguishes our Drip Irrigation Pipe from others in the market. We are situated in Gujarat(India) and we have a well-developed network that assists us in reaching any destination.